Q:What are the kinds of stuffing inside the security door?

The internal filling of the anti-theft door of the country must be made of aluminum silicate rock because of the need for silicon, Alkaline rock wool has a good insulation, fire and noise performance.

Q:Is the door and security door a door?

Unit doors are the doors of different units that each residential building belongs to. In short, that is, when you enter your own home, into the corridor when the door. Can be anti-theft door can not be anti-theft door. Anti-theft door of the full name of the touch whip Hezhuang Gu Biao collapse wave "anti-theft security door." It combines both anti-theft and safe performance. The cell door is defined from the door where the door is located, and the face-to-door is defined from the performance of the door

Q:The construction unit filled with wood, part of the plastic bags, cement bags only fill the `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` `` ` ?More

The number of specific requirements can not remember But you said 5-15cm is a bit big Oh can be said that the size of the hole to do the wrong

Q:Will the shutter gate and shutter doors have any difference, the general, the price is much more

Rolling shutter doors are generally used to do cloth or leather to do the soft curtain, roll gate is metal, aluminum and other electric devices with the door, but the basic difference

Q:How to remove the double-sided adhesive on the anti-theft door?

1, with soap plus a little ammonia and turpentine mixture, you can remove many dirt and make the glass surface more shiny (this article applies to tiles, ceramics, glass, etc.). 2, with a good sticky transparent glue repeatedly tear, you can remove some of the surface 3, with a little letter of sodium water on the wipe off, or paint thinner can also be used. 4, you can use hair dryer dry, and then gently scraping on a 5, with a cotton swab dipped in water to wipe. 6, wind oil fine wipe. 7, use a special cleaning agent or sports shoes to remove the cream wipe. 8, with the drawing with the 4b rubber is very soft that kind of Korean rubber can erase it. 9, if it is a long trace of traces have been hard, you can use the hot towel to get it soft and then try this should be removed, your home for the glass. Or first of all, we can use the nail polish to remove the light to clean the water to see, but because the light to the water is likely to make the original color of the wall also followed off, so it is recommended in the obvious small places try more insurance. Or, we can take a piece of vinegar covered with dry cloth, to cover the entire double-sided adhesive traces of the place, until the double-sided adhesive sticky stains completely wet, you can use the ruler easily removed. In addition, you can also use the heating method to double-sided adhesive glue softening: blowing with a hair dryer to soften the glue, when the double-sided adhesive adhesion becomes weak, you can easily remove. If there is a little traces, with the removal of nail polish to light water to wipe. Finally, in the clear time, whether it is to use to light water or vinegar, be sure to make these supplies completely wet double-sided adhesive marks, can be easily and effectively removed Oh! If the conditional alcohol + eraser effect is very good

Q:What method can be used to remove the anti-theft door on the small ad posted?

You can use the day to take water, also known as banana water.

Q:How to prevent the security door was prying

The world is anti-gentleman is not anti-villain, there is no door is not open

Q:Buy the security door of the precautions?

To gold point of the original anti-theft lock, then you can find me Q

Q:Anti-theft door inside the key to forget the pull, and outside how to do it?

I am a security door dealer this problem is more difficult, which plug the key, the key did not turn, there are key to the outside of the key to the right to cover the right to cover the effort to push back and forth, the inside of the key to launch a little can open, if inside Turn, and find the king of the door to destroy the door with a professional tool to open

Q:Anti-theft door of the cross key lock in the lock, and how quickly get out?

Prepare props: word, Phillips screwdriver, pliers 2, sewing needle 2, tweezers 1. The method is as follows: (1) the sewing needle with a fire red bend into a small hook-like, and then gently find the key to the place, found that the activities of the gap, to find a small pillar can be activities, in fact, the lock can lock , That is, a small bronze pillar can not be locked organs, and now with two needle hook off the key, slowly pulled out on the line. Can be used to help tweezers, if not, you can use a screwdriver to remove the position in the house to find the location of the key, with a needle stabbed out, and then took out. (2) the key to break the door in the lock, and first look at the key is not wrong, the correct location should be inserted into the key position. To find a medical tweezers try can not be taken out, if the tweezers could not, then find a bike gate wire in front of a small groove can try to hook out. (3) from the inside to remove the back cover of the lock, with a narrow iron bar or a little bit of wire, from the door inside the poke, you can cut off the key from the keyhole poke out. (4) If the above methods are no way to solve, then only to find a locksmith, and unlock the lockers are uncertain, only for a security door lock.