Standard Size: 595mm*595mm, 605mm*605mm
Standard Thickness: 9, 10, 12, 14, 15, 18mm
Edge Detail: Square Edge, Tegular Edge (≥12mm)
Technical Data of Mineral Fiber Ceiling:
Fire resistance: Class B1 (standard GB 8624-1997)
Moisture rate (%): ≤3.5 (40℃,70%RH)
Light reflect: 0.70-0.80
Sagging resistant properties: ≤0.35mm
Humidity Resistance: ≥85%
Typical Application Areas of Mineral Fiber Ceiling:
Hotel Lobbies and Corridors
Offices and conference rooms
Hospitals and other Public areas
- Q:What are the characteristics of insulation decorative panels
- Here we have to TDD exterior insulation decorative board as an example to introduce the external wall insulation decorative board this new building materials advantages. First, for everyone is well aware of the most valuable advantage is the ability to play on the building insulation function, making the building to achieve the effect of Dongnuanxialiang. Due to the physical properties of the insulation board, the winter can keep the temperature, the summer can block the external temperature, making the indoor temperature to maintain a relatively stable level. Second, because the external wall insulation material to protect the walls of concrete and brick walls from external erosion and damage, so the insulation board is also able to extend the service life of the building. At the same time, because the external wall insulation decorative board to keep the room temperature stability, but also can play a protective building wall does not appear cracking, deformation of the situation.
- Q:Bedroom wall decoration board with what kind of material is good
- Beauty is not only environmentally friendly non-toxic and tasteless, has a strong water resistance and acid and alkali resistance, and can not afford the skin does not fade, no cracking without seams, to ensure the use of more than fifteen years. There are good moisture, antibacterial properties, not easy to insects, not aging and many other advantages. The most important thing is the pattern of diverse styles, according to their own wishes to do personalized design.
- Q:The new Santana b column has an airbag how to remove the b pillar trim panel
- This must start from the a column can be opened directly to pull open, his guard, no screws.
- Q:How to remove the British Long door trim
- The surrounding plastic buckle is broken apart, the plastic buckle may be bad, so before ready
- Q:Microcrystalline stone uv decorative plate with no radiation
- Production of microcrystalline stone recommended Toshiba uv printer, which uses a Toshiba nozzle, ink point for the 5PL, print speed faster than Epson 2 times, print accuracy than Ricoh's high life in 24 months to 36 months, There are also 2 years warranty.
- Q:Bottom filter tank Bottom cabinet Decorative board with acrylic board Good or glass is good
- Not let you use logs, just want to talk to you and the surrounding environment and harmony, acrylic or glass is not the only choice.
- Q:Clean the operating room floor and wall requirements which
- Operating room decoration requirements of the wall
Hospital operating room wall should use light search steel keel partition, to facilitate a variety of pipeline and wall fixed equipment concealed. Surface layer should be used with high hardness, good integrity, sewing less, tightly sealed decorative materials. Can be used 1150 color steel plate, combined with the outlet, return air, observation window, embedded view film lights, equipment cabinets, disinfection cabinet, switch interface, the wall into a whole, to minimize the convex surface and cracks. The wall can be tilted 3 degrees, not only can reduce the dust, and can reflect the angle of light is conducive to health care personnel operation. Can choose the Austrian-made WAX anti-special plate - to strengthen the board. Aseptic wall can be used 600 × 600mm light green tiles a pass to the top. Skirting board should be concave into the wall 1cm, and with the ground into one, corner radius of 40mm rounded corners. Channel on both sides and corner of the wall should be set up two anti-collision board.
- Q:What are the new interior wall trim plates?
- These products compared with the traditional wall decoration materials, the protection of the wall better, waterproof fire, construction is simple and quick, and more healthy and environmentally friendly, free of formaldehyde, benzene and other harmful substances.
- Q:Does the decorative board need to paint a layer of paint?
- Construction technology measures: 5.1 find and play line: wood wall panels should be installed according to the design Atlas requirements, in advance to find a good elevation, flat position, vertical size of the elastic line. 5.2 Check the embedded parts and holes: After the bumper line to check whether the embedded parts, wood bricks or wooden wedge meet the design requirements, spacing spacing size, position to meet the requirements of the lapel keel; measuring doors and windows and the location of the size of the vertical And design requirements are consistent. 5.3 shop, coated with moisture-proof layer: the design of moisture-proof requirements when the wooden wall, wood keel installation must find a square, looking straight, skeleton and wood between the gap should be pad mats, each brick at least 2 nails nail, And then put the keel should be set aside when the board thickness. Wood keel and wall contact surface to be anti-corrosion treatment, the remaining three sides of not less than three times the treatment of fire paint. 5.4 Lining installation: After the installation of the keel to check the qualified installation of 15mm thick woodworking board to do lining, requiring liner nail firm, nail fixed spacing control in 200mm or so, the back brush fire paint, splicing board should be reserved between the 5mm Around the expansion of the gap, to ensure that the amount of expansion and contraction of temperature.
- Q:Whether the interior trim can change color
- Generally can only do better than your original color of the color can reveal the wood, if you do white, unless you do all the paint, you can cover all, but can not reveal the wood
SERENITY,is a large company which produces light mineral wool acoustic board. It displays a good combination of production , manufacture, supporting sales and international trade.Its products cover more than twenty varieties of six categories, including knurling board, relief-embossing board, printing board, spraying board, stereo-molding board, etc.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
||Japan, Italy, South- Africa ,India, Russia, Malaysia, Singapore, Taiwan and other countries and areas
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range