Injection molding machine LOG-110S8 QS Certification
- Ref Price:
-
$14,907.00 - 19,049.00
/ unit
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Quick Details
| Condition: | New | Type: | Tube Head Injection | Style: | Horizontal |
| Brand Name: | LOG | Model Number: | LOG 110S8 | Place of Origin: | Zhejiang, China (Mainland) |
| Plastic Type: | Thermoplastic | Automatic: | Yes | Injection Weight: | 175 |
| Clamping Force: | 1100kn | Opening Stroke: | 350mm | Power(W): | 12kw |
| Certification: | CE | After-sales Service Provided: | Engineers available to service machinery overseas |
Packaging & Delivery
| Packaging Details: | 20GP,40GP,40HQ |
| Delivery Detail: | 30 Days |
Product performance and advantages:
1. Servo energy-saving system
Using the servo motor oil electricity composite structure
2. Servo motor high response feature
It costs only 0.05s for servo energy saving injection molding machines to achieve the maximum output, in
comparison with conventional hydraulic injection molding machines. The response speed has been obviously
increased, improving the production efficiency.
3. Unique function
Large colored screen with TFT interface
Full automatic close-loop control
Module design of hardware
Auto-tune PID temperature control
Pc interface USB, PIC, and FLASH…
Curve monitoring and analysis function
K-can data transmission (500Kbit/s)
On-line central monitoring function
LOG-110S8 Technical parameters
Description | Unit | LOG-110S8 | ||
international recognized models | 370/110 | |||
injection | A | B | C | |
Tjeoretical injection volume | cm³ | 163 | 192 | 235 |
Shot volume | g | 148 | 175 | 213 |
Oz | 5.2 | 6.2 | 7.5 | |
Screw diameter | mm | 35 | 38 | 42 |
Injection diameter | mpa | 228 | 193 | 158 |
Screw L:D ratio | 21.7:1 | 20:1 | 18:1 | |
Scerw steoke | mm | 170 | ||
Screw rotate speed | r/min | 0-180 | ||
CLAMPING UNIT | ||||
Clamping force | kN | 1100 | ||
Opening stroke | mm | 350 | ||
Platen size | mm*mm | 600*550 | ||
Space between tie bars | mm*mm | 405*370 | ||
Maldthickness | mm | 150*380 | ||
Platen Mix stroke | mm | 730 | ||
Ejection stroke | mm | 100 | ||
Ejcetion force | kN | 42 | ||
Power/Elcetric Heating | ||||
Hydralic system pressure | Mpa | 17.5 | ||
Pump motor | kw | 12 | ||
Heating power | kw | 7.5 | ||
Number of temp.conteol | 4+nozzle | |||
Other | ||||
Cycle time | sec | 1.3 | ||
Tank volume | L | 200 | ||
Machine dimesions | m*m*m | 4.3*1.2*1.8 | ||
Weight of machine | kg | 3600 | ||
- Q:How many tons is the injection machine of 12 Ann?
- A, an abbreviation for ounce, is a unit used by the Hongkong industry to distinguish between injection molding machines. In this way, in the domestic commonly known as "T" (ton), "12" equivalent to "160T", the screw diameter of about 32 mm.
- Q:when the material stored, the screw has been in situ, and will not go back to the set stop position. What shall I do?
- There are several situations may lead screw rebate: 1, no material or hopper outlet plug; 2, the back pressure is too large, resulting in melt coming from the nozzle; 3, material additives or mineral oil too much, causing the screw slipping; 4, the screw is not smooth, with melt wrap screw, cannot be dissolved in your current temperature; 5, machine maintenance, reverse screw; and I hope to help you.
- Q:What's the meaning of the connection between the injection machine and the manipulator?
- 1, 2, 3 power supply4, 5 is the contact output signal (allowing opening), should be connected to the mold valve6, 7 is the contact output signal (allowing die closing), it should be connected to the valve in series8, 9 is the contact output signal (allowing the ejector die), should be connected to the ejector valve10, 11 is the injection machine to return the signal, tells the manipulator to open the mold to complete13, 14 is the injection machine return signal, tell the robot safety door closed15, 16 is the contact output signal, and the recirculation beginsAccording to the actual circuit of the injection molding machine to analyze how to connect the line,
- Q:Name of China's top ten famous brand injection molding machines
- Haitian, Donghua, Huada, Iraq and so on, many, many.
- Q:Notice of injection moulding machine
- Injection molding machine temperature rise is too high, five major hazards: the machine produces thermal deformation, oil viscosity decreases, rubber seals deformation, accelerate oil oxidation deterioration, but also make the air component pressure reduction.One of the hazards: causes the machine to produce thermal deformationIn the hydraulic component, the moving parts with different thermal expansion coefficients are jammed because of the small clearance between them, which results in malfunction and influences the drive accuracy of the hydraulic system, resulting in the poor quality of the parts.Hazard two: reduce the viscosity of the oilThe high temperature rise of the injection molding machine will lead to lower viscosity of the oil and leakage increase. The volume efficiency of the pump and the efficiency of the whole system will be significantly reduced. As the viscosity of the oil decreases, the oil film of the moving parts, such as the slide valve, is thinned and cut, and the frictional resistance increases, leading to increased wear.Hazard three: deform rubber sealsThe temperature rise of the injection molding machine is too high, it will deform the rubber seal, accelerate the aging failure, reduce the sealing performance and service life, and cause leakage.Four of the hazards: to accelerate the oxidation of oilThe temperature rise of the injection molding machine is too high, it will accelerate the oxidation of the oil, precipitate the asphalt material, and reduce the service life of the hydraulic oil. The precipitate blocks the damping orifice and the slit valve opening, causing the pressure valve to stop and cannot move, and the metal pipe lengthens and bends, and even breaks.
- Q:Injection molding machine barrel temperature is not very high at normal and low temperature line is very tight no problem
- Or the temperature line problems, sometimes without induction to the actual temperature will appear this phenomenon. Try a few more
- Q:What is a vertical injection molding machine?
- Vertical injection molding machine:1 、 vertical non column lock mold, horizontal injection molding, mold three sides open, more convenient and safe operation.2 、 injection pressure, torque hydraulic motor control, large spiral torque, high pre plastic, the system pressure by the proportional valve control.3, multi section pressure output, pressure sensitive, accurate and accurate.4 、 can install single, double slide, turntable system to improve production efficiency.5, suitable for the production of large doses of brain glue.
- Q:Why is the power of the motor different?1. the same 90T why some motor power 8.5KW, some 11KW, and some 15KW?.2. why are there so many power points? Is it possible to produce the same product with 8.5KW? Is it okay to use 11KW?3. what's the difference between 8.5KW and 11KW? Isn't the power of the bottom more power saving? Or is the power clamping force less than 900KN?4. if the 8.5KW clamping force also has 900KN, then the 11KW clamping force is also 900KN, is that the way it is understood? So 11KW isn't a waste of electricity?Give high marks to adopters!!!
- Small screw, injection pressure will be much larger, such as a bar to let you plug in the wood, may be more difficult, if you use a needle in the wood is much easier, the small screw is suitable for precise, thin-walled products, is the need to install the nitrogen injection really do thin-walled products or hydraulic machine. All electric injection molding machine, if you just the production of ordinary products, injection molding machine is basically on the market can meet (limited to hundreds of tons of clamping force of the machine), a large Haitian machine is a good choice
- Q:Injection molding machine maintenance Daquan books catalog
- The third chapter is the mechanical drive system of injection molding machineSection 1 Structure of injection moulding machineI. outline structure of injection molding machineTwo 、 mould locking device of injection molding machineThree. Injection device of injection molding machineThe second section is the assembly relation of the mechanical deviceMould clamping deviceTwo. Dispensing unitThird disassembly and installation of mechanical devicesFirst, the dismantling steps of the die locking deviceTwo. The dismantling step of the spraying deviceFourth, mechanical transmission system maintenanceI. common failures and treatment of mechanical transmission systemTwo. Components and inspection of mechanical drive systemThe fourth chapter is the hydraulic transmission system of injection molding machineSection 1 hydraulic oil pumpSecond section hydraulic cylinder and hydraulic motorThird section hydraulic control valvePressure control valveTwo 、 flow control valveThree 、 direction control valveFour, proportional valveFive. Cartridge valvesFourth section auxiliary deviceDisassembly and overhaul of fifth hydraulic system componentsI. disassembly and inspection of the oil pumpTwo 、 seal and repair of cylinderThree, oil valve repairSixth section hydraulic transmission system common breakdown and processing
- Q:How to debug the injection molding machine? solve
- This is not to say the machine belongs to the high current working machine but also large machine should have a master in their own training proficient is best not to touch.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Injection molding machine LOG-110S8 QS Certification
- Ref Price:
-
$14,907.00 - 19,049.00
/ unit
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
