PVC Pressure Pipe Corrosion Resistant Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
2.Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: What happened to the soft rubber flat?
- A slightly heated or pressurized medium will return to its original condition.
- Q: What is the essential difference between rubber expansion joint and rubber joint?
- Rubber joint is a kind of pipe joint with high elasticity, high air tightness, medium resistance and weather resistance. The product uses rubber elasticity, high air tightness, medium resistance, weather resistance and radiation resistance etc., using polyester cord fabric skew high strength, strong stability and the hot and cold composite, after high pressure, mold temperature and curing. As the rubber joint has good comprehensive performance, it mainly acts as shock absorption, noise elimination and noise reduction. Therefore, it is widely used in chemical, construction, water supply, drainage, petroleum, light and heavy industries, freezing, sanitation, plumbing, fire fighting, power and other infrastructure projects.
- Q: Acid burette and how to distinguish the basic buret
- The following is a rubber tube acid basic titration burette is below the piston
- Q: Excuse me: how can a pen with a rubber tube attract more ink?
- Pull out the iron sleeve outside the rubber tube and suck it again and again
- Q: The main features of Linatex rubber tube or what are the characteristics?
- The main characteristics are excellent wear resistance, high impact resistance, high pressure resistance
- Q: How can the hose of natural gas be connected to the water heater?
- It should be noted that when the nut is installed, pay attention to each nut must have plastic or rubber soft gasket, gasket must be flat, it plays the sealing role of the joint of the pipe joint.
- Q: What kind of material is the rubber tube with acid, alkali and high temperature resistance made of?
- To acid, but also high temperature resistant material, only silica gel can do. Silica gel has a high temperature resistant material, can be used at 300 degrees high temperature for a long time, instant high temperature can reach 350 degrees. It's Jiao Jiao in the rubber hose.
- Q: How to identify the quality of rubber pipes for sewage treatment?
- The general hose inside and outside the adhesive layer material with natural rubber, styrene butadiene rubber or butadiene rubber; hose with chloroprene rubber, nitrile rubber; acid and alkali resistant, high temperature resistant hose with ethylene propylene rubber, fluorine rubber or silicone rubber etc.. Structure: hose structure is usually divided into inner layer, outer layer and skeleton layer (or middle layer). The inner layer directly bears the abrasion and erosion of the conveying medium; the outer rubber layer protects the inner part of the hose from the damage and erosion of the external environment; the stock price is the pressure bearing layer of the rubber tube, and gives the strength and rigidity of the tube body. The working pressure of the hose depends on the material and structure of the skeleton.
- Q: Difference and application of rubber joint and rubber expansion joint
- Rubber expansion joint is also called rubber joint, flexible rubber joints, rubber soft connection, soft joints, rubber expansion joint is formed by high temperature plastic rubber, rubber expansion joint and makes full use of the characteristics of rubber elasticity, high resistance, medium resistance etc..
- Q: What's the difference between hose and hose for compressed air?
- Generally, they are bundled into difficult to buy, no need to stand upright, probably because I have not seen large caliber. I also think this thing has absolutely nothing to stand up to. You say the hard one is probably covered with rubber and steel ring inside. Generally used to connect peripherals and larger gas equipment. The hoses we call are generally not very rigid. It breaks easily because it is too hard. Use often put hose made of spring shape, prevent the discount of breath
Send your message to us
PVC Pressure Pipe Corrosion Resistant Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
