G Series 2-3.5T I.C. Counterbalanced Forklift Trucks

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Model

CPCD20CPCD25CPCD30CPCD35CPQD20CPQD25CPQD30CPQD35

Power type

DieselGasoline/LPG

Load capacity

kg20002500300035002000250030003500

Load center

mm500500

Max. lifting height

mm30003000

Overall length(without forks)

mm25102580270027702510258027002770
Overall widthmm 11501150122512851150115012251285
Overall height(overhead guard)mm 21402140217021702140214021702170

Min. turning radius

mm21702240240024202170224024002420

Max. travel speed

(with/without load)

Km/h17/1917/1918/1919/1917/1917/1918/1919/19

Service weight

kg34803800440050003480380044005000

This new series forklift trucks that made with the latest technical design provide you excellent operating performance. HELI forklift trucks high standard performance, comfortable driving experience and the simple and safe operation will make your work handier.

Environmental Friendly

- The emission meets EC and EPA new regulation.

- High efficiency hydraulic system to lower the fuel consumption.

- Using environmental friendly material.

- Damping device on the mast to reduce impact and vibration.

- Sound insulating and absorbing device are used to reduce the noise.

Ergonomics design

- Using power braking system to reduce footplate strength.

- Control lever right located to effectively reduce drivers arm tiredness.

- Dual combined switch lever as a car to enable easy operating.

- Wide mast with good visibility.

- Wide space for boarding and driving , increasing leg space.

- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.

Safety performance

- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.

- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.

- Safety device in mast hydraulic system prevents material falling down in case of hose broken.

- High pressure hose is designed far away from the driver.

- Safety wire harness, using waterproof plug.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to check the driver's license?
You don't need a driver's license to learn forklift. Learn the forklift directly to the relevant department to take the exam. If you study forklift to get a job, you'd better get a forklift driver's license. There are places where you can hold a meeting and fork the goods. But the road could not be caught by the police. We have two people, we don't have a driver's license, we don't go to the forklift school, and the forklift is going very well. The technology of the forklift truck is not so good as the driver's license. It is only the fur that is learned in school, and the key is to practice more in practice. There are places where the technical requirements for forklifts are not very high, which is determined by the goods. In some places, the demand for forklift technology is high, because fork goods are harder to fork. But don't be afraid, just give you the opportunity to exercise, you will think about it, your technology will be great!
Q:The basics of driving a forklift
When uninstalling, it is strictly forbidden to unload the plates, turn the pan or use "archery" to avoid damaging the fork. The strict execution of the "five non-fork" in the job: the center of load of the center of mass of the cargo over the fork. A single fork is not a fork when it is carried; Cargo stacking without a fork; A fork may damage the cargo without a fork. Exceed the nominal load of the forklift or the quality of the cargo. When the goods are easily broken, valuables or loaded with unstable goods, or when the goods exceed the height of the portal, the safety ropes shall be bound and the special persons shall be guided when necessary. When two forklifts unload the same cargo at the same time, they should be in contact. When taking the goods at the platform, the fork can only be taken from the platform. There should be some safety precautions when crossing the cross.
Q:What about the exhaust fumes of the internal combustion fork in the workshop
A forklift exhaust gas purifier. Shanghai jiekai supplies imported forklift exhaust gas purifiers, which is 90 percent efficient.
Q:What are some of the common failures of forklifts?
First, if the generator is normal, if the generator is normal then it is the problem of the battery. The most stupid way to measure the virtual voltage of a direct battery is to charge the battery with a charger, and if it can't be plugged directly, the battery will be dead. Change generators or batteries. When you turn on the key switch, you turn on the key switch and start clicking. Change the starter 3, if the key switch is bad, start with a little bit of reaction fluid. In the key switch 4, the oil pump is not supplied with oil and this needs to be removed and sprayed. In exchange for oil pump or repair. There is no oil in the tank. Come on! There is no oil measuring tape. Add oil! 7 and 8, twist the key switch, and the motivation is normal, but you can't afford a car, or get up and stall. Repair engine!
Q:What is the responsibility of the forklift driver for the job?
Legal basis: 1) "tort liability law" article 34 the employer's personnel for task execution causes damage to others, by unit of choose and employ persons assume tort liability. In the period of labor dispatch, the dispatched staff shall be responsible for the infringement of the persons who have caused the injury to other people because of the performance of the work. If the dispatching unit is at fault, it shall bear the corresponding supplementary responsibility. 2) the tort liability law article 35 a labor relationship formed between individuals, providing labor services side because Labour causes damage to others, by the accept labor party bear tort liability. Where the provision of a labor party is compromised by the labor service itself, the corresponding liability shall be borne according to the respective fault of the two parties.
Q:How many kilograms are on the top of the forklift truck
For example, a three-ton forklift truck can withstand the impact of six tons of cargo.
Q:How can the forklift truck change the antifreeze fluid and find no drainage
Open the drain and release the old antifreeze and then install the water pipe
Q:Is the forklift card issued by the labor bureau or the bureau of quality supervision? Which good?
Forklift license has two kinds: 1. Grade card is issued by the labor bureau skills (primary, intermediate, advanced) the certificate of cover different grade card is different color, green, primary, intermediate and senior red, blue. Such certificates may be subsidized by the title of office; The certificate of special operations issued by the bureau of quality supervision is the same as that of green skin, which can be used for forklift operation. The more important.
Q:What is the section 4 and 3
The certificate of operation certificate and technical grade of forklift truck is issued by the bureau of quality and technical supervision, human resources and social security bureau.
Q:What is the principle and function of the forklift differential
Forklift differential role: the main is the torque transmission shaft, allowing the rotation of the two and a half shaft is not uniform, in order to satisfy the requirement of the range around the wheel torque rotation. The forklift differential is composed of forklift parts, forklift gear, forklift truck, forklift truck and forklift driving gear.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range