Geomembrane Pond Liner
Geomembrane Pond Liner Related Searches
Geomembrane Pond Liner Supplier & Manufacturer from China
Okorder.com is a professional Geomembrane Pond Liner supplier & manufacturer, offers integrated one-stop services including real-time quoting and online cargo tracking. We are funded by CNBM Group, a Fortune 500 enterprise and the largest Geomembrane Pond Liner firm in China.
The geotechnical membrane technology of urban construction?
- The welding construction must be synchronized with the geomembrane one after another. The slope geomembrane is laied from up to down in a whole and cannot be splited joint. The upper left shoulder slope and anchorage capacity, and the lower end to the bottom of the pit left head slope root distance of not less than 1.8m, membrane end alignment with hot wedge welder connection. The slope shoulder is welded with extrusion welding. The seam should try to avoid the corner groove in the corner, and try to minimize the irregular shape. If it can not avoid the corner ditch, you must use a squeeze welding machine welding seam. In the crossed welded seams, it must be used to weld the welding machine welding. The length of welding shall not less than 20cm. Before welding, the welding seam should be trimmed to the exposed welding seam, and then the welding machine can be used to fill up the welding machine with the hand wheel.s
The pool of the soil, the loss and the number of lap
- Lap 15 cm or so, more than 10% losss
What is the installation technology of soft membrane?
- When installing the soft membrane, the first is to install the four angles of A, B, C, D, then the diagonal pull point installation, finally all installation. The installation sequence: 1. Before the entering of the soft film smallpox, the site must be electrified and without construction waste. 2. The deal with the bottom of the piamater ceiling should be fit for the installation conditions, such as the installation of the steel and so on; it must be cleaned. 3. All the installation of the lights must be according to the requirement of us. We should ensure all of the circuit to be electrified. If there are any lamp not lighting up before installing the soft film, it should be adjusted and repaced in time. The interior hidden lights should be painted with white paints so as to get a better effect. 4. The air conditioning and fire pipes must be arranged in advance and debug to keep it operating well. After the installation of the air inlet, spray head, and smoke sensor, all of them should meet the requirements of us. 5. After the installation of the piamater ceiling is completed, for example, the paint should repair the gypsum board and should not touch the soft film smallpox.s
How to remove the protective film of the guard against theft?
- There are many methods: 1: The area is not large and you can use banana water to soak it and then clean it with a cleaning ball. 2: It can be removed with cleaning agents (bottled called A1) used in the textile industry.I have tried. It is very good. 3: To add some sulfuric acid into the water, otherwise it will be corroded and then rub with the cleaning ball. 4: To heat it with the electric hair drier, or with a wooden shovel, plastic marks can be used to wipe off the solvent oils
How about the warm reflective film?
- The advantage of warm reflective film special for floor heating No.1: it is healthy and environmental friendly.
The advantage of floor heating No.2: it is comfortable and fit.
The advantage of floor heating No.3: it is of good heat stability.
The advantage of floor heating No.4: it is low cost.
The advantage of warm reflective film special for floor heating No.5: it wouldn't occupy the usable area.
The advantage of floor heating No.6 it wouldn't make noise.
The advantage of floor heating No.7: the temperature can be controled.
The advantage of floor heating No. 8: it has long service life.s
How to stick the camera film?
- Camera film paste: 1, First make sure your screen and screen protector film is smooth, sometimes when mirror got stained with dirt, it will drum up small bubbles; 2 use a little water (oil is also ok, as long as it is dust-free) , to wipe evenly on the film screen (not too much, just a little bit is enough, spilled water or oil is forbidden; 3 then carefully put an end of screen protector film gently affixed at one end of screen, pay attention to push air out (but in general, air bubbles can be avoided in the first place);s
Imported HDPE geomembrane application engineering and imported impermeable membrane .
- Landfill; digesters coverage.s
What kind of welding machine is used for geomembrane welding burnout?
what is basalt rock
- What is basalt rock？Basalt belongs to basic volcanic rocks. It is the main component of the earth and the moon sea ocean crust, the earth crust is an important substance and luna...
Have you ever used aluminium composite material
- Aluminium composite material are usually used at automobile industry,Optical equipment industry, but also at sports products industry that offer danymic in this field. Have you eve...
what is the difference between granite and marble
- Granite and marble are commone stone in our daily life, whether it is luster or texture,they are rare good stone.But what is the difference between granite and marble？Let me take...
how to fix door closer
- The new door closer is in use for a week to 10 days，you should check all the screws, and retighten again. Please use the hydraulic oil recommended by the manufacturer.For cold ar...
Have you done your business with aluminium composite panel manufacturers
- Aluminium composite panel are usually used at building construction, houses, but also at some factories in this field. Have you ever heard of aluminium composite panel?Features of ...