1). Material: Zinc alloy die cast housing and cylinder.
2). Mechanism: Pin tumbler
3). Finish: Chrome plating/ Nickel plating/Titanium plating/Black plating.
4). Dimension: D18*L20mm & D18*L16mm
5). Combination/key code: 999
6). Rotation angle 90 degree CW.
7). Available in full steel key, plastic holder with steel / brass key (2 keys).
8). Key can be withdrawn in one positions.
9). keyed alike(KA) or Keyed different(KD) are available.
10). Hex nut mounted.
11). Usage: cabinets, cupboards, steel office furniture, mailbox, tool box, glass box, cash register, moneybox, locker, drawer, safe, wardrobe
12). Packing: 1 lock in a polybag, 50 polybags in an inner box, 12 boxes in an export carton, so there are 600 locks in a carton. Also can be packed as per customer's request.
- Q:The problem of the craftsman
- The stall is not making. But identification. That is to say when others point is not to do the drawings but to take drawings to identify. Another 3.4J furniture can not do it. That level of choice is to let you choose to identify a few sets of furniture lock fees charged. Only the identification of drawings. Rather than making drawings.
- Q:Assembled furniture computer desk, why this lock staggered, the connection is not tight.
- Hello this kind of plate furniture this happens. Usually because the root of the pole is too loose you put a good pole after a small hammer with it a little down to knock down, and then buckle the tightening of the lock try I was doing this kind of plate furniture, I.
- Q:This is a wooden stool, there is a drawer below, there is a fish on the drawer of the lock, the old furniture, I would like to ask if anyone knows what
- It should be what kind of wood, feel the wood is more valuable
- Q:Office furniture password lock how to solve, 82.32.53
- The best way to find a professional password lock most people really hard to get
- Q:How to open a furniture lock
- You are talking about the ball lock, or handle lock! Spherical lock top of a place, take a Phillips screwdriver can be demolished! Press the lock to get a Phillips screwdriver can be demolished! 1 to install the ball door lock to pay special attention to the end of the insurance can only be removed to install, can not be installed on the end of the key can not be installed, it is best to read the instructions carefully before installation 2 install the handle lock Should pay attention to: If left open right open swap, can not cause to open the door when the hand up, because the current market in the high-end hand locks are around the swap function, the purchase must not consider the direction of opening [/ color] 3 installation handle lock and spherical door lock, use the original design of one to one installation instructions spherical lock installation steps: A. According to the "fixed-range model" set the lock body, the center of the tongue. B. draw a circle from the center of the two points, a diameter of 54 mm lock body hole, after drilling a diameter of 25 mm lock body hole, while cutting the latch pull the nest. C. Remove the inner handle with the tip of the fitting. D. first put the tongue into the door side of the lock hole, with screws to fasten, and then lock the body, inserted from the room through the lock body hole, while the end of the latch button, so that the lock body and the tongue stand up. E. Adjust the position of the outer adjustment ring so that the center of the lock body is in the centerline of the door thickness. F. will be in the handle on the tube, with the end of the accessories to suppress the positioning card, and then pushed into the handle, so that both live. G. If you use the key and outside, inside the handle to open flexible, then the lock is installed correctly. Install and disassemble the opposite
- Q:Where is the authorization code for the dongle software lock?
- In the MENU folder under the code.txt file, copy and paste to the authorization code editor Setmodecode file on the line
- Q:Ask the carpenter master, plate furniture triple drawer lock how to count? Is there a formula?
- Please refer to the above information:
- Q:Furniture door drawer lock bad how to do
- Hardware store for sale, a few dollars to wait, they can change, the first bad to remove, and then took the sample to buy.
- Q:Smart home belongs to the trademark registration of what kind of ah
- First of all, the definition of smart home to clarify, it is a residential platform, the use of integrated wiring technology, network communications technology, intelligent home - system design security technology, automatic control technology, audio and video technology will be home life-related facilities integration , To build efficient residential facilities and family planning business management system to enhance home safety, convenience, comfort, artistic, and to achieve environmental protection and energy saving living environment. The products are mainly electronic audio equipment, which belong to category 9 electronic products and type 12 wire and cable, and the other categories of services belong to class 42 building design and consulting services and computer network services. Accordingly, your trademark focuses on the registration of 9,12,42 categories, the other to the use of smart home products or services for reference to specific registration.
- Q:Honolulu American furniture is not a chain store
- Should not be, buy American furniture, then you can consider that Lu furniture
Our company is a professional producer of cam locks. Over the years, they have been well sold both at home and abroad, favored by the majority of users.
Our company always looking forward to the sincere cooperation with domestic and foreign customers and the joint development to create a win-win situation!
1. Manufacturer Overview
|Annual Output Value
||Above US$100 Million
||North America 5.65%
South America 2.58%
Eastern Europe 4.98%
Southeast Asia 4.23%
Mid East 3.26%
Eastern Asia 0.78%
Western Europe 3.37%
Central America 0.70%
Northern Europe 1.03%
Southern Europe 0.81%
South Asia 5.22%
Domestic Market 63.04%
||ISO9001:2008 Certificate; Alibaba Honesty & Commitment Member; Bank credit; SGS Audited Supplier
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||51% - 60%
|No.of Employees in Trade Department
||5,000-10,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range