Self-propelled aerial working platform PSS400AX
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
| Model | PSS400AX | |
| Working height | m | 39.5 |
| 36.5 | ||
| Platform height | m | 37.5 |
| 34.5 | ||
| Platform capacity | kg | 400 |
| Platform dimensions （L*W*H） | m | 1.5×0. 8×1.1 |
| Working radius m | m | Working radius （capacity 200kg）16m |
| Working radius （capacity 400kg）13m | ||
| Cage rotation angle | ∑ | 180∑ |
| Angle of rotation | ∑ | 450∑ |
| Length | m | 8.2 |
| Width | m | 1.58 |
| Height | m | 1.98 |
| NW | kg | 11700 |
| Outrigger size | m | 5.01 |
| Gradient ability | 30% | |
| Working gradient | 30% | |
| Pressure on earth(working) | Kn/m | 4 |
| Pressure on earth(traveling) | Kn/m | 4.8 |
| Max travel speed | Kn/m | 1.6 |
| Range of wireless remote control | m | 100 |
| Motor | Diesel 380V |
1.delicate shape, Rubber track has little pressure on earth, it can travel on any ground, eg.marble floor
2. The height and width of track is adjustable, it can travel on any unevenness road.(option)
3.pivot turn; big arm and forearm are retractable
4.hydraulic outrigger can control separately, self-level(option)
5.advanced alarm system protect machine work in the stable situation
6.avoid obstacle, work in the narrow place or gradient road
7.cage can tilt 180 degrees
8.Small when it retracts，nimble,the height of stowed situation is 1.98m
9.100M wireless remote control(option)
10.Cage can start or shut the machine
11.three types of working mode: self-propelled,truck-type and pull-type
12. emergency stop device and overloadd protection
13. state indication,alarm and limitation
14.walk,main arm lift, main arm stretch,rotating floor tilt;working arm lift has function of buffer delay, protecting against shock
15.Emengency operating system
16.advanced torque control
17.special type high strength material
18.The height and width of track is adjustable, it can travel on any unevenness road
19.double computer control,find mistake itself, LCD shows fault code(below 26m )
20.FUZZY control technology,precisely move(below 26m)
21.concentric stretch technology
22.Power hydraulic proportion control
23.All cylinders have hydraulic locks, safe even if the cylinder is broken
24.Emengency descending system
- Q: What about the heat treatment of the lifting platform?
- Ball screw work is often subjected to bending, torsion, fatigue and shock, while also bearing friction on sliding and rotating parts. The damage form of ball screw is mainly worn and tired. Therefore, its performance requirements as a whole must have good comprehensive mechanical properties (that is, a certain amount of strength and toughness) and high dimensional stability, working parts (raceway, diameter of axle) requires a high hardness, high strength and wear resistance. You are recommended to go to hymanu
- Q: Which mobile shear fork lift is better
- Mobile shear fork lift There are four major systems, The mechanical structure system,
- Q: What is the phenomenon of the worker's transport of wood using a lift
- The stationary elevator is a kind of stability and stability, can not move can only hold the homework, makes the high-altitude homework to be easy. The transport of goods mainly used in production lines or between floors; The material is up and down. Adjust the height of the workpiece when the workpiece is assembled; Top feeder: Lifting up parts when large equipment is assembled; Material on large machine tools; The warehousing and loading and unloading facilities shall be equipped with the loading and unloading of goods such as forklift truck.
- Q: The single fork hydraulic lift platform
- Did this problem simple, 1 is installed support valve, 2 if supported hair that is inside the valve body is dirty, 3 is the relief valve to have stuck inside, 4 support electromagnetic valve core have stuck inside, taixing new energy of hydraulic machinery factory
- Q: Why is the large laser engraving machine plus half the platform?
- About whether to lift: all are generally two kinds of the lifting methods at present, screw support lifting and hydraulic elevator, screw because of the limitation of itself bearing part can only support plate lifting platform, so generally make some lifting; Hydraulic lift, JQ1325 hydraulic lift can be fully raised, the hydraulic platform can carry 4-10 tons of stone. More questions can be asked about the r&d department of jinan jinqiang laser digital control equipment co., LTD.
- Q: There are several categories of mobile elevators
- Knowledge of mobile elevators is almost there. Mobile hoist considering the mobile convenience more considering the high stability, wide operating platform and high bearing capacity, can make the work high above the range larger, more wide, many people work at the same time. Improving the efficiency of the work is a safe place for people.
- Q: How does the elevator repair
- All parts should be filled with lubricating oil to extend the life of the bearing. The oil and oil level of hydraulic oil. The platform rises all the way up, and in this position, the hydraulic pressure should be 40 to 50 mm above the bottom of the box. Hydraulic oil is a variation of dark, sticky or grit, such as a discovery should be replaced in time (32 # hydraulic oil) Annual maintenance A. check all the hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. C. the elevator hydraulic oil is put in the rejected, tighten the joint remove oil filter, after cleaning, use compressed air is clean, and then back into the tank, and the connecting line. (put on new oil and don't keep using the old oil. Otherwise, the moving parts in the system will accelerate the wear and tear.)
- Q: The purpose of the rail elevator
- The product structure is strong, the load is large, the lift is stable, the installation maintenance is simple and convenient, is the economical and practical low floor space to replace the elevator's ideal cargo transport equipment. According to the installation environment and use requirements of lifting platform, choose different optional configuration, can achieve better effect, the use of this product is mainly used in chemical, high temperature and high pressure, power plant, the nuclear industry base, such as explosive explosion protection enterprise.
- Q: Diablo ii flame volcanic mission will not be able to jump
- Instead of letting you jump on the platform, let you jump across the plank on the side wall of the platform, which is used upstairs. Just go to the opposite side.
- Q: What is the main shaft of the horizontal milling machine
- A kind of widely used machine tools, can be processed on milling machine plane (horizontal, vertical plane) and groove (key, T slot, dovetail groove, etc.), tooth parts (gear, spline shaft, wheel lovely, spiral surface (screw, screw groove), and various surface. In addition, can also be used for the surface of solid of revolution, inner hole machining and cutting work. Milling machine at work, workpiece loading on the worktable or dividing the first attachment, cutter rotating movement, accompanied by a table or milling head feed movement, the workpiece can obtain the required processing surface. Because the cutter is intermittent, and high productivity of milling machine
Send your message to us
Self-propelled aerial working platform PSS400AX
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
