Narrow Aisle Four Wheel Electric Forklift-NA 2.0
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Forklift Description:
NA 2.0 narrow aisle, the electric forklift truck is a new revolution product which technical cooperate with UK,and combine the features of counterbalance and reach truck. Target market:Asia(except India).
1.Works in very narrow aisles
2.Lifts to height of 11m
3.Loads like a counterbalance
4.2000kg load capacity
5.Easy operation inside and out!
6.Grammer suspension seat
7.Easy battery change
8.Tilting ‘clear vision’ mast
9.Electric control system
10.Side shift
11.Tough cushion tyres
12.NA 2.0 is 20% faster than the conventional reach truck when operated in a typical reach truck aisle of 2.7m wide
Forklift control and capabilities
Forklift hydraulics are controlled either with levers directly manipulating the hydraulic valves, or by electrically controlled actuators, using smaller "finger" levers for control. The latter allows forklift designers more freedom in ergonomical design.
Hydraulic elevator for tractors
Forklift trucks are available in many variations and load capacities. In a typical warehouse setting most forklifts have load capacities between one and five tons. Larger machines, up to 50 tons lift capacity, are used for lifting heavier loads, including loaded shipping containers.
In addition to a control to raise and lower the forks (also known as blades or tines), the operator can tilt the mast to compensate for a load's tendency to angle the blades toward the ground and risk slipping off the forks. Tilt also provides a limited ability to operate on non-level ground. Skilled forklift operators annually compete in obstacle and timed challenges at regional forklift rodeos.
Forklift Specification:
Free Lift H5 | Close Height H1 | Extended | Capacity @ Full Lift Height | |
Height H4 | 500mm | 600mm | ||
1396mm | 2209mm | 4749mm | 1900kg | 1800kg |
1600mm | 2412mm | 5358mm | 1750kg | 1550kg |
1728mm | 2539mm | 5765mm | 1600kg | 1500kg |
1930mm | 2750mm | 6380mm | 1500kg | 1400kg |
2330mm | 3150mm | 7430mm | 1250kg | 1100kg |
2650mm | 3470mm | 8240mm | 1050kg | 900kg |
2770mm | 3590mm | 8450mm | 1000kg | 870kg |
3080mm | 3900mm | 9230mm | 875kg | 770kg |
3200mm | 4020mm | 9440mm | 850kg | 750kg |
3328mm | 4139mm | 9803mm | 750kg | 650kg |
Model | NA2.0 | |
Rated capactiy | kg | 2000 |
Load center | mm | 500 |
Motive power | Electric | |
Tyres | Cushion rubber | |
Lift height(standard) | H3 mm | see lift specification |
Free lift(standard) | see lift specification | |
Full free lift(standard) | mm | see lift specification |
Capacity @full lift height | mm | see lift specification |
Fork thickness | mm | 40 |
Fork Width | mm | 125 |
Fork Length | L mm | 960 |
Fork spacing(Min) | B3 mm | 240 |
Fork spacing(Max) | B1 mm | 1020 |
Mast tiltangle(forward/backward) | Deg. | 3/3 |
Overall length | L1 mm | 2550 |
Truck width | B mm | 1200 |
Height of mast-lowered | H1 mm | see lift specification |
Height of mast-raised | H4 mm | see lift specification |
Seat height | H7 mm | 1200 |
Height overhead guard | H6 mm | 2312 |
Min aisle width(1200*1000) | mm | 1750 |
Travel speed (laden/unladen) | k/h | 8.0/8.5 |
Lift speed (laden/unladen) | m/s | 0.35/0.46 |
Lowering speed (laden/unladen) | m/s | 0.40/0.34 |
Gradeability(brief/frequent) laden | % | 12/8 |
Gradeability(brief/frequent) unladen | % | 16/10.5 |
Weight of truck unladen inc.battery | kg | 6500 Nom |
Wheel load-laden Max | kg | 3600 |
Wheel load-unladen Max | kg | 2500 |
Number of wheels front/rear-driven* | 2*/2 | |
Front tyre size Diameter*Width | mm | 412*178 |
Rear tyre size Diameter*Width | mm | 457*150 |
Wheelbase | mm | 1645 |
Track Width-front/rear | mm | 1110/1200 |
Laden ground clearance M under drive | mm | 50 |
Laden ground clearance M at wheelbase center | mm | 120 |
Service foot brake | Hydraulic | |
Parking hand brake | Mechanical | |
Traction motor rating 1hr | kw | 9.6 |
Hydraulic motor rating 1/4hr | kw | 11 |
Battery Type | Tubular | |
Battery voltage | V | 48 |
Battery capacity | Ah | 700 |
Battery weight | kg | 1175 |
Speed control forward/reverse | Infinitely variable | |
Handbrake laden/unladen | % | 13/20 |
Service Brake laden/unladen | % | 15/20 |
Forklift Images:
FAQ of forklift:
Q: What’s the function of forklift?
A: A forklift truck (also called a lift truck, a fork truck, or a forklift) is a powered industrial truck used to lift and move materials short distances. The forklift was developed in the early 20th century by various companies including the transmission manufacturing company Clark and the hoist company Yale & Towne Manufacturing. Following World War II the use and development of the forklift truck has greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing operations.
Q: What’s the general operations of forklift:
A: Forklift cab with control layout.
Forklifts are rated for loads at a specified maximum weight and a specified forward center of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate without the permission of the forklift manufacturer.
Q: What are the Forklift safety Standards?
A: 1, Forklift safety is subject to a variety of standards world wide. The most important standard is the ANSI B56—of which stewardship has now been passed from the American National Standards Institute (ANSI) to the Industrial Truck Standards Development Foundation after multi-year negotiations. ITSDF is a non-profit organization whose only purpose is the promulgation and modernization of the B56 standard.
2, Other forklift safety standards have been implemented in the United States by the Occupational Safety and Health Administration (OSHA) and in the United Kingdom by the Health and Safety Executive.
3, Driver safety: In many countries forklift truck operators must be trained and certified to operate forklift trucks. Certification may be required for each individual class of lift that an operator would use.
- Q:Can a power supply of 48-volt battery pack a 12 volt fan
- 48 v battery is, but on general battery forklift truck has a DC voltage converter (also called DC - DC), find the thing, from the output voltage, find the 12 v output, wiring can be installed.
- Q:What rules do forklift drivers adhere to?
- Second, the driver should not drive after drugs and alcohol, not smoking or eating, which is the basic safe operating principle. Drivers must understand the structure and properties of vehicles, familiar with the operation and maintenance requirements, through professional training, passing the examination by the relevant department to issue certificate of approval, party must separate operation. It is strictly forbidden to drive without a license. The trainee driver must have a licensed driver with the coach and cannot operate independently. In addition, no supplier or manufacturer's license may be used to retrofit forklifts to prevent the performance of forklifts.
- Q:There are several forklift drivers in China
- The name of a forklift truck is a professional proof of a forklift driver. Forklift plays a very important role in the logistics system of the enterprise, which is the main force in the material handling equipment.
- Q:The purpose of the forklift truck
- The forklift truck can be divided into two categories: a moving truck, a stacker, a front-moving car, an electric picker, and an electric tractor. 1, the truck Carrying capacity of 1.6 ~ 3.0 tons, homework channel width is generally 2.3 ~ 2.3 meters, pallet fork hoisting height Generally at about 210 mm, mainly used in the level of the warehouse handling and loading and unloading of goods. There are three modes of operation, such as walking, driving and riding, which can be chosen according to the efficiency.
- Q:What is the difference between a forklift and a trailer for a hydraulic drive?
- Hydraulic forklift forklift and shift difference mainly include: the former relies on the hydraulic torque converter transfer engine power to the front axle achieve walking, which depend on the variable speed drive gear in the transfer engine power to the front axle achieve walking; The former is moving forward, in the car and backward by changing the direction of the oil, and the latter depends on the gear drive machinery to move forward, in the car and backward. Forklift trucks are widely used in ports, railway stations, airports, depot, workshop, warehouse, distribution center and distribution center, etc., in the cabin, car, and the container pallets of goods loading and unloading, handling, is essential to tray transportation, container transportation and equipment. With the mechanization of mechanization, the material handling of most enterprises has been removed from the original human transport and replaced with the mechanized handling of forklifts.
- Q:Is a forklift and a hug a car
- You said car is double forklifts, forklift truck can be modified, front is equipped with a quote, it is mainly used for paper pattern, such as cotton, no single evidence, a forklift truck operation certificate
- Q:What is the engine displacement of 3T forklift?
- Engine Displacement is the total volume of Engine Displacement, the product of Vh and number of cylinders. The cylinder work volume refers to the volume of gas that the piston has swept from the top to the bottom, which is also known as the single cylinder, which depends on the diameter of the cylinder and the stroke of the piston.
- Q:Is it dangerous to drive a forklift?
- Some! As far as I know forklift is dangerous, maybe you haven't contact with the line, or contact time is not long, I experience that once I driving forklift fast and then a sharp turn, forklift nearly doubled, at that time if it weren't for reflect the fast, I'm afraid his life did not have. Another time I looked at a colleague who was pushing a woman to death when he turned from the door. So you have to be careful about driving a forklift. Work 3-4 hours and you will feel mentally paralyzed, especially in the middle of the summer, so drive a forklift must be focused
- Q:The forklift oil cylinder is leaking, and the newly replaced oil seal is no good
- Inside leak, you check if the piston rod is injured. There is no scratch inside the cylinder. Let's see if the piston has a stomata. Maybe the piston and the piston rod link to where the sealing is not good. Check it out carefully.
- Q:What certificate is required to train the forklift
- A copy of the id card, two on the back. A copy of the diploma, There are four photos of the white background, the body check. The application form.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Narrow Aisle Four Wheel Electric Forklift-NA 2.0
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords