Optilite/Optisolar/Optiselec U series Ultra-clear Low-E glass
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product introduction:
LOW E GLASS is a member of the coated glass family coated with one or more layers of metal or compound films on the quality float glass by using magnetic sputtering method. It has low thermal conductivity and high light transmittance, ensuring visible light transmittance and reducing light pollution based on prevention of heat losses. LOW-E Glass is widely used in large-sized curtain wall and decorations because of its luxury, comfortable and energy saving features.
Characteristics:
1.Extremely high safety performance, near zero self-explosion, first choice for ultra high buildings.
2.Excellent energy efficient performance, and cut the winter heating energy consumption more effectively.
3.Improved solar transmittance and best choice for passive solar buildings.
4.High visible light transmittance and excellent transparency.
5.Excellent color rendering performance and exhibit the original design of the building more vividly and authentically.
6.Crystal clear and transparent, noble and elegant.
Applied areas: all areas
Applied building: public, commercial and residential buildings
Recommended application: superm high-rise buildings and all-glass facade buildings
| Product Configuration | Colour | Tvis% | Visible light | Solar energy | U-value（W/m2.K） | SC | SHGC | LSG | |||||
| Rvis% | Solar | Air | Argon | ||||||||||
| Out | In | Tsol% | Rsol% | Winter | Summer | Winter | Summer | ||||||
| Optilite/Optisolar/Optiselec U series（Ultra clear Low-E insulated glass） | |||||||||||||
| 6Optilite US83+12A+6UC | Neutral | 80 | 13 | 13 | 57 | 23 | 1.80 | 1.80 | 1.57 | 1.55 | 0.68 | 0.59 | 1.36 |
| 6Optilite US83+16A+6UC | Neutral | 80 | 13 | 13 | 57 | 23 | 1.86 | 1.59 | 1.62 | 1.36 | 0.68 | 0.59 | 1.36 |
| 6Optilite US1.16+12A+6UC | Neutral | 83 | 13 | 13 | 60 | 30 | 1.74 | 1.72 | 1.48 | 1.35 | 0.71 | 0.62 | 1.34 |
| 6Optilite US1.16+16A+6UC | Neutral | 83 | 13 | 13 | 60 | 30 | 1.79 | 1.48 | 1.54 | 1.16 | 0.71 | 0.62 | 1.34 |
| 6Optisolar UD65+12A+6UC | Grey | 61 | 15 | 16 | 31 | 29 | 1.72 | 1.69 | 1.45 | 1.39 | 0.39 | 0.34 | 1.79 |
| 6Optisolar UD65+16A+6UC | Grey | 61 | 15 | 16 | 31 | 29 | 1.76 | 1.44 | 1.51 | 1.19 | 0.39 | 0.34 | 1.79 |
| 6Optisolar UD70+12A+6UC | Powder Blue | 65 | 16 | 18 | 34 | 34 | 1.71 | 1.67 | 1.43 | 1.47 | 0.43 | 0.37 | 1.76 |
| 6Optisolar UD70+16A+6UC | Powder Blue | 65 | 16 | 18 | 34 | 34 | 1.75 | 1.42 | 1.49 | 1.16 | 0.43 | 0.37 | 1.76 |
| 6Optiselec UT72+12A+6UC | Grey | 71 | 13 | 14 | 28 | 53 | 1.63 | 1.57 | 1.35 | 1.25 | 0.34 | 0.30 | 2.37 |
| 6Optiselec UT72+16A+6UC | Grey | 71 | 13 | 14 | 28 | 53 | 1.68 | 1.30 | 1.41 | 1.03 | 0.34 | 0.30 | 2.37 |
Note:1.The performance data are calculated by LBNL WINDOW 6.3 according to ASHRAE NFRC-2010 standard condition.
2.The performance data are only for reference. Jinjing will hold the right of final interpretation.
Key Characteristics:
Light to Solar Gain Coefficient LSG 2.37
Thermal Conductivity Coefficient U Value 1.03 W/㎡·K
FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your company？
A world class manufacturer & supplier of Optilite Offline High Performance Bent Temperable Low-E glass，is one of the large-scale professional investment mineral production bases in China. Annually more than 300000 m2. Optilite Offline High Performance Bent Temperable Low-E glass are exported to markets in Asian, American, Middle East, African. OEM service available according to customer’s requirements.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within two month days, We will arrange the factory delivery as soon as possible.
- Q:Architectural glass companies need to apply for which qualification documents
- The material of the glass consists of three parts: basic raw materials, flux and colorant, as well as decolorizing agent, clarifying agent and emulsifier.
- Q:In Sims 2 castaway for PS2 where can i find fine sand? I need it to build glass.?
- Fine Sand is found on Crystal Island(the 4th island). You need a lot of it to make glass and you need to use the Forge in the temple to craft the glass. You also can get Fine Sand in other ways: 1. Get from Chimp... ask your chimp to get resources, but it's hard to get this way. 2. Get from Crew Mates, sign job most of your tribe as Resources Collectors. If you lucky they will bring it with them.
- Q:China insulation film which company is better? Is it really effective?
- Must have some, after the home posted at noon obviously did not feel so hot, is the China Wu Zhuo glass film company posted
- Q:Tough glass film is good or matte film good?
- Matte film is to make the glass opaque, enhance privacy. Its advantages are: 1. frosted glass film for the architectural glass wall add luster, so that the appearance of the building more beautiful. 2. Scrub glass film auxiliary interior design, beautify the office partition. 3. Scrub glass film to provide special labeling services, custom customer icon / mark. 4. Matte glass film to create a private, free private space. 5. Matte glass film rich color, style transformation flexibility, creative simple to achieve, compared to the traditional carved pattern glass, more beautiful, more clear. 6. Frosted glass film to reduce visual interference, but also make full use of light, for the office partition, restaurants and stores an excellent choice. 7. frosted glass film to reduce glare glare, frosted film to reduce visual fatigue, protect eyesight, improve the work environment of the building. 8. frosted glass film safety and environmental protection, glass matte film with enhanced glass strength function, is against earthquakes, hurricanes and outdoor explosion of reliable weapons, but also to prevent criminals easily broken window into the room, to prevent the glass fragmentation splash wounding, effective protection Personal safety.
- Q:I wanted to build a glass ant farm but instead of using wood or plastic for the frame I wanted to use molding clay. Can I use the clay to build the frame to hold the two pieces of glass and to make a removable top or will it hurt my ants???
- Using plaster would be better than clay. Fired ceramic clay would also be fine, but that gets fairly complicated. If you use plaster it will be fairly easy, but you have to build a frame for your ant farm out of wood or use a suitably sized plastic or strong cardboard box. You could take a plastic box, put one plane of glass down. Use modeling clay to make the chambers for your ant farm. Make sure you connect them. Then mix plaster and cover everything so high you can still see your chambers. Put second pane of glass on it. After plaster has set, you should be able to remove one pane of glass, get out the modeling clay, then put the pane back on, you can use small clamps if necessary. Plaster is pretty good for an ant farm since it soaks up water. You don't want an ant farm to be absolutely dry, that isn't good for the ants. They need a certain humidity. Of course you don't want it really wet either, you'll have to observe the ants to see what they prefer. You can water the ant farm periodically or put one side into water so it soaks up some water. You also have to move the ants to a new ant farm once in a while, since the ant farm will become dirty. Make sure you feed the ants proteins and not just sugar. Make sure you have an ant queen. A good way to start an ant farm is to collect a queen if you see one outside. Since ants swarm, that is a good time to find a lot of queens. Make sure the queen doesn't have wings any more, only then she is mated.
- Q:What kind of glass is the glass?
- Clamp glass also known as shredded glass or wire glass. It is produced by the calendering method, that is, in the glass melting state will be preheated steel wire or wire into the middle of the glass, the annealing, cutting made. The glass surface can be embossed or polished, and the color can be made into a colorless, transparent or colored.
- Q:GB / T16589 instead of which specification
- GB / T 28887-2017 Plastic window for construction is the first edition, so there is no substitute for other older versions. The specification refers to: GB / T 2680-1994 Building glass visible light transmittance, direct sunlight transmittance, solar total transmittance, UV transmittance and the determination of the relevant window parameters, GB / T 5823-2008 Building doors and windows terms, GB / T 7106-2008 Building exterior window windows airtight, watertight, wind pressure performance classification and testing methods, GB / T 8484-2008 building outside doors and windows insulation performance classification and testing methods, GB / T 8485-2008 building windows and doors air sound insulation (PVC-U) profiles, GB / T 11793-2008 Non-plasticized polyvinyl chloride (PVC-U) plastic doors and windows, mechanical properties, GB / T, And GB / T 11976-2002 GB / T 14436-1993 General rules for industrial product assurance documents, GB 50009 - 2001 (2006) JGJ / T 151-2008 Technical code for the application of architectural glass, JGJ / T 151-2008 Code for thermal calculation of glass curtain wall for building windows and doors, GB Building doors and windows.
- Q:This is either a milling interpretive center or some sort of museum or gallery. Its shell is very old and decayed but they put a new glass and steel building inside it. The most popular photo is a view from the river in the evening
- Can you be more precise? Have you any idea where this mill is? In the United Kingdom, or in the United States, or somewhere else? The first thing that comes to my mind is the Louvre museum, in France, but I don't think you're talking about that. There is also the Crystal Palace, which used to be in Hyde Park, London. It was first built for the 1851 World Fair. I suggest you visit the Wikipedia article for a few pictures.
- Q:The world invented several kinds of glass
- Tempered glass is not easy to break, even if the broken will be no acute angle in the form of particles fragmentation, greatly reduced damage to the human body. ? Frosted glass. It is also in the ordinary flat glass above the re-matte processing. General thickness of more than 9% below the 5,6 cm thickness with more. Sandblasted glass. Performance is basically similar to the frosted glass, different grinding sand for the blasting. As the two visually similar, many owners, and even decoration professionals put them confused. Embossed glass is a flat glass produced by calendering method, its biggest feature is translucent opaque, and more used in the bathroom and other decoration area. ? The use of calendering method, the metal wire or metal mesh embedded in the glass plate made of a kind of impact with flat glass, the impact will only form a radial crack and not fall into the wounds. Used in high-rise buildings and strong shock of the plant. ? Hollow glass. Adhesive method to use two pieces of glass to maintain a certain interval, the interval is dry air, sealed and sealed with the surrounding material, mainly for the sound insulation requirements of the renovation works.
- Q:I'm building an aquarium. The size of my tank is going to be 8 feet by 3 feet with 5feet height. What is the better material to build an aquarium with (Glass or Acrylic)?
- Glass. Acrylic can't take the strain. In any case you will need braces in there, 3 or 4 at least.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Optilite/Optisolar/Optiselec U series Ultra-clear Low-E glass
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
