Self-propelled aerial working platform PST230
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
| Model | PST230 | |
| Working height | m | 22.5 |
| Platform height | m | 20.5 |
| Platform capacity | kg | 200 |
| Platform dimensions（L*W*H） | m | 1.2×0.8×1.1 |
| Working radius （capacity 200kg） | m | 9.7 |
| Working radius（capacity 80kg) | m | 11.3 |
| Cage rotation angle | 180° | |
| Forearm rotation angle | 180° | |
| Rotation angle | 450° | |
| Length | m | 6.1 |
| Width | m | 1.49 |
| Height | m | 1.98 |
| NW | kg | 2900 |
| Outrigger size | m | 4.19 |
| Gradient ability | 30% | |
| Working gradient | 17% | |
| Pressure on earth(working) | Kn/㎡ | 1.39 |
| Pressure on earth(traveling) | Kn/㎡ | 2.2 |
| Max travel speed | km/h | 1.5 |
| Range of wireless remote control | m | option |
| Motor | Diesel+220V |
1.delicate shape, Rubber track has little pressure on earth, it can travel on any ground,
eg.marble floor
2. The height and width of track is adjustable, it can travel on any unevenness road.(option)
3.pivot turn; big arm and forearm are retractable
4.hydraulic outrigger can control separately, self-level(option)
5.advanced alarm system protect machine work in the stable situation
6.avoid obstacle, work in the narrow place or gradient road
7.cage can tilt 180 degrees
8.Small when it retracts，nimble,the height of stowed situation is 1.98m
9.100M wireless remote control(option)
10.Cage can start or shut the machine
11.three types of working mode: self-propelled,truck-type and pull-type
12. emergency stop device and overloadd protection
13. state indication,alarm and limitation
14.walk,main arm lift, main arm stretch,rotating floor tilt;working arm lift has function of buffer delay,
protecting against shock
15.Emengency operating system
16.advanced torque control
17.special type high strength material
18.The height and width of track is adjustable, it can travel on any unevenness road
19.double computer control,find mistake itself, LCD shows fault code(below 26m )
20.FUZZY control technology,precisely move(below 26m)
21.concentric stretch technology
22.Power hydraulic proportion control
23.All cylinders have hydraulic locks, safe even if the cylinder is broken
24.Emengency descending system
- Q:What kinds of tables are there? Which is better for the office?
- In the office, see if you're new or in the office. New outfit can consider electric elevator table, common card position can buy lift platform. It is recommended that they have a variety of elevating products, including elevating tables and elevating tables.
- Q:What certificate is required to operate hydraulic platform
- Need special equipment to use the license, do this card is very expensive, seem to want 500 ~ 10000. Where did you buy it, because the house can do it for you? If the product does not meet technical review do not water,,,, I know there is a producers can do STH for sb, HuaNanJun industry machinery equipment co., LTD, special equipment to check more strictly, now,
- Q:Where do the elevator motors go?
- The earliest elevating equipment appeared in ancient China and Europe, a kind of "windlass" that was used to transport people and goods vertically. In modern times, we use a wooden ladder for lifting goods, which is inconvenient and dangerous to climb. On March 23, 1857, a fifth floor store in New York City installed the first passenger lift with the Otis safety device. The first lift was powered by a steam engine, so the building must have a boiler room. In 1880, the German company Siemens invented the electric lift, and since then, the use of elevators has been widely accepted and developed rapidly. Domestic production The electric lift machine, the product model is different, the upgrade height is 4 meters, 6 meters, 18 meters. Adopt foreign hydraulic, pump station system, hydraulic system explosion-proof device and hydraulic self-locking device. It has the advantages of novel design, reasonable structure, lifting and balance, simple operation, convenient maintenance and other products. Widely used in plant maintenance, industrial installation, equipment maintenance management, warehouse, aviation, airports, ports, railway stations, mechanical, chemical, pharmaceutical, electronics, electric power and other high-altitude equipment installation and maintenance.
- Q:What should the chain's main elevator be aware of when installing the chain
- The rail link elevator usually requires a design pit. For equipment and the ground level factors, design should be carried out in accordance with the actual demand design pit size, at the same time when the production equipment shall be carried out in strict accordance with the size of the pit production.
- Q:How to maintain the platform?
- Remove the hydraulic oil and remove the oil strainer, remove the oil strainer, clean it up, and then put it back in the tank and connect the pipe. (put on new oil and don't use the old oil. Otherwise, the moving parts of the hydraulic lift system will accelerate the wear and tear.) Remove and disconnect the lift valve, blow the plunger down with compressed air, then load and resettle. Check all hydraulic pipes and connectors. The pipe should not be broken, the joints should not be loose, and all the joints must be tightened.
- Q:The single fork hydraulic lift platform
- Did this problem simple, 1 is installed support valve, 2 if supported hair that is inside the valve body is dirty, 3 is the relief valve to have stuck inside, 4 support electromagnetic valve core have stuck inside, taixing new energy of hydraulic machinery factory
- Q:How to use the elevator to be safer and more efficient
- Constantly check the operation of the various agencies is normal, have no noise, if find fault, the elevator must be eliminated in time. 2, check the connection of the ministries, such as loose should be tight. When the compression of the connecting bolts should be in body check firmness, slightly shaft must have a split pin all connections, and to open fully. Always check all electrical wires and cables for damage. Make sure to cover and replace damaged parts in time. When the motor is overheat, stop the engine in time, and then keep running after the failure. The motor bearing lubrication is good.
- Q:How does the elevator repair
- For elevator maintenance the simplest way is to find the manufacturer directly to repair, after all, is their production, repair is good, also save time, our factory is the jinan day machinery, bought two or three years, rarely out of order, maintenance in time, high efficiency, under the baidu search them, you ask yourself, see how.
- Q:Safety operation of hydraulic platform
- Purpose: this procedure is used to guide operators to operate correctly and use hydraulic platform equipment. Two procedures: 1, the parts should be inspected carefully before they are work lifting platform, key check whether the screw connection is reliable, hydraulic pipe leaks, loose wires contact with and without, breakage, and so on and so forth. 2, lifting platform lift, put the leg in the four corners, four leg should be firmly supported on solid ground, dispatch work mesa to state level (visual). Turn on the power, the indicator should be on. Then start the motor, pump work, drop one or two in the air, check the parts and then start working again. When the temperature is below 10 ℃, should make the pump running 3-5 minutes, confirmation of oil pump work can be carried out. 3, homework personnel enter the platform after the guardrail doors should be closed, with bolt, tied on safety rope, the center of the load (people stand location) should be in the center position of workbench face.
- Q:How to automatically lift up and lift
- If I want to reach a certain time, the platform automatically drops, how to achieve? There is a time relay. Thank you very much!
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Self-propelled aerial working platform PST230
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
