Q:Machining Center for Machining Stainless Steel What Material Milling Cutter

When milling stainless steel, extreme pressure emulsions or vulcanized cutting oils should be used.

Q:Farrah system processing center PS1016 no EOB alarm what it means

FANUC system keys used:

Q:Machining center with an end mill milling side of the surface when the collapse is caused by what causes.

the reason is generally because the knife hole and the end of the cutter between the outer diameter of the oil film, Lack of force caused by. Milling cutter factory is usually coated with anti-rust oil, if the use of non-water-soluble cutting oil cutting

Q:Which big god gets advice, cnc processing center g code g28g98g99 in the end what is the meaning. To be detailed. Have labor Thank you

91G30Z0 (Z axis back to the library 0 zero, the height of the knife, the point of some machines and machinery 0 points coincide)

Q:How to calculate the feed center feed speed

Feed speed also has two G94 F100 means a minute distance of 100 mm. The other is G95 F0.1 that the spindle per turn, the tool feed size of 0.1 mm. Selection of Cutter and Determination of Cutting Volume in NC Machining

Q:Shanghai area 4 800 or so processing center 20 hours a day operation, a year of gross profit in the number of how much ah

Shanghai processing center of the traditional machining die offer offer is generally 60-80 per hour

Q:How much is a small processing center?

In fact, you have to confirm the processing needs of your product, and then manufacturers can give a specific configuration and quotation, in general, the configuration of the grade, domestic small processing center, such as 320 this, the price does not exceed 100,000

Q:CNC machining center g51 how to use

(X, Y, Z) is the zoom center, the graph is enlarged to the original image P times; if omitted (X, Y, Z), then the program origin for the zoom center.

Q:CNC, machining center

CNC milling machine and CNC machining center is the difference between the milling machine tool is a single, can not automatically change the knife, only manual tool change.

Q:Machining center with twist drill bit cast iron speed how much feed how appropriate

The speed and feed are related to the size of the material and the borehole.