Q:What's the metal hose for fire fighting?

1 the metal hose is made of 1Cr18Ni9Ti stainless steel, and has strong corrosion resistance.The 2. hose tube is made of thin wall stainless steel tube. It has strong flexibility, flexibility, strong bending and vibration resistance, and reinforced protection of woven mesh sleeve, so that it has higher bearing capacity.The connection of the ends of the 3. flexible pipes can be made into other connecting ways except the thread and the flange standard, so that the connection and the use are convenient.4. the product is not only suitable for mating with rotating joint, but also widely used in soft connection of many kinds of fluid medium transportation.

Q:What are the matters that should be paid attention to when installing rubber hose joint in water pump?

Installation notes:?1, Shanghai rubber pipe joint non super displacement limit at the time of installation;?, 2 installation bolts to be symmetric, gradually tightening pressure, to prevent local leakage;?3, flat, suspended, vertical installation of rubber pipe joint, actual axial displacement pressure rubber tube joints should be smaller than the pipe support, otherwise should install anti pull off device to prevent work pressure;?4, rubber pipe joints should be away from heat, ozone, no strong radiation light. Exposure and use of media that do not meet the requirements of the product;?5, rubber pipe joint in the transportation, loading and unloading, installation, no sharp instruments across the surface of the sealing surface;

Q:What kind of material is medical rubber tube?

PVC, silicone tubes and other medical grade!

Q:How can the rubber tube be used properly and how to use it properly?

The hose burst caused by frequent and severe pressure impact. This situation is not generally under the static pressure caused by too much, but the number and intensity and pressure impact. Engineering machinery in operation, will be repeated in the hydraulic tubing suddenly increased or decreased, which impact on the oil pressure of frequent the damage of the oil seal, resulting in increased, loosening hose leakage and rupture foaming and pipe joint. Therefore, in operation, the valve stem can not be too hard, must be gentle.

Q:What is the function between the rubber pipe joint and the installing pipe?

The inner seamless seamless rubber joint prevents the corrosive medium from eroding the inner wall of the rubber joint and improves the service life in the high temperature resistant, acid resistant and oil resistant pipes.

Q:Is the metal hose the same as the soft connection?

Some places are a term, but there are also soft connections, non-metallic soft connections, metal soft connections, so it's better to ask what you want

Q:What's the difference between hose and hose for compressed air?

Generally, they are bundled into difficult to buy, no need to stand upright, probably because I have not seen large caliber. I also think this thing has absolutely nothing to stand up to. You say the hard one is probably covered with rubber and steel ring inside. Generally used to connect peripherals and larger gas equipment. The hoses we call are generally not very rigid. It breaks easily because it is too hard. Use often put hose made of spring shape, prevent the discount of breath

Q:Stainless steel metal hose and flexible rubber joint which is easy to use?

The pressure and temperature bearing capacity of the stainless steel metal hose shall be due to the rubber joint, and the length of the product can be customized according to the requirements of the field, and the form of the joint is very rich.

Q:My company does high-quality rubber tube, all of the core method, and why use EPDM to do the inner tube, it is difficult to take off the core, please point out! What's the reason?

The core needs to be removed, and if it is too long, the mandrel can be divided into two sections and separated from the 2 sides

Q:Flexible rubber joints. What do they mean by flexing?

In this respect, there are two kinds of materials (or structures): 1) stainless steel, a section of corrugated pipe; 2) made of rubber, that is, when a section of rubber cylinder. There are 2 kinds of parameters, such as diameter, pressure and linking method.