Q:Can cement board be used as a decorative plate? Where to sell?

You want to use the decoration should be used, such as crystal cryolite, the surface of the same effect as the real stone, followed by A1 grade fire cement pressure plate, The effect is very good,

Q:How to use the wall decoration board

The size of the entire decorative plate is 2440 mm × 220 mm. Install the first size according to the design of cutting, the board cut into the required specifications, the cutting point must be straight. The wall and decorative panels on the back of the brushing adhesive, pay attention must be fully coated, do not have the part of the brush, the wall should be pre-play a good control line pavement, compaction, until the adhesive dry hard, with silicon Patching or pressing. There is the mouth of the decorative plate width of 90 mm or l65 mm, the length of the general 2440 mm, should be used vertically, the installation should first press the design size of the material, the need for parquet should be cut on the flower after the puzzle Cutting. Before installation, the wall and the back of the board should be coated with adhesive, the adhesive in the upper, lower and middle parts can be painted, the installation of vertical compaction compaction, until the adhesive dry, with wood line pressure side closure. After installation of the wall decoration board, it is necessary to clean the extruded glue in time to prevent contamination of the board. Wall decoration board can be used after installation, no need to paint varnish and other surface decoration. Wall-mounted decorative panels are required to be flat, hard, clean and dry, and the treatment is the same as the wooden dado.

Q:Has anyone used a natural dregs of clay to decorate the board?

Diatom mud itself without any pollution, and there are many functions, is the latex paint and wallpaper and other traditional paint can not match. With diatom mud decoration is not moving, because, in the construction of diatom mud in the process of no taste.

Q:Great Wall c30a column decorative board buckle how to install, with a few buckle?

Hello, first put the seat belt side of the screw apart, 6 buckle around

Q:Pvc steel decorative plate toxic?

PVC material itself is non-toxic

Q:Transparency and acrylic panels are almost decorative boards but the plates are lighter than acrylic and can you use slices with plane trims?

The current market and its transparency similar to the purchase of the plate, and can use the plane trim the board are: (PVC, PC, PU,) and nylon and other sheet, please note that the transparency of the board is usually hard, The amount of feed should be less to prevent the side of the repair is not smooth uneven consequences.

Q:Buick Hideo gt how to open the doors and windows outside the black decorative plate

A total of three screws removed, respectively, in the door handle trim and door lock buckle slot, the surrounding plastic buckle is broken apart, the plastic buckle may be worse,

Q:What is the best decorative works?

Decorative panel style is not good or bad points, mainly their favorite wood pattern, points is good or bad depends on the quality of the floor and the texture and thickness of the skin, you can distinguish in two ways. 1: skin texture smooth, natural, in their own purchase number of decorative panels within the basic texture uniform, uniform color, hand-decorated panel surface can be flat. 2: the thickness of the decorative panel 3mm and 4mm, 3mm thickness of the decorative panel skin thickness is generally 30 silk (0.3mm), after grinding the finished product only 10-20 wire. 40mm thickness of the decorative panel skin thickness is generally 60 silk (0.6mm), after grinding the finished product there are 35-45 silk or so, from the senses certainly better than 30mm thickness of the decorative panels better, of course, there are businesses to 40mm thickness Of the decorative panels with thin skin to paste, this will own more to see a few, more to judge the comparison.

Q:Audi q3 tires decorative panels how to disassemble

Hello! Buy tires first to determine the specifications of the original vehicle tires. Usually the car tire size logo is *** / ** R *** part is the number. (For example: 205 / 55R16) to buy the tire specifications must be consistent with the original car assembly tire specifications, if necessary to change the tire specifications must go to a professional modified store for tire upgrades, or consult the car manufacturer.

Q:PVC decorative decorative plate how much money a square meter ah?

Because this material for a long time easy to aging! The general price of 50 dollars or so. However, the market is not the same, the price is not the same.