PVC Pressure Pipe Environment-friendly Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:The selection of valves and fittings has the following requirements
- The selection of hose inner screw thread joint can be rotated, because not hose and the joint body can rotate freely after buckling, configuration of internal thread after disassembly for hose.
- Q:How to replace natural gas hose? Steps?
- Rubber products are rotten, especially the kitchen fume gas hose to erosion, and temperature will cause the hose and hose aging, but also bear the pressure of gas altar, for safety, or in accordance with the gas company's proposal to replace a 2 year.
- Q:Access toilet water inlet hose joints, how to repair water?
- However, be careful not to hold back too much to prevent the toilet from being cracked. Because before if overwind, or rust, is not open, can only remove the drainage valve inside with a pipe wrench stuck open.
- Q:What are the materials used in rubber joints? What are their advantages?
- While the three EPDM is ethylene propylene diene hydrocarbon, and non yoke of three yuan is the main characteristic of copolymer, excellent oxidation resistance, ozone resistance and anti erosion ability, also has excellent curing characteristics. Simple speaking is resistant to high temperature.The nitrile rubber by emulsion polymerization at low temperature, excellent oil resistance, high abrasion resistant, good heat resistance, strong adhesion. (oil).
- Q:Which is safer for stainless steel bellows and rubber tubes for gas pipelines?
- Stainless steel bellows, quick fitting joint, good strength. Hose connections are end face seals, greatly improving the reliability of the seal, and some gasket material using PTFE, and its life can be consistent with the tube body, can reduce the number of maintenance or replacement.
- Q:Can black soft rubber pipes be used as water pipes? Why is there a pungent odor?
- Black rubber hose is not suitable for water pipes, black rubber tube, or all the use of recycled rubber is very high; and black rubber tube is generally industrial use.
- Q:The difference between the rubber pipe and PE pipe?
- Rubber tube, this product is a rubber tube products, with oil, acid, alkali, heat, pressure and other characteristics of the transmission and attract rubber hose. Most rubber tubes are non-toxic and environmentally friendly, but some of the higher demand oil and gas pipes add flame retardants to the rubber material. The flame retardants contain toxic and harmful substances which can have a slight effect on the human body and the atmosphere. Rubber tube and characteristics; physiological inertia, UV resistance, ozone resistance, resistance to high temperature (-80 to 300), high transparency, strong resilience, resistant to compression permanent deformation, oil resistance, impact resistance, acid and alkali resistance, wear resistance, flame resistance, voltage, conductive properties. Apply to supporting electrical appliances, electronics, furniture, equipment, toys, hardware, medical equipment, sporting goods, audio, lighting, machinery, automobiles, motorcycles, ships, aviation, and other fields.
- Q:Can the natural gas hose not exceed 1.5 meters or 2 meters?
- If the gas is longer, to Caution! Protective tube wall, as far as possible, to prevent accidental damage risk of gas pipe.
- Q:Plastic coated metal hose flexible conduit joint what treatment
- Joints are generally zinc alloy material, the surface can be plated hard chromium treatment, plastic pipes and many types of joints can match
- Q:Latex tube, rubber tube, silicone tube, which three of the best tightness?
- Ding Ji rubber: usually used as a silicone hose material used, in general, the sealing ability of silicone hose is better than the rubber hose. So, in life or in the industry need to seal the tube will take into account the silicone hose.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pressure Pipe Environment-friendly Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
