Heavy Duty Electric Stacker- CDD20M
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | | CDD20M |
Drive type | | electric |
Operation type | | standing |
Capacity | Q(kg) | 2000 |
Load centre distance | c(mm) | 500 |
Lowered fork height | h13(mm) | 90 |
Wheelbase | y(mm) | 1357 |
Tyres material | | polyurethane |
Height,mast lowered | h1(mm) | 2087/2337/2407/2507 |
Max. lift height | h3(mm) | 4500/5300/5500/5800 |
Height,mast extended | h4(mm) | 5055/5823/6033/6333 |
Overall length | l1(mm) | 1955 |
Length to face of forks | l2(mm) | 805 |
Overall width | b1(mm) | 1220.8-1630 |
Fork dimensions | s/e/l(mm) | 60/170/1070(1150) |
Distance between fork-arms | b5(mm) | 695 |
Aisle width for pallets 1000×1200 crossways | Ast(mm) | 2464 |
Aisle width for pallets 800×1200 lengthways | Ast(mm) | 2401 |
Turning radius | Wa(mm) | 1629 |
Travel speed,laden/unladen | Km/h | 4.5/5.6 |
Lift speed,laden/unladen | m/s | 0.09/0.11 |
Lowering speed,laden/unladen | m/s | 0.12/0.09 |
Service brake | | Electromagnetic |
Battery voltage,nominal capacity K5 | V/Ah | 24/275 |
Battery weight | kg | 268 |
Service weight (with battery) | kg | 1450/1630/1640/1655 |
--------
SAFETY AND PRODUCTIVITY:
• Emergency reversing device.
• Built-in pressure relief valve protects the trucks from overloads.
• Emergency power disconnect.
• Low speed switch in the handle.
• Stepless speed control.
• The rubber platform and safety guides increase operator safety and reduce fatigue, and they can be folded away when not in use.
STRUCTURAL:
• The side located cyliders provides operators a wide view and ensures structural stability.
• Spring-loaded castors improve lateral stability on uneven floors and enhance truck performance and service life.
• Imported steel for the mast from Germany.
• Supporting legs.
SERVICEABILITY:
• Low battery protection setting prolongs the battery use time.
• CANbus technology reduces wiring complexity and increases reliability.
Remarks:
Heavy duty type Stacker, the full free lifting is only avaiable for lift from 4.5m to 5.8m.
- Q:Urgent, please go to logistics expert, the question about the warehouse
- Can put the goods of a few higher. Our company is such a place, a lot more than before, and also not easy be affected with damp be affected with damp. Totally can use this way.
- Q:What is the relevant content of the flow of materials, storage and usage
- Give you the information below, don't know if it works for you? Try it. Logistics refers to the physical flow of raw materials, products, semi-finished products and finished products within the enterprise. Used for example in the process of production, the production of raw materials, fuel, and purchased components into production, after go through the materials, materials development, to the various processing centers or store point, form, in products from one location to another production location, in accordance with the relevant provisions of the technological process for processing, storage, with the aid of certain method, flow between the Labour, Labour, has been to the finished product, always reflect material in the form of physical flow process, thus constitute the whole process of the enterprise internal logistics activities. Below we in production logistics, for example, for production logistics are generally has a complicated structure, fast logistics, logistics route complex, large volume, high real-time requirements, etc. In order to adapt to the requirement of the modernization of production and green manufacturing, in addition to the production logistics system including the storage and handling system, distribution system plan and implementation system, logistics information system and logistics control system, it should also include the reverse logistics system.
- Q:What are the potential defects of the automated material handling system?
- Stacker crane Automatic stacker crane is a machine, electrical integration of high-tech products, products mainly to the (box, bag, barrel), through a continuous mechanical action, according to certain order stack to the corresponding empty tray, to facilitate the batch product handling and transportation, so as to improve the efficiency of the production. According to the height of the entry, different stacker machine is divided into high and low stack.
- Q:What is the rational and scientific classification of logistics facilities and equipment
- Facilities: like warehouses, roads, public parking lots and so on. Equipment: vehicles, pallets, forklifts, RF scanners, GPS locators, and so on. Large and long-term use and investment, not easy to move and sell are facilities.
- Q:Why should we emphasize unitization and standardization in material handling
- The logistics module is the dimension of the logistics facilities and equipment. The logistics module is for the rationalization and standardization of logistics, the standard scale of various factor dimensions of the logistics system. It is composed of various factors in the logistics system of, these factors include: the group, group the goods loading and unloading machinery, transportation machinery and equipment trucks, trucks, container and transport facilities, machinery and equipment for the cargo storage, etc.
- Q:Talk about how to cut the cost of moving materials.
- There is limited room for human efficiency.I hope my answer will help you
- Q:What is the proof of working in mechanical design?
- Don't waste your time in school textual research, the engineering drawing, mechanical principle, mechanical design, such as professional course learning, course design, graduation design with a good, better than nothing; Of course, there are some foreign investment that is required for the level 4, and there are exceptions. You design it well, and English doesn't matter.
- Q:What is the carrying equipment of the container cargo
- Shockproof and vacuum packaging, equipment hoisting, lower layer, translation, adjustment level, container (container), import crane, forklift professional service.
- Q:The material needs to be transported, it is easy to produce dust.
- Subjective condition: to the extent that the transport effect is required, such as completely insulating the dust or trying to suppress the dust. What is the company's budget
- Q:What are the requirements for the science of loading and unloading
- Use material handling activities to improve control of production, inventory and order processing. Use the transport equipment to improve the production capacity. The cost of moving the unit to determine the performance of the transport. Provide appropriate means and equipment to enhance the handling safety.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Heavy Duty Electric Stacker- CDD20M
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords