Q:How does the CNC lathe front knife and rear turret programming differ

When the front tool spindle is facing forward, the tool nose is facing upwards and the tool nose is facing down.

Q:How does the machining accuracy of the lathe

3, shape tolerance: generally with a specific symbol + digital way to represent.

Q:Is the lathe promising?

This thing for decades has been an irreplaceable machine, the next few decades can not be changed.

Q:What is the cause of a round trip in a CNC lathe?

Chuck installation accuracy is poor, the use of a long time to reduce the accuracy of the claw;

Q:CNC lathe G70 G71

The back of the numbers can give their own, but with the G71 inside the same block

Q:Ordinary lathe spindle head type D8 and A28 What does it mean?

A2 type because the machine and the spindle part of the outer ring thread connection, so the strength is better than A1, but the internal structure of the chuck, in addition to a small part of the optional, most can only use the A1 type with the machine spindle end

Q:Automatic lathe principle

In the lathe can also be used drill, reaming drill, reamer, tap, die and knurling tools such as the corresponding processing.

Q:Ordinary lathe, a little card in the pallets

Adjust the side also need to shake back and forth in the palm of the hand side of the adjustment, while observing the dial, the hands feel "neutral" for 3 to 4 small grid is appropriate.

Q:How the first lathe is made in China

At first, people use two stands as a stent, set up to cut the wood, the use of branches of the elastic force to the rope rolled to the wood, pulling the rope to turn the wood, with the tool turning.

Q:Please describe the composition and function of the C6150 lathe

its main task is to rotate the main motor through a series of transmission mechanism to make the required spindle to the two different steering speed, while the spindle box part of the power Pass the movement to the feed box. The spindle spindle is the key part of the lathe