PPR Male Elbow Plastic Pipe Fitting Connecting Civil Construction Agricultural PE Pipes

Ref Price:
$3.40 - 41.00 / pc
Loading Port:
Payment Terms:
TT or LC
Min Order Qty:
3000 pc
Supply Capability:
100000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

PPR Male Elbow Plastic Pipe Fittings

Mainly used to connect civil construction, industrial, agricultural and landscape irrigation drainage system PE pipes


Main Features of PPR Male Elbow Plastic Pipe Fittings

1, health, non-toxic: the various parts of the pipeline system consists of PP-R pipes and fittings constituted can be completely non-toxic, health indicators in line with GB / T17219 standards.
2, does not rust: PH value can withstand a wide temperature range, in the range of 1 to 14, a high concentration of acid and alkali corrosion.
3, wear-resistant, non-fouling: PP-R pipe and tube inner wall smooth, uniform flow resistance is small and does not scale.
4, reducing vibration and noise: PP-R pipe has excellent insulation properties, can significantly reduce the vibration and noise caused by the flow of liquid.
5, anti-cracking: PP-R materials excellent elasticity makes pipes and fittings sectionally With frost expansion of the liquid together without bursting.
6, anti-condensation, heat loss is small: PP-R material is a poor thermal conductor, reduces condensation and reduce heat loss less.
7, anti-electric corrosion: PP-R material is a poor conductor of electricity can avoid corrosion. Complete specifications: 10-30 optional    


Pictures of PPR Male Elbow Plastic Pipe Fittings

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the common connecting methods for plastic PP pipes?
Because the hot melt connection method does not need any additional material, and can melt the connection part as a whole, achieves the body strength, the connection effect is good, therefore, here recommends the use of hot melt connection method. The use of hot-melt bonding method should pay attention to the following: first, the hot melt tool to connect the power supply, to the working temperature, the indicator light before the start of operation; II. Cutting the pipe material, you must make the surface perpendicular to the pipe axis. The general use of pipe cutting scissors or pipe cutting machine, using sharp hacksaw when necessary, but after cutting the pipe section should remove burrs; the PP pipe and pipe connection end must be clean, dry and free of grease; the welding elbow or three pass, according to the requirements of design drawings, we should pay attention to its direction in a straight direction pipe and tube, mark the location with the auxiliary mark the connection, no rotation; the end of the guide tube heating sleeve is inserted into the standard depth, at the same time, no rotating the pipe onto the heating head and reached the prescribed mark; the heating time is reached after, immediately put the pipe and pipe fittings from the heating sleeve and the heating head removed simultaneously, quickly and without rotation inserted into the standard depth, making joints form a uniform flange of the joint can be corrected, but not the rotation; to a prescribed cooling time, will The pipe cover is buckled on the pipe fittings.
Q:Antistatic flame retardant PE plastic pipe installation, what should pay attention to?
1 、 cut the pipe according to the required length, remove the burr of the pipe port and chamfer 30 degrees.2. Insert the pipe into the bottom of the pipe mouth and mark it at the interface of the pipe and the pipe. Then mark the tube out of the 10mm with this mark. Make second more marks. Clean the outer side of the pipe and the inner side of the pipe. Apply a lubricant (not oil or grease).
Q:What are plastic PVC pipes and pipe fittings made of?
Forming equipment: pipe material, extruder, pipe fittings, injection moulding machine.
Q:Can the PPR pipe be injected with the same pipe as the PVC pipe?
Tolerable。 As long as it is thermoplastic, all injection molding machines can be produced.
Q:What is the PVC pipe fitting?
PVC (full name Polyvinylchlorid) for polyvinyl chloride, in addition to other ingredients to enhance its heat resistance, toughness, ductility and so on. The top layer of this surface film is lacquer, the main component is polyvinyl chloride, and the bottom layer is coated with adhesive. It is a very popular, popular and widely used synthetic material in the world today. Its global usage ranks second in various synthetic materials. According to statistics, only in 1995 a year, PVC production in Europe, there are about five million tons, while its consumption is five million and three hundred thousand tons. In Germany, PVC production and consumption averaged one million and four hundred thousand tons.
Q:Can a plastic pipe be evacuated into two vacuum?
Yes, the polypropylene material can be made into a vacuum.
Q:About plastic drain pipe expansion joint?
Expansion joint, also known as telescopic joints. The long distance pipeline also has expansion and contraction when there is temperature change, in order to protect the pipeline, when the heat rises and contracts cold, the pipeline will not be damaged, and the case is guaranteed without leakageThe expansion and contraction of the pipeline play a regulating role in order to avoid the pipe being broken or cracked.
Q:What is the difference between plastic pipe fittings and hot melt plastic water supply pipe fittings?
PSP is the abbreviation of steel plastic composite pressure pipe, P is PE or PPR, PERT and other materials should be the initial letter, S steel English letter referred to, as the name suggests PSP is sandwiched between two layers of plastic steel, with the aim of internal and external corrosion types, such products generally have high water to melt connection pipeline, inside and outside the plastic pipe with the use of fire, underground pipeline steel mesh skeleton.
Q:How about plastic pipe fittings?
The length or depth of the connecting part of the pipe (called the socket in the standard) is long enough. Irregular production of pipe fittings, in order to reduce costs, deliberately Jerry built, socket is generally shorter, so that in the future use of the joint leakage easily. If from the angle of safe use, the longer the socket depth, the more users can compare or actual measurement. From an economic point of view, however, the minimum socket depth is given in the standard. 5., pay attention to the purchase of pipe fittings and pipe matching issues. First try several times into the pipe inserted tube, should not feel difficult, but after inserted into not too loose for good.
Q:Indoor plastic water supply pipe, 20 of the 20 refers to the inside diameter or outside diameter?
20 of the indoor plastic water supply pipes, 20 of the diameter, refers to the outer diameter.The water supply pipe is divided into metal pipes, composite pipes and plastic pipes. The metal tube is mainly divided into the copper tube and the stainless steel water pipe. The metal pipe has many characteristics, such as safety, sanitation, durability and so on. It is the most ideal water pipe for the home outfit.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range