Gate Valve Non-rising Stem with Best Price and High Quality from China

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 pc
Supply Capability:
10000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 1.Structure of Gate Valve Description

A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed.When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss. 

2. Main Features of the Gate Valve

• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber

•  Free of water pollution

• High manufacturing accuracy

• High strength

• Environmental protection and energy saving

• Good visual effect

 3. Images

 

Gate Valve Non-rising Stem with Best Price and High Quality from China

Gate Valve Non-rising Stem with Best Price and High Quality from China

4. Gate valve Specification

Gate Valve Non-rising Stem with Best Price and High Quality from China

Gate Valve Non-rising Stem with Best Price and High Quality from China

 5.FAQ

1. What's are the characteristics of gate valve?

The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. 

2. What is the work principle of gate valve

 The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. 

3.  What is the structure?

Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Fire protection gate valve from the wall how many distance there is no regulation?
1 meters away from the wall, leaving the maintenance and replacement distance
Q:Gate valve is gate valve, gate valve specifications, model code is generally what?
Valve lock valve and gate valve. According to the code, the domestic valve type standard, valve type valve is composed of valve type, drive mode, valve connection, valve structure, sealing material, body material code to said gate type code Z.Gate valve: gate valve is one of the most commonly used shut-off valve, mainly used to connect or cut off the pipeline medium, not used to regulate the flow of media. A wide range of pressure, temperature and diameter is used, especially for medium and large diameter pipes.1, the main characteristics of gate valve(1) fluid resistance is small. The through hole of the gate body is straight through, and the flow direction of the medium does not change when flowing through the medium, so the flow resistance is smaller.(2) opening and closing is more labor-saving. When opening and closing, the direction of valve plate movement is perpendicular to the direction of flow of medium. Compared with the opening and closing more effort.(3) medium flow direction is generally unrestricted. The medium can flow in any direction from both sides and can achieve the purpose of switching on or cutting off. Easy to install, used in the flow direction of the medium may change in the pipeline.
Q:What is the difference between an elastic gate valve and a rigid gate?
Brief introduction: the valve gate valve is a gate opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. Gate has two sealing surface, the most commonly used mode gate valve of the two sealing surface to form a wedge, wedge angle with valve parameters vary, usually 50, medium temperature is not high when 2 degrees 52'.Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate.
Q:What are the meaning of the cast rigid gate valves z41h-16c?
According to the provisions of the JB/T 308-2004 valve type programming method:Z== gate valve4== flange connection1== rigid single gateH== sealing surface material: Cr13 stainless steel16== pressure rating: 1.6MPaC== body material: carbon steel
Q:What is the meaning of socket welding gate valve A105, D&S:STLT, STEM:13Cr, CL800, SW, AP1602, BB-BG-OS&Y?
Body material: A105Sealing surface material: STLStem material: 13CrPressure rating: CL800Connection: SWImplementation criteria: AP1602BB-BG-OS&Y: plain rod support, bolt connection, flange valve cap.
Q:What's the difference between the knife gate valve and the stop valve?
Minor force needed for opening and closing.Medium flow is unrestricted.When opening fully, the sealing surface is eroded by the working medium smaller than the cut-off valve.The shape is relatively simple and the casting process is better.The valve is used in the system is relatively large, to close the gate off system; and the valve is used in the system is relatively small, and to adjust the flow quantity of the system, can not be closed gate and globe valves of different specifications for many kinds of occasions, the valve rod valve the dark bar gate valve, wedge gate valve, single valve, multi valve valve body structure is different, large volume.
Q:What gate valve is the J41H-150LBDN100 gate valve?
J41H-150LBDN100 is not a gate valve, it is a API stop valve.API valve can only medium one-way flow direction when installing. Its structure length is larger than gate valve, and the fluid resistance is large. The reliability of sealing is not strong in long-term operation.Also called cut-off gate valve is the most widely used as a valve, it is popular is because the process of opening and closing the sealing surface friction between the small, more durable, highly open small, easy manufacture, convenient maintenance, not only for low pressure, but also suitable for high pressure.
Q:What does the gate valve 150# mean?
150Lb (American Standard pressure value corresponding to the PN2.0)
Q:What is an inverted seal gate valve?
When the inverted sealing gate valve is fully opened, the sealing of the sealing is brought together, and the sealing effect is reduced, and the erosion of the filling to the fluid is reduced, and the service life of the filler is prolonged, and the possibility of leakage is reduced. Generally on the gate valve, stop valve has inverted sealing requirements.
Q:What is gate well?
Gate valve well: it is a irrigation network system which aims at improving water utilization and efficiency, aiming at the construction of water saving and high-efficiency agriculture as well as scientific and technological innovation as well as convenient operation and management.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range