Omni Direction Self-Propelled Electric Scissor lifts-JCPT(OD)
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Intro:
It can not also go in any directions but also work in narrow space. With stable and reliable performance, this CE certified scissor lift aerial work platform is widely used in steel structure factories, and installing, measuring and maintaining aerial equipments.
Model | JCPT1013(OD) | JCPT1213(OD) | |
Rated capacity | kg | 450 | 400 |
Extend platform ratedcapacity | kg | 112 | |
Wind speed 45km/h | kg | 100 | |
Max working height | mm | 10000 | 12000 |
Max platform height | mm | 8000 | 10000 |
Overall length | mm | 2510 | |
Overall width | mm | 1300 | |
Overall height | mm | 2450 | |
Platform size | mm | 2500X1120 | |
Platform extend length | mm | 1270X1120 | |
Ground clearance | mm | 120 | |
Wheelbase | mm | 2030 | |
Turning radius | mm | 0 | |
Drive motor | 4x48VDC/2kw | ||
Lift motor | 48VDC/2kw | ||
Drive speed-stowed | km/h | 5 | |
Drive speed-raised | km/h | 1.1 | |
Raising/Falling speed | sec | 70/60 | 89/88 |
Battery | 8x6V/250Ah | ||
Charger | 48V/30A | ||
Gradeability-stowed | % | 20 | |
Max angle | 。 | 3 | |
Tyre | mm | 430 | |
NW | kg | 2500 | 2550 |
Standard Configuration
Can bus line intelligent controller
Proportional controller
Automatic pot hole protection system
Charge lamp
Working chronometer
Strut bar for safe overhaul
Transport standard forklift hole
Electric circuit fault code display
Low voltage alarm
Emergency descending button
Extended platform
Charge protection
Omni drive travel system
Horn
Tilt protection
Tilt alarm
Controller overtemperature protection
Driving motor overtemperature protection
High capacity traction battery
Overload limit
4x2 drive
Optional Configuration
AC power source connected to platform
Rotary strobe light
- Q:How is the small electric shearing fork lift designed
- Shear fork lift platform is mainly used in the logistics industry, production lines, lifting, loading and unloading goods to floor between basement, can also be used to lift stage, lifting work station, etc. The product has a stable structure, low failure rate, reliable operation, safe and efficient and easy to maintain. The fixed platform shall be equipped with the requirements of use, and the attached devices shall be configured for any combination such as the safety protection device of the platform. Electrical control mode; Work platform form; Dynamic form; Walking actuators and so on. The correct choice of all kinds of configuration, the function of the lifting platform can be maximized, the best use effect is obtained.
- Q:How much is the construction elevator equipment
- The principle is different, the construction elevator operates in the litter box. The elevators are short for construction elevators, which are very high in the safety and performance of large facilities that can be used on the site. The construction elevator should be a dual-use lifting device. Type 1, imobile elevator construction lifter is a kind of lifting good stability, wide range of goods lifting equipment is mainly used for production assembly line height difference between the transport of goods; The material is up and down. Adjust the height of the workpiece when the workpiece is assembled; Top feeder: Lifting up parts when large equipment is assembled; Material on large machine tools; The warehousing and loading and unloading facilities shall be equipped with the loading and unloading of goods such as forklift truck. Depending on the requirements, the attached device can be configured to carry out any combination such as a secure protection device for a stationary elevator. Electrical control mode; Work platform form; Dynamic form, etc. The correct choice of various configurations can maximize the function of the elevator and achieve the best use effect.
- Q:Does the shear fork lift stand belong to special equipment?
- It belongs to special equipment, the manufacturer must have special equipment production qualification "special equipment manufacturing license" to be able to produce the sale shear fork lift machine. The products of the manufacturer without relevant documents are not eligible.
- Q:The characteristic of shear fork platform
- The fixed platform shall be equipped with the requirements of use, and the attached devices shall be configured for any combination such as the safety protection device of the platform.
- Q:How does the platform maintain
- Inspect hydraulic oil and oil level. The hydraulic oil should be 40 to 50 mm above the tank when the platform rises to the highest. When the oil is dark, the oil is sticky, or the oil has grit and other foreign things, the hydraulic oil should be replaced in time. The hydraulic system of lift platform applies 32 # hydraulic oil. A. check the hydraulic and pipe joints. The pipe is damaged and should be replaced immediately. Tighten the joint when the connection is loose.
- Q:The home is decorated, make a tatami mat the platform should pay attention to what aspect?
- The second is to notice whether the product has a secure clamping system. Most of the products on the market are mechanical clamping system, which is low in safety, and the system is too resistant to it. Best choice is the electronic control system, because it will through the electronic system induction to the resistance changes, more than a certain value will stall, electric and automatic recovery (electronic resistance setting values are very sensitive, high security), such as task of children. The third is, of course, the manufacturer and the brand, the good manufacturer and the brand make the product more reliable, which is not to be said in detail.
- Q:There are different kinds of milling machine and vertical lifting machine milling machine
- Start by figuring out the difference between vertical and horizontal The main shaft of vertical milling machine is perpendicular to the workbench, and the spindle of horizontal milling machine is parallel to the workbench. The knife of vertical milling machine is relatively flexible, the scope is wider. Can use vertical milling cutter, machine clip, bit etc. Milling keyway, milling plane, boring hole, etc.
- Q:How to use the elevator to be safer and more efficient
- Annual maintenance Check all hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. Remove the hydraulic oil, remove the oil strainer and remove the oil strainer, clean it up and then put it back in the tank. Be familiar with 'ten notices' 1, pay attention to the agencies should regularly check and adjust the brake of the brake and the clearance between the brake wheel, flexible and reliable. The clean surface, there should be no dirt, in case of dirt must wash with gasoline or thinners. 2, pay attention to removing the hydraulic tank of fuel cap, remove the cap around earth, unscrew the cap, remove residual impurities in the joint area (not rinse in order to avoid water seeping into the tank), confirmed to open the cap. 3, pay attention to the elevator remove the hydraulic tank of fuel cap, filter cover, test hole, hydraulic tubing parts, cause the system oil when exposed to avoid dust, remove the parts to open completely clear before first.
- Q:What happened to the rise and fall
- The first possible reason is that the voltage is too low to check the actuator potential of the motor load. For users, a huge lift seems very mysterious, from which a small parts out of the question can let you helpless, Beijing force high lifting mechanical wang manager here to give you a little small pupil:
- Q:Safety operation of hydraulic platform
- Don't overload your operations; Try to be as special as possible; Try to troubleshoot the professionals if possible. In conclusion, the operation of strict accordance with the operating procedures provided by the manufacturer is the main body of the security guarantee
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Omni Direction Self-Propelled Electric Scissor lifts-JCPT(OD)
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords