Bushels To Pounds

Hot Products

Slotted Galvanized Corrosion Resistance c profile steel c channel steel dimensions channel

Galvanized steel profiles U/C channel for drywall

Stud profile ceiling metal furring channel for Drywall

Cold formed Profile Steel Drywall for ceiling structure

Steel Profile-Drywall Grid System for Partition

Galvanized stud for gypsum drywall metal stud and track

Cold Rolled Steel Galvanized Profiles Drywall C Channel steel sizes

Gypsum Board Steel Frame or Keel Light Keel

Drywall Profile-Stud for Partition System

Steel Construction Profile Keel Good Quality Galvanized

FAQ

How to construct double - sided double gypsum board partition wall

Installation of vertical keel, light steel vertical keel. Keel must be vertical, vertical keel inserted at both ends along the top keel and along the keel, adjust the vertical and positioning accuracy, with a core pulling rivets fixed.

How to fix the middle of the light steel keel to the roof and the ground, the keel has a joint?

First with the expansion bolts fixed heaven and earth keel and roof and the ground, the middle with a vertical keel; if the layer is too high, then the keel will have joints, of course, have special connections.

Home improvement in the partition

Light steel keel, wood keel wall: light steel keel is a substitute for wood keel products, fire effect is significant (when using wood keel to brush fire retardant coating). As a partition wall of the external use of the plate there are gypsum board, Ed panels and aluminum-plastic panels, according to the actual requirements. If you want to do noise effects, in the middle of the installation of rock wool or mineral wool sound-absorbing panels;

To warm the above has been tiled, with light steel keel to build a wall, how to fix the keel?

With C-beam or two angle steel, LI put two and wall fixed, the keel fixed to the LI. Do not be able to drill on the ground.

What is the difference between gypsum board partitions and lightweight partitions?

Functional distinction, light partition is mainly used to replace the brick and the larger compartment, play a fire insulation and insulation and other effects, and gypsum board partition, mainly the role of partition, thermal insulation effect Relatively poor, so between the two plates to be filled, such as rock wool, sound insulation cotton and so on. In short the two products are different, to see where, to achieve the main effect is what.

Is it possible to use a hollow brick or a 95 brick?

With hollow bricks, because it is relatively light, will not cause the floor cracking. In fact, there are many other wall materials, including light steel keel gypsum board, steel mesh, etc., both light, but also save the space as usual when you decorate the brick wall should be used 1/2 brick wall, if the hollow brick Do, the wall width of the brush with 120 thick, the main advantage is the weight of light is generally 95 brick wall 2/3, will not bring too much burden on the structure of the house itself, noise effects can be, because the hollow brick inside Hole in the arrangements on the noise function to consider, relatively speaking, 95 brick wall thickness and hollow brick is the same, heavy weight, sound insulation effect than the hollow brick to slightly better. But I suggest that the main building brick wall, then the best use of steam concrete blocks, to achieve the best results!

Light steel keel gypsum board wall height is how to determine

According to the British standard BS5234, different use of the partition wall has different stiffness requirements, the maximum height of the partition wall to determine the criteria for a certain surface load W conditions, the wall of the maximum deflection y does not exceed L / 240; The maximum deformation can not be greater than the L / 240 well system under the 200Pa uniform load. The wind load is superimposed and the uniform load will become larger

Has installed a wooden floor, you can do in the above light steel keel wall?

My advice is not to do on wooden flooring Because the wood floor is flexible. The The It is best to finish the wall, and then restore the floor Just personal opinion for reference only