Q:Why should graphite paper be placed between the heater and the graphite electrode?

Heater design, the common heater has three shapes, cylinder, cup, spiral, the vast majority of the current heater is cylindrical, as shown in figure. The spiral heater has complicated processing technology and has been eliminated. Cup shaped heater for hemispherical crucible, the bottom melt temperature is more uniform, because the processing technology is difficult, already no use. Nowadays, most of them use cylinder heaters. The cylindrical heater is not only easy to process, but also is related to the large number of flat crucible used in the direct drawing single crystal furnace.

Q:Synthesis techniques of carbon nanotubes

Catalytic pyrolysis is one of the widely used methods for preparing carbon nanotubes. The method mainly uses transition metal as catalyst, and is suitable for large-scale preparation of carbon nanotubes. The content of carbon nanotubes in the products is higher, but the defects of carbon nanotubes are more.

Q:Please senior doubts. The graphite electrode is used in the mold cavity In what case is graphite processing taken?

Instead of copper as discharge material.1. Electrode design1 can reduce the number of individual electrodes / can be made into a composite electrode2, it can save the electrode clamp system and save the cost2, the electrode processing1, high speed milling rough processing copper block 3 times2, high-speed milling finishing faster than copper 5 times3. Good machinability4, complex geometric modeling can be realized3, light weight, its density is less than 1/4 of copper1, good thermal stability (without deformation)2 can reduce the number of individual electrodes / can be made into a composite electrode3, without deburring4. The electrode is easy to clamp4 、 electric discharge machining EDM1, roughing, the electrode loss is small2, high work removal rate3 can reduce the number of individual electrodes / can be made into a composite electrode4. No pollution to the environment in the electrolyte5, light weight, its density is less than 1/4 of copper6, excellent thermal stability, the electrode does not change7, the fine graphite electrode can be used to produce high quality workpiece surfaceDifferent grades of graphite materials can be used for processing different workpieces

Q:Graphite can be used in acid towers in chemical plants because of graphite

A graphite electrode coated with an antioxidant protective layer (graphite electrode, antioxidant). The utility model has the advantages of forming a protective layer capable of conducting electricity and resisting oxidation at high temperature, reducing electrode consumption (19%~50%) during steelmaking, prolonging the service life of electrodes (22%~60%), and reducing the electric energy consumption of electrodes.

Q:What do carbon products include?

High power electrode and ultra high power electrode. The carbon block can be divided into blast furnace carbon block, aluminum carbon block and electric furnace block. Carbon products can be divided into carbon products, graphite products, carbon fibers and graphite fibers according to the depth of processing. Carbon products can be divided into graphite products, carbon products, carbon fibers and special graphite products according to the raw materials and the production process. Carbon products according to their ash content, and can be divided into multi gray products and less ash products (including ash below l%).

Q:What is the striking electrode in the die making? Where is the technical point?

The electrode in die processing is edm.The discharge produces sparks and forms a "corrosion" to the other pole. The method of machining parts (dies) using this phenomenon is called edm.

Q:How about graphite electrode high-temperature oxidation resistant coating?

Can be used, temperature characteristics of nano composite ceramic coating is more stable, and nano composite ceramic nano high temperature oxidation resistant coatings of different graphite products according to the use conditions, can the temperature of 1600 degrees, forming a dense coating on graphite coated with rust, corrosion, high temperature resistance, oxidation resistance, wear resistance and other properties.

Q:Can high-purity graphite be used as an electrode?

The high purity graphite electrode has little wear and is suitable for increasing the machining of the cavity;

Q:Which department in the steel plant needs graphite in large quantities?

For steel and iron alloys, graphite electrodes are used, when powerful currents pass through electrodes into the melting zone of the electric furnace to produce an arcThe electric energy is converted into heat energy, and the temperature is increased to about 2000 degrees, so as to achieve the purpose of smelting or reaction. In addition, the electrolytic goldWhen the magnesium, aluminium and sodium are used, the anode of the electrolytic cell is also made of graphite electrode. The resistance furnace for carborundum is also made of graphite electrode as the burnerConductive material.

Q:The production of one ton of steel required graphite electrode

The consumption of graphite electrode in steelmaking in arc furnace, according to the different material, different specifications of graphite electrode used (normal power graphite electrode, high power graphite electrode, ultra high power graphite electrode) have relations.