Q:Open the cabinet factory how to choose edge machine, cutting saw and drill

Open cabinets factory, select equipment according to sales orders and the size of their own investment to determine.

Q:Why do I bench sawing, cutting the total to the left.

As far as possible to ensure that the blade itself is parallel or coincident line drawn by after blade cuts into the workpiece, there is no time to observe the deviation, if the deviation should be timely correction.

Q:What are the advantages and disadvantages of sawing machine sawing and multi piece?

In the sawing range, a plurality of saw blades can be installed according to the thickness requirement of the processing plate, and a plurality of plates with different thicknesses can be sawed off at one time. The tension of the saw blade is good, the precision of the saw is high, and the surface quality is good.The utility model can avoid the operation procedures of multiple positioning, clamping, lateral feeding, etc., and the auxiliary time and the idle stroke are shortened, so the production efficiency is high."Sawing machine faults" is not according to the wood defects of reasonable sawing, finished sheet material rate lower than under the same conditions the band saw the outturn rate, high requirements for the quality of sawing logs, the processed material quality grading and sorting. The reciprocating motion of frame produced huge inertia and vibration, increases the wear limit, the cutting speed increases. Therefore, the production efficiency is also limited.

Q:What's the use of wire saw in diamond tools?

Use of diamond rope like marble granite, diamond wire saw, but above the granite series diamond contained diamond for better quality, higher prices, so the cost is higher. At present in granite mining there are more and more used in wire saw cutting process, can greatly reduce the waste, and safety, higher efficiency, although the purchase cost is higher, but in the long term, comprehensive cost is much lower than the explosion produced by the traditional cost system. Special diamond wire saw can be formulated according to the special requirements of customers, is mainly processed by diamond saw blades and other cutting tools can complete the task of cutting, general stone products the larger diameter or larger. Due to the special properties of the wire saw, a new tool has good market foreground, is a miniature wire sawing industry called "diamond wire saw", Wire diameter can be 0.2mm, he can machining high precision circuit board slot, and no burr, the accuracy is very high, not influenced by the size limit. This is a new tool, the future play unbelievable role in circuit boards, electrical and other industries will be.

Q:What kind of saw blade is used on melamine board?

The choice of the main blade cutting saw. Are all the basic 3.2MM thickness, aperture is usually 30 aperture is 305MM (outer diameter part soil saw is 250MM), in order to view more smooth, generally used in the majority of 96 teeth, but the price is relatively high, if the number of teeth is less enough that do not have to use the 96 teeth, 72 teeth, you can choose or 60 teeth can be. The shape of the tooth is usually more than that of the ladder, so that the section is smooth and less prone to collapse. So the general as follows: 305MM diameter * tooth number 96T* thickness 3.2* aperture 30- ladder flat tooth

Q:What kind of saw blade is used for sawing wood lines?

It is recommended to use plain saw frames in carbide saw blades, 255*3.0*30*120, i.e., 255MM outer diameter, 3.0MM blade thickness, 30mm inner diameter, 120 teeth. The cutting aluminum saw blade is different from the cutter head at first, and the tooth shape is different.

Q:The prestressing tendon should be cut off by grinding wheel saw or cutting machine. Why can't arc cutting be adopted?

Prestressed reinforcement is in the component has no load, the reinforced tension, if heated, reinforced soft, elongated, such as steel and loosened, no tension, no prestress, prestress loss.

Q:What's the difference between a saw and an engraving machine?

In some cases, the engraving machine can be used as a saw machine. As long as the engraving depth of the engraving machine can be penetrated through the whole workpiece, it can be used as a saw machine.

Q:How can the cutter change the saw blade?

Remove the blade, cutting saw itself marked with a saw blade rotation direction, the screw pressing nut fixed blade and blade rotation is opposite, the rotary blades with rotating bolt tightening trend, in replacement of saw blade when the first blade wrench is fixed, and then cut down according to the direction of the arrow cap itself. The rotation above can put down the blade.

Q:The use of cutting small pieces of jade saw blades

Resin saw clear method is the use of alkaline soaking, with 600g/L sodium hydroxide solution under the condition of 130 DEG C, soak for 30 minutes, you can clear resin, but the blade will become red brown, if sodium nitrite added 150g/L will not turn red to blue black or grey black color but. The high temperature steel bluing and almost no chemical gas in the process, but the high-temperature alkaline operation should pay attention to, never touch the skin. Strong alkali solution breaks down the resin, sodium nitrite, prevents rust.