Graphite Electrodes
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 Tons m.t.
- Supply Capability:
- 2500 Tons per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
- Model Number: Super High Power Graphite electrode
- Type: Electrode Block
- Application: used in EAF/LF for steel making
- Diameter: 250mm-800mm
- Length: 1200mm-2400mm
- Grade: SHP (Super High Power )
- Resistance (??.m): ?6.5
- Apparent Density (g/cm� ): ?1.64
- Thermal Expansion: ?1.5
- Flexural Strength (N/?): ?10
- Elastic Modulus: ?14
- Ash: ?0.3%
Specifications
1.Super High Power Graphite Electrode2.Dia:250-800mm,SHP dia450 available in stock
3 Tapered/Cylindrical Normal &Long nipple
Length : 1,200mm-2,400mm
Technical Specification SHP
Item |
Unit |
Nominal Diameter (mm) | ||
≤Φ400 |
≥Φ450 | |||
Resistance |
Electrode |
μΩ m |
≤6.2 |
≤6.5 |
Nipple |
≤4.5 |
≤4.5 | ||
Bending Strength |
Electrode |
Mpa |
≥10.5 |
≥10 |
Nipple |
≥18 |
≥18 | ||
Elastic Modulus |
Electrode |
Gpa |
≤14 |
≤14 |
Nipple |
≤18 |
≤18 | ||
Bulk Density |
Electrode |
g/cm3 |
≥1.65 |
≥1.64 |
Nipple |
≥1.75 |
≥1.75 | ||
C.T.E. |
Electrode |
10-6/°C |
≤1.5 ≤1.4 |
≤1.5 ≤1.4 |
Nipple | ||||
Ash |
Electrode |
% |
≤0.3 |
≤0.3 |
Allowable current load and current density (recommended) SHP
Dia. |
SHP | |||
Electric Arc Furnace |
Refining Furnace | |||
mm |
Current load A |
Current density A/cm2 |
Current load A |
Current density A/cm2 |
250 |
9000-14400 |
20-28 |
9200-15100 |
21-30 |
300 |
14000-20000 |
19-28 |
16000-23000 |
22-32 |
350 |
18000-26000 |
18-26 |
20500-30000 |
21-31 |
400 |
23000-33000 |
18-26 |
26000-38000 |
20-30 |
450 |
27000-42000 |
17-26 |
31000-48000 |
19-29 |
500 |
32000-50000 |
16-25 |
36500-51000 |
18-28 |
550 |
35000-55000 |
14-22 |
40000-63000 |
16-26 |
600 |
37000-60000 |
13-20 |
42500-70000 |
15-24 |
- Q:Why should graphite paper be placed between the heater and the graphite electrode?
- . Different single crystal furnace heaters may be of the same size or may be different. The heater is determined according to the size of the Czochralski single crystal furnace and the parameters of the drawn single crystal, and is generally designed in the form of a parallel circuit, and the following parameters. A heater, the heater, the shape of two inner diameters of three, four, the effective length of the heater heater, the heater piece is five thickness and gives the heater diameter. These parameters are determined according to Czochralski single-crystal furnace parameters and its crystal diameter. The power transformer parameters are mainly based on the single crystal furnace heating power: maximum output power, maximum output voltage and maximum output current, diameter and height of the crucible. The design of the heater has the following steps: 1. Selecting and determining the shape of the heater; the heater is made of high purity graphite; the resistivity of the high purity graphite; the heater is usually made into a cylinder at present.
- Q:After electrolysis of CuCl2 solution with graphite electrode for a period of time, we can observe that the graphite surface attached to the DC power supply is attached to the red material,And will the color of the solution be deep or shallow?
- Copper ions move toward the cathode, which is the graphite rod connected to the negative electrode of the DC power supply. The color of the solution becomes shallower
- Q:What is anodized graphite?
- Anodized graphite is mainly used for making brushes. The utility model has the advantages of good performance, high resistance coefficient and contact voltage, favorable for suppressing spark, and wide application range, and can be used for various types of motors and motors with more difficult commutation conditions.
- Q:What kind of asphalt is better for natural graphite coating?
- Graphite anode is mainly made of petroleum coke as raw material and coal pitch as binder. It is made by calcination, batching, kneading, pressing, roasting, impregnating, graphitization and machining. Conductive anode used for electrolysis equipment in electrochemical industry. Including: (1) anode plate for various chemical industries. (2) all kinds of anode rods.
- Q:How long is the graphite electrode machining cycle?
- The dust produced in the processing of graphite electrode is relatively large, the possible intrusion to the machine tool guide screw and spindle, which requires a corresponding machining device of graphite graphite dust machine, sealing better, because the graphite toxic.
- Q:Use of graphite in steelmaking
- Application of graphite electrode in smelting, alloy steel, iron alloy, graphite electrode, the strong current through the melting zone, the arc electrode into the electric furnace, the electrical energy into heat, the temperature rises to 2000 degrees Celsius, so as to achieve the purpose of melting or reaction.
- Q:Graphite electrode press device
- High power graphite electrodes. Graphite electrodes with a current density of 18 ~ 25A / cm 2 are allowed. They are mainly used in high power arc furnaces for steelmaking
- Q:Can high-purity graphite be used as an electrode?
- The thin and deep bone electrode can not be deformed, and the pure graphite electrode is brittle. It is better to break or deform, and can bear high temperature without deformation.
- Q:Electrolytic salt water why use iron as a cathode, all with graphite can not?
- From an economic point of view, the storage amount of iron is much larger than that of graphite, graphite iron is cheaper and easier to get.
- Q:The production of one ton of steel required graphite electrode
- Not sure, look at your such as what is charge, and your smelting level.If the proportion of molten iron to the furnace is high, then the electrode consumption is low, 0.7kg/t, or lower. If it's cold, 1-2kg/t.
1. Manufacturer Overview |
|
---|---|
Location | Liaoning,China (Mainland) |
Year Established | 2006 |
Annual Output Value | |
Main Markets | South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Northern Europe |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | DALIAN,QINGDAO,XINGANG |
Export Percentage | 61% - 70% |
No.of Employees in Trade Department | |
Language Spoken: | English, Chinese |
b)Factory Information | |
Factory Size: | 50,000-100,000 square meters |
No. of Production Lines | |
Contract Manufacturing | OEM Service Offered |
Product Price Range |
Send your message to us
Graphite Electrodes
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 Tons m.t.
- Supply Capability:
- 2500 Tons per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords