Rubber Hose High Presure For Autopart Gas
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Basic Info.
Model NO.:1/4"-12"
Material:Nitrile Rubber
Color:Black
Capability:Rubber Oil Hose
SAE Standard:ID From 6mm to 127mm
DIN Standard:ID From 6mm to 127mm
API Standard:ID From 51mm to 152mm
Export Markets:Global
Product Description
High Pressure Rubber Hose
CONSTRUCTION:
This hose consists of an inner tube of oil synthetic rubber, mutipule wire braid or spiral as reinforcements, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, fuels, lubricants, emulsion, hydrocarbons etc.
WORKING TEMPERATURE: From -40° C up to +100 ° C
Standard: SAE, DIN, API, GB/T3683, GB/T10544 GB/T24145
This is the intercooler intake hose, which contains the material silicone and fluorine. The inner tube
uses the FKM and the outer one with the VMQ. The reinforcement is aramid.Our products are well produced and we have done such test programs:
1)Test items:Performance
2)Hardness:60±5 Shore A
3)Tensile strength:≥12Mpa
4)Elongation:≥200%
5)Burst strength:≥1.0Mpa
6)Adhesive strength:≥3.0KN/M
7)Pulse capability:The inner temperature190°,outer temperature 120°,the test pressure 0~2.5bar,pulse frequence 0.25HZ,vibration shift 25mm,vibration shift 1HZ,300000 times no crack
8)Property after heating aging:hardness change 0~15 Shore A,tensile strength change≤-30%,elongation change≤-50%
- Q: What are the uses of rubber materials in automobiles?
- Automobile shock absorber rubber products. Rubber shock absorption products can play a big part in the shock absorption of cars. It is also an important part of the car. Rubber springs play a big part when we come across a pit on our way to the car. It ensures that we keep balance on uneven roads and keep on driving. There are also some key components of the shock absorber that can withstand the pressure on the parts. Therefore, the use of rubber products in the automotive industry has long been indispensable, and will only continue to innovate more and more rubber auto parts
- Q: General car ordinary car had a puncture can continue to open it, most can run far?
- The tyre is not recommended to continue under low pressure. (please check the cause of the tire depression; for example: nail sticking, cutting, rubber aging, cracking, etc.).
- Q: What's the use of a black rubber tube under the engine of a moped?
- There is a black rubber hose under the engine. It may be a waste pipe or an exhaust pipe.
- Q: How to properly clean automobile engines, rubber and tires and other parts?
- The procedures for cleaning and beautifying the engine are as follows:(1) before scrubbing, remove dust or fine sand with a brush or jet gun.(2) be sure to spray detergent onto a sponge or brush before wiping it.(3) the black resin parts can be cleaned and protected by plastic parts, so that the wax can be renewed. If it is sprayed directly, it may be sprayed into the place where it should not be sprayed.
- Q: What adhesive do you use for rubber seals on sunroof and glass panels?
- Owner Hello, as you said, it is recommended to use glass adhesive. Line maintenance technician for your answer, please refer to solve, I wish you a pleasant driving.
- Q: What is the difference between the bottom rubber and the foot pad?
- When it comes to floor sizing, all the chairs should be removed, whether they are hand sewn or shaped, and they will be a whole after they are finally put on the bus.Car mats are not the same, are generally five, and now popular Ottomans are special car, that is to say, in general, it is necessary to shop a layer of glue, and then buy a foot pad shop. Because if you want to dismantle the earth glue, it is necessary to dismantle the seat, inconvenient, and it does not dust, no water absorption. The Ottomans are small in size and easy to disassemble. When the pads are dirty, they can be cleaned as soon as they are taken down, while the pads have a protective effect on the glue or carpet of the car.
- Q: How long does the car seal need replacing?
- Car owners in the use of car detergent cleaning doors and windows sealing tape, it is best to coat a layer of permeability protective agent, so as to prevent the sealing strip aging, but also greatly improve the sealing strip sealing. In addition, the gap between the sealing strip is easily filled with dust, which causes corrosion. For this reason, dust and sand should be removed with a brush.
- Q: The role of particle glue on automobiles
- Functional characteristicsThe corrosion protection of the chassisThe stone guard3 earthquakeThe insulating oilThe sound insulation and noise reductionThe anti drag bottomThe maintenance cost
- Q: The side tire of the car has been knocked off a block of rubber. Can it be used?
- There is no steel wire on the side of the tire. The side injury is most dangerous. I suggest changing this tire as a spare tire. Especially don't run high speed.
- Q: The tires are badly worn. Replacing tires means replacing rubber, not changing hubs
- The second generation of the outer raceway has a flange for securing the bearing, which simply attaches the bearings to the axle and is secured with a nut. Make the maintenance of the car easier. The third generation wheel bearing unit is a combination of the bearing unit and the anti lock brake system. The hub unit is designed with an inner flange and an outer flange, and the inner flange is bolted to the drive shaft, and the outer flange fits the entire bearing together.
Send your message to us
Rubber Hose High Presure For Autopart Gas
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
