10X Surveillance High Speed PTZ Analog CCTV Camera Shockproof
40M IR Distance
Make use of 10x HD color zoom camera as module.
Rotate 360°in horizontal direction,driven by exact engine,operate stably with Precise position-setting.
The rotation speed can be adjustable according to the zoom rate of camera lens, auto-focus, auto white balance.
Built-in OSD. Several control protocols are compatible and Baud rate is adjustable;
Vertical 90°continuous monitoring after auto reversing 180°.
Model No .
Color to B/W, Color: 0.01Lux, B/W: 0.001Lux
Auto/manual, take high-performance DSP to realize complete digit and ultra-high speed focus function
4groups, each can record 200 actions
Total 30 presets can join cruise, can setting the presets' residence time
Support Horizontal scan, deuce area scan, scan random
Horizontal 360°unlimted rotation, Vertical 90°,auto reversal
Horizontal & Vertical Min 0.01°,Max 30°/S
RS-485, PELCO D, PELCO P
-20°C~+50°C(select temperature control accessories), <95%RH
- Q:What is the difference between a camera's double point and a single lamp point?
- The camera's double dot-in-the-spot light and single-digit array lamp is just a different number of infrared light popular name, there is an array of infrared light camera called single lamp array, two is called double lamp array.
- Q:How does the surveillance camera solve the backlight problem?
- Monitor the camera when installed properly, the exact location of the installation is not properly, in the monitoring screen may appear backlight phenomenon, which is installed monitoring often encountered problems. Especially in the entrance to install the surveillance camera is more prone to this problem, aimed at this problem, in fact, has not yet fully found a very effective way, the following Xiaobian introduced three ways to improve the backlight appearance must have a role, everyone In the use of the process of induction on-site environment and many other conditions to think, and then seek the best disposal approach.
- Q:Monitor the camera gray screen
- 1, power reasons. The basic can rule out this reason, because it has been running for 2 months. If you do not worry about the power, you can do this: remove the camera, change the new power (or now use a normal) next to the host test. (Because the output line of the power cord is too long, there may be insufficient voltage.)
- Q:How to remotely monitor the phone
- You must first understand the video camera brand, different brands of video camera phone monitoring are not the same, open the DNS to provide the site, download and install a plug-in, video recorder Internet settings, in short, it is simple to say, do a lot of steps,
- Q:Monitor the camera to take pictures at regular intervals
- General monitoring plus small software, because the monitoring host has a manual capture function, so that small software can replace the hand.
- Q:How to monitor the camera with the venue, what type of camera installed in what kind of site, the camera installed how much the number of lenses should be equipped with light board.
- Monitoring camera should pay attention to the following: camera clarity, illumination, image storage time, etc., it is recommended to monitor the equipment franchise stores (generally every city computer city) asked clear.
- Q:How to choose to monitor the camera and video capture card?
- Monitoring system installation first determine the existing computer to install the monitoring card (this method is now rarely used), or embedded hard disk video recorder to do your monitoring host. Use the computer to install the monitoring card, suitable for familiar with the computer installation, a professional staff on duty, more functional requirements of the place. But the computer needs 24 hours to boot, and easy to crash in the virus or poor heat and other issues; the use of embedded hard disk video recorder does not require professional knowledge, do not need to keep, the operation is very simple, like the use of VCD as convenient;
- Q:A camera for an hour how much space
- Depends on your video recorder video format is CIF or D1
- Q:Monitor the camera feel infrared
- There are two kinds of camera lens: one is a CCD is a sense of the infrared are infrared (day and night type) lens and color lens sense of infrared lens
- Q:Network monitoring camera how to make external network access?
- Second, to use the network to monitor the camera's P2P function, in the camera where the computer log on to the camera manufacturers authorized transfer site, account application and verification, equipment to add; then you can log in the Internet where the site input account And password, view the video has been added to the device.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range