MANUAL STACKER Adjustable Forks Style- SJJA20E
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
MODEL | | SJJA20E | SJJA20E-I | SJJA20E-II |
Load capacity/rated load | Q(kg ) | 2000 | 2000 | 2000 |
Load centre distance | c(mm) | 400 | 400 | 400 |
Fork height, lowered | h13(mm) | 90 | 93 | 90 |
Height, mast lowered | h1(mm) | 2085 | 2085 | 2085 |
Max. lift height | h3(mm) | 1500 | 1500 | 1500 |
Height, mast extended | H4(mm) | 2085 | 2085 | 2085 |
Overall length | L 1(mm) | 1386 | 1425 | 1482 |
Overall width | b1(mm) | 1000 | 830 | 830 |
Fork dimensions | s/e/l(mm) | 32/120/900 | 60/170/900 | 60/166/900 |
Width overall forks | B5(mm) | 250-950 | 580 | 350-710 |
Ground clearance, laden, below mast | M1(mm) | 25 | 20 | 20 |
Aisle width for pallets 1000×1200 crossways | Ast(mm) | 2050 | 2131 | 2166 |
Aisle width for pallets 800×1200 lengthways | Ast(mm) | 2040 | 2108 | 2163 |
Turning radius | Wa (mm) | 1250 | 1250 | 1250 |
Lift speed,laden/unladen | mm/time | 18/20 | 18/20 | 18/20 |
Lowering speed,laden/unladen | mm/s | Manual control | Manual control | Manual control |
Service weight | kg | 265 | 260 | 260 |
- Q: What are the potential defects of the automated material handling system?
- The automatic stacker is a stack of finished goods that will be wrapped in a sealing machine, and the finished product will be finished by the machine hand. Demolition yards of technical difficulty than pallet, the main reason is that the original pallet good tray due to finished product deformation and vibration in the transport process, make product tray deformation, cause every demolition yards of finished tray deviating from the ideal position. In addition, due to the demolition yards tray is finished box close to finished product box, general instrument cannot be inserted between the two cases, make clamping product box, the solution is to use a vacuum sucker is finished. The mechanical manual stacker has the following advantages compared with the traditional high stacker machine. Secondly, the failure rate is low; Third, the area is small. Fourth, the cost of human resources is low.
- Q: Talk about how to cut the cost of moving materials.
- Cost direct costs and indirect costs. Direct costs are inputs and manpower.I hope my answer will help you
- Q: What is the rational and scientific classification of logistics facilities and equipment
- You can look at this book In the 21st century, the teaching materials of high vocational high vocational logistics Book this center around the logistics facilities and equipment, introduced the logistics packaging, warehouse, storage, transportation, loading and unloading handling, container unitization, port logistics, distribution processing, automatic sorting, information platform, modern logistics equipment management such as logistics facilities and equipment of theoretical knowledge and practical content. If you don't like reading, you can also check the website of the home logistics equipment.
- Q: The material needs to be transported, it is easy to produce dust.
- Subjective condition: to the extent that the transport effect is required, such as completely insulating the dust or trying to suppress the dust. What is the company's budget
- Q: The development of material handling
- Due to the improvement of industrial production automation degree and the expansion of production scale, in the process of the production and material handling cost has had a huge impact on the profit, to promote more and more used in the production of large enterprises, efficient, automated material handling machinery. Along with the material handling equipment manufacturing enterprises in the international market competition ability, and stable and continuous development of economic construction in developing countries the market need, the world market for material handling machinery in our country's overall demand will continue to increase.
- Q: Material handling system in the factory
- The machinery factory's internal logistics system involves the production plan, process flow, moving operation, warehouse management, information system and so on.
- Q: What is the relevant content of the flow of materials, storage and usage
- Give you the information below, don't know if it works for you? Try it. Logistics refers to the physical flow of raw materials, products, semi-finished products and finished products within the enterprise. Used for example in the process of production, the production of raw materials, fuel, and purchased components into production, after go through the materials, materials development, to the various processing centers or store point, form, in products from one location to another production location, in accordance with the relevant provisions of the technological process for processing, storage, with the aid of certain method, flow between the Labour, Labour, has been to the finished product, always reflect material in the form of physical flow process, thus constitute the whole process of the enterprise internal logistics activities. Below we in production logistics, for example, for production logistics are generally has a complicated structure, fast logistics, logistics route complex, large volume, high real-time requirements, etc. In order to adapt to the requirement of the modernization of production and green manufacturing, in addition to the production logistics system including the storage and handling system, distribution system plan and implementation system, logistics information system and logistics control system, it should also include the reverse logistics system.
- Q: What is the carrying equipment of the container cargo
- Shockproof and vacuum packaging, equipment hoisting, lower layer, translation, adjustment level, container (container), import crane, forklift professional service.
- Q: There are three things to do when the material is stacked up and down
- Fire proof, waterproof and center of gravity
- Q: What are the requirements for the science of loading and unloading
- Mechanized the moving operation. Provide functions such as production, handling and storage. The various elements of the moving material should be considered when choosing the moving equipment, including the moving and method used. Standardize the type and size of the handling and handling equipment. Adopt methods and equipment that can be adapted to all kinds of work and applications, unless you have to use a special visual device.
Send your message to us
MANUAL STACKER Adjustable Forks Style- SJJA20E
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords