PPR Composite Pipe - FRP Lightweight High Pressure Latest Styles
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 111 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PRODUCT DESCRIPTION
1.Pipe Introduction
It is the ideal product for the transportations of the chemicals, drinking water, waste water, waste gas and sewer.
2.Characteristics
• Corrosion resistance High mechanical property
• Low friction coefficient
• Light weight
• Non toxic
• Maintenance free
• Long life span
3.Production Range
Any type and specification RPMP of diameter DN400-DN4000 and pressure PN0.25-PN2.5MPa can be produced. Also, we can provide the customized product according to user’s specific requirements.
TECHNICAL DATA
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
CHARACTERISTICS
1. High anti-corrosion capability, long designed service time of 20 years;
2. Good hydraulic property, smooth inner surface with absolute roughness of 0.01mm, which is far less than that of carbon steel pipe or cast iron pipe;
3. Lightweight and facility to install and transport;
4. High specific intensity and reliable mechanical performance;
5. Low thermo-conductivity and small thermo-stress, which are allowed to be used in various conditions: exposed buried or suspended, in ocean or in deserts, freezing or humid;
6. Less joints and rapid assembly design: According to concrete engineering conditions, there are a several ways of connection designed for clients to choose, which include Adhesive-bonded Plug Joint, Adhesive-bonded End-to-end Joint, Flange Joint, Plug Joint with O-ring Gasket(with key-lock) and Thread Joint etc.
COMPANT DESCRIPTION
CNBM,China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products,professional service and complete solution to our customers. Strong delivery capacity, advanced technology& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PACKAGING & DELIVERY
1.Packaging Details
Standard packing or your requirement
2.Delivery Detail
Shipped in 30 days after payment
FAQ
1.Q:Are you factory or trading company ?
A:We are Factory produce FRP machines and FRP products.
2.Q:If can customized by customers requirements?
A:yes,we can produce the machine with customized size.
3.Q:How about the payment?
A:We accept any kind of payment.
4.Q:What is the guarantee?
A:Gurantee is one year.
PICTURES
- Q: Winding method of glass fibre reinforced plastic pipeline anticorrosive glass fiber cloth
- 1) first, apply the release agent on the molding surface of the glass lined sand pipe mold (or a transparent cellophane on the outer surface of the mold);2) after sufficient drying, the magnesium oxychloride cement with initiator (or curing agent), accelerant and other additives is evenly coated on the molding surface of the die;3) then put a good glass cloth on the glass lined sand pipe;4) then apply the magnesium oxychloride cement on the paved glass cloth and take care to remove the bubbles.5) with good magnesium oxychloride cement paste then with cut glass cloth;6) repeat this operation until the GRP sand pipe reaches the design and gauge thickness.
- Q: The difference between FRP process tubes and GRP tubes
- Kashi Eisa's goal is to increase stiffness (large pipe defects) and reduce costs, and process tubes (mostly small tubes), these two aspects are no problems;
- Q: What are the differences between inorganic FRP pipes and plexiglass pipes, what are the advantages and disadvantages?
- Fiberglass pipeacid: organic resin and glass fiber cloth hand pasting a small proportion of strength and long life advantages
- Q: What are the disadvantages of glass fiber reinforced sand pipe?
- Glass reinforced plastic sand pipe is mainly to increase the rigidity of the pipe, the relative wall thickness of pure glass steel tube, low compressive strength, shock resistance decreased.
- Q: Galvanized steel sheet and inorganic glass fibre reinforced plastic pipe are calculated according to this norm or norm
- The use of a fixed fare set without further consideration to duct losses has been included in the quota project
- Q: What is the standard of flange coefficient for FRP ducts?
- Can be explained in this way, the flange width is generally 50, on both sides that is 100, flange thickness is calculated as two times the thickness of the pipe, or 200. The duct length is 2000 knots, and 200 is 2000 of the 10%
- Q: What are the advantages of glass fiber reinforced plastic sand pipe than HDPE pipe?
- Both have their merits, but it depends on their choice!
- Q: Are there any differences between FRP pipes and FRP pipes?
- Air duct is a pipe system used for air transportation and distribution. There are two kinds of composite air duct and inorganic air duct. The duct can be classified according to the shape and material of the section. Duct made of stainless steel duct, in the bite mouth, rivet joint, flange, four corners and other cracks painted with sealant (such as neutral glass glue). Surface dust and grease shall be removed before applying sealant. According to the section shape, the wind pipe can be divided into circular duct, rectangular duct, a variety of flat air pipe, wherein the circular duct resistance minimum maximum height, making complex. Therefore, the application of rectangular wind tube based. According to the material, the air duct can be divided into metal wind pipe, composite air pipe and macromolecule air pipe.
- Q: What is the thickness of all types of FRP pipes?
- Glass fiber reinforced plastic pipe is also called glass fiber winding sand pipe (RPM pipe). Mainly to the glass fiber and its products as reinforcing material, polymer composition of unsaturated polyester resin, epoxy resin as basic material, quartz sand and calcium carbonate and other inorganic non-metallic particles as filler materials as the main raw material.
- Q: What are FRP pipes used for making? What raw materials?
- Reinforced plastic made of glass fiber or its products as reinforcing material. Entitled "glass fiber reinforced plastics" or "glass fiber reinforced plastics". Because of the different kinds of resins used, they are called polyester glass fiber reinforced plastics, epoxy glass fiber reinforced plastics and phenolic resin glass fiber reinforced plastics. Glass has a hard and brittle, has a good transparency and high temperature resistance, corrosion resistance and other properties; at the same time, steel is very hard and not brittle, but also has high temperature resistance characteristics.
Send your message to us
PPR Composite Pipe - FRP Lightweight High Pressure Latest Styles
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 111 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
