UWTV-1000 well Scanning UnderwaterImaging camera System
· Placeof Origin: Shaanxi, China (Mainland)
· BrandName: Granfoo
· ModelNumber: UWTV-1000
· Type:Digital Camera ,Video Camera
· Style:Bullet Camera
· SpecialFeatures: Waterproof / Weatherproof
· Imagesensor: 1/3 SONY CCD
· Workingdepth: within 3000m
· Angle:180degree( vertical)
· Power:AC110V 60HZ AC220V
· Framerate: 25frame/second
· lightsource: 4 LED light
Main function :
The hemisphericalintermittent monitoring
The alarm monitoringsystem for suspicious objects
The navigation buoysvideo observation and positioning
The surface andunderwater monitoring of aquaculture
The monitoring ofimportant parts of the ship, submarine
Main technical index:
CCD Image Sensor
1/3 SONY CCD
Dedicated underwater camera ， Underwater FOV 40 o
1.7lux or LED source
Special water, oil sealing integrated cable interface
-20 o — 70o
Fixed installation with flange
316Lstainless steel，Acrylic glass（PMMA）；
- Q:Monitor inside the infrared network camera infrared light automatically switch and synchronous switch What does this mean?
- Synchronous switch has not heard, another set according to set the time to switch. For example, set 18 points to night into black and white
- Q:Monitor the camera why the black screen?
- First, check the power supply under the surveillance camera is a problem, if it is infrared surveillance cameras, can see the red light at night, then that power supply normal; if not, you can use a multimeter on the power supply and power lines to measure.
- Q:How do I use the surveillance camera to do live?
- Dahua and Haikang's webcams can be added directly to their app for sharing. Can share to friends circle microblogging what. Other manufacturers get less but also should line.
- Q:Do you want to monitor the camera?
- Weak point of delivery is to talk about the power adapter in the 220v voltage this head, the transmission line is 12v voltage, suitable for closer from the video camera camera.
- Q:Ask the professional to answer, monitor the camera with water ripples
- The most common symptom in video transmission is the presence of a black bar or a white bar on the monitor's screen and scrolling up or downwards. Therefore, in the analysis of such failure phenomenon, to distinguish between the two different causes of failure.
- Q:What is the difference between a dome camera, a gun camera and a dome camera in security monitoring?
- Ball with the above two biggest difference is that the ball can control the keyboard to control, generally installed in the need to monitor the relatively large range of the hall, outdoor large area. General bolt and hemisphere price almost. Cheaper on the hundreds of pieces, good also two or three thousand. But the ball will be very expensive, made in the thousands of good brands will reach two or three million.
- Q:Monitor the hard disk video recorder how to pick up the computer
- WAN: If your video recorder and the computer to see the image is not in a place, their network cable can not be inserted under the same router, then we must browse through the WAN. The basic operation is almost, but if you are the average family of the Internet, then to apply for domain names, do mapping on the router.
- Q:What is the minimum illuminance indicator of the surveillance camera?
- IRE Level: The maximum amplitude of the video output of the CCD camera is generally set at 100IRE (or 700 mV), and a 100IRE video indicates that you can fully drive a monitor to show the best brightness and contrast image quality. 50IRE video shows only half the contrast, 30IRE (or 210 millivolts) that only 30% of the original amplitude, usually 30IRE is the lowest performance available image value. So there is no indication of the lowest illuminance results of the IRE grade and are not actually comparable. Finally, it is the camera's special function settings.
- Q:Dvr monitor the video recorder without image output is what the problem
- If the format is only the system disk, then the system, monitoring software must be reloaded, set; VCR is the embedded host, format only to clear the video data, the system program and settings are stored in the motherboard chip So there is no need to reset it.
- Q:Monitor host can not find the camera ip how to do?
- Please make sure that the equipment is working properly (power supply is normal).
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range