GDQ-3KV-5N Glass Cloth Tape
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 20000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
CONSTRUCTION:
Backing: Glass Cloth
Adhesive: Adhesive with silicon
TYPICAL PHYSICAL PROPERTIES:
Thickness(adhesives+cloth): 0.18-0.2mm
Width: 3-500mm
Length: 30m
T180° PeelAdhesion to steel: ≥5 N/25mm
Elongation: ≥4.5%
Temperatureresistance: 80-260 oC
Temperatureresistance grade: H
Voltage: 3kv
PACKING:
Core I.D.: 3” (76mm±1)
Jumbo Roll：500mm x 30m
Packaging：Wrapped with corrugated cardboard.
REMARKS:
1. The data above are typical results and subject to change withoutnotice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & LogRoll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be storedat room temperature and be kept away wet and/or heat source.
4. It is essential, as with allpressure-sensitive tapes, that the surface to which the tape is applied must beclean, dry, and free of grease and oil.
5. The users should take test anddo trial-application on the above products before coming into application so asto witness and ensure suitability for their special purpose and technique.
- Q: What is the cause of the bursting of rubber products and how should they be improved?
- There are five reasons for the bursting of rubber products: 1. forming temperature is too high, or the temperature of the upper and lower template is inconsistent. 2. the exhaust line is too open or exhaust time is too late. 3., the material quickly cooked. 4., the mold structure is irrational, there is no running trough. 5., down weight, overweight.
- Q: Why does rubber burn black smoke?
- Synthetic rubber inside will be artificially adding carbon black, to reinforce and improve the wear resistance and reduce the cost. For example, many synthetic rubber: butadiene rubber, chloroprene rubber, styrene butadiene rubber must be reinforced in order to achieve the use of carbon black, tensile strength, elongation and wear ideal.
- Q: Rubber rolling process for making rubber products
- The rolling process has become a rolling process.The principle of rolling process: using pressure between the calender roller, the material plastic flow deformation, the final film made with the size and geometry of the provisions of section a section, or the rubber covering process in textile or fabric made of metal surface has a certain thickness of the tape section.
- Q: How to make white rubber products do not yellow or delay yellowing time?
- Then aging is divided into thermal aging, oxygen aging, ozone (electrostatic belongs to ozone, because static electricity produces ozone). Gas corrosion aging, heavy metals, oxidation aging. Reaction aging. UV aging and so on.
- Q: How to remove the rubber front?
- The other is the freeze trimming method. Is a use of ultra low temperature makes the rubber and plastics flash rapid embrittlement of liquid nitrogen, and in this state, the flash frozen particles of high-speed jet impact products (fash), which not only can flash with high quality and high efficiency removal of rubber products (fash) and keep the special trimming equipment of all plastic products itself does not change. D shell Ba Quan?? especially in Japan, in the basic use of frozen trimming.
- Q: Rubber products labeled Huai gum can improve wear?
- In accordance with the requirements of the inquiry, the tire carbon black is a special production, usually oil to produce, mainly in the heavy oil products, coal, coal tar and other raw materials as a result of incomplete combustion
- Q: How do ordinary NBR and EPDM materials differ?
- Nitrile rubber (NBR) is composed of butadiene and acrylonitrile was prepared by emulsion polymerization, nitrile rubber by emulsion polymerization at low temperature, excellent oil resistance, high wear resistance, good heat resistance, strong adhesion. Its disadvantages are low temperature resistance, poor ozone resistance, poor insulation properties, and slightly lower elasticity. Nitrile rubber is mainly used in the manufacture of oil resistant rubber products.
- Q: Why do rubber products become so long that they seem to melt and become sticky on the surface?
- If the solvent is tacky, the reason why the rubber is not involved in the crosslinking is dissolved. Rubber products are generally crosslinked, and the crosslinked part is the main part of rubber. It only swells and dissolves under the action of solvent. If this is the case, it will not stick when the solvent is dry.
- Q: What is the harm of rubber to the human body?
- In use, some contact with the human body rubber requirements are very high, from the choice of gum species (usually silicone rubber and PU), to the use of mixing agents, have strict requirements.
- Q: Which kind of rubber has the best wear resistance?
- Ding Qing rubber (nitrile, butadiene, rubber)It's also called NBR.Butadiene and acrylonitrile are obtained by emulsion polymerization. NBR is mainly produced by low temperature emulsion polymerization. It has excellent oil resistance, high wear resistance, good heat resistance and strong adhesive force. Its disadvantages are poor resistance to low temperature, poor ozone resistance, poor electrical properties, and slightly lower elasticity.
Send your message to us
GDQ-3KV-5N Glass Cloth Tape
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 20000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
