China Graphite Electrode for EAF Furnace with Very Good Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 15 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality Graphite Electrode For EAF Furnace
Packaging Details:
1: Wooden crates with steel straps; wooden crates treated with "IPPC" label
2: standard export fumigated wooden box with steel strip fixed outside
3: In wooden case, each nipple must be packed in cardboard box.
Each electrode and nipple to preset at one end. The head of the preset nipple shall be covered by cardboard cap supported by wooden plate from both ends to avoid damage to the threads during transportation
Delivery Detail: 15-45 days after confirming the contract
Production Description:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm. Our products own the following characteristics: low electric resistance, good electric and thermal conductivity, high oxidation resistance, greater resistance to thermal and mechanical shock, high mechanical strength, high machining accuracy.
Physical and chemical index
Item | Unit | Nominal Diameter(mm) | |||
YB/T4088-2000 Industry Standard | Typical Values | ||||
300-400 | 450-550 | 350-550 | |||
Resistance | Electrode | ohm | ≤6.2 | ≤6.5 | 4.6-6.2 |
Nipple | ≤5.5 | ≤5.5 | 3.5-4.5 | ||
Bending Strength | Electrode | Mpa | ≥10.5 | ≥10.0 | ≥11.0 |
Nipple | ≥16.0 | ≥16.0 | ≥18.0 | ||
Elastic Modulus | Electrode | Gpa | ≤14.0 | ≤14.0 | ≤13.0 |
Nipple | ≤18.0 | ≤18.0 | ≤17.0 | ||
Density | Electrode | g/cm3 | ≥1.65 | ≥1.64 | 1.65-1.72 |
Nipple | ≥1.72 | ≥1.70 | 1.75-1.82 | ||
Ash content | Electrode | % | ≤0.3 | ≤0.3 | ≤0.3 |
Nipple | |||||
CTE(100-600) | Electrode | 10-6/C | ≤1.5 | ≤1.5 | 1.20-1.40 |
Nipple | ≤1.4 | ≤1.4 | 1.10-1.30 | ||
- Q:What's the purpose of the electrode material?When the electrolytic molten state of NaCl is said, what is the use of the graphite electrode and the iron electrode?
- The copper electrode used for finishing size of the copper electrode discharge speed is not fast but spent graphite electrode is relatively smallRequirements of the high surface, the appearance of products are copper electrode discharge processingThe iron electrode is not clear enough to be used
- Q:What are the structures of pyrolytic graphite electrodes? What are their properties and applications? We hope that some details will not be found
- The high purity graphite component is put into the furnace, and nitrogen and methane are produced under vacuum high temperature. Then graphite is shown to produce 10% coating.
- Q:After vacuum melting of quartz crucible, there are three graphite electrode rods. What's the adjustment?
- Or did you adjust the electrode when it was installed? There are two electrode distance, two away, causing melting after different lengths.
- Q:Why should the carbon brush for the trolley be made of graphite?
- What you said is the graphite electrode graphite, there may be a high pure graphite graphite conductive rate so high, strong, high density, the graphite is mostly used in motor vehicles, such as generators, and electric tools.
- Q:How can the graphite powder be processed into high quality carburizing agent? Thank you
- If you are through the material can also be screened and then sold, usually 1-5 of the particle size, fine powder can only add adhesive column
- Q:Use of graphite in steelmaking
- At present in the world (MgO-C brick raw material for graphite and magnesium) as refractory material, has been widely used in steelmaking, has become a traditional use of graphite.
- Q:How to solve the problem of graphite electrode being crushed during electrolysis
- There's no way. It's an industrial problem, and that's how graphite works.
- Q:How does graphite produce solar cells?
- The team at the Massachusetts Institute of Technology has confirmed that electrodes based on graphene and ITO devices are comparable in efficiency. Although the power conversion efficiency of graphene is 4.2% lower than that of a general silicon cell, it will be competitive for special use in the future.
- Q:800KVA and 12500 EAF transformer data graphite electrode furnace.
- Graphite project: Project Description: steel furnace and iron smelting furnace, ferrosilicon smelting, electrolytic aluminum and so on, all use large surface graphite electrode.
- Q:Specification for graphite electrodes commonly used in steel works
- The variety and specifications of graphite electrodes used in modern EAF steelmaking are mainly determined by the technical parameters of the steelmaking furnace. With the development of EAF steelmaking technology, the steel-making technology is developing towards large scale and ultra high power. The graphite electrode is mainly made of large size graphite electrode and ultra high power graphite electrode.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
China Graphite Electrode for EAF Furnace with Very Good Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 15 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
