Q:How to start a forklift? Say detailed point

Do not drive when the fork is raised: when the fork rises, do not drive the forklift truck, in case the goods are depraved. Do not drive on the side of the road: make sure the forklift has sufficient safety distance from the side of the road or platform to prevent the forklift from falling. Forklift maintenance: the forklift truck is not allowed to be modified, and the daily inspection and repair of the forklift is not allowed. When the forklift has any damage or failure, the forklift truck is stopped to be repaired; The forklift truck cannot operate a forklift truck until it is overhauled. When checking the electrical system, turn off the key switch and pull out the battery plug. When adding fuel, the driver should not be in the car, and the engine will be out of the fire. When checking the battery level of the battery or tank, don't fire the ignition. Avoid sudden start, quick start, sharp turn and sudden shift of direction, and stop the sudden acceleration. You should always do a forklift based on your surroundings. The control handle is not allowed to be controlled all of a sudden: the hydraulic control handle must be operated slowly, either in full load or in empty load. When a cargo fork is at a high point, a sudden manipulation of the handle can cause the risk of deterioration of the goods or the tipping of the forklift. Don't rush to the shelves. When the door is tilted forward, the shelf is forbidden to rise: when lifting a cargo or starting a forklift, the door frame should be put in place to stabilize the goods. Under fork condition, the door should not be tilted forward. When lifting or lifting the goods, they should stop first. When the forklift is tilted, do not unload the cargo.

Q:How long is a forklift train

In guangzhou, the training of forklift is followed by an hour per person per day per day.

Q:The basics of driving a forklift

Note the position of the gearshift and the reverse pole. The speed of the forklift truck is slow, usually only one and two blocks, and a reverse gear is specially set up. When driving, first hang in the reverse gear, switch the forklift to move forward or back, then push the shift lever to 1 stop and start smoothly. The forklift does not stop changing direction, causing damage to the transmission.

Q:What should 80V force forklift voltage current be?

Container forklift The engine is powered by diesel engine, carrying capacity of 8.0 ~ 45.0 tons, which is divided into empty box, heavy box and container. Apply to container handling such as container yard or port terminal

Q:There are several possibilities for a forklift battery bomb

There are several reasons for the battery explosion, first of all, the battery is caused by a normal internal short-circuit.

Q:What is the responsibility of the forklift driver for the job?

If the driver of a forklift truck is employed, the unit shall be liable for compensation. If the driver of a forklift is employed by an individual, the employer shall bear the liability for compensation. The two sides may negotiate a compensation dispute in advance and fail to bring a suit to the court.

Q:The forklift has no oil. How can you put it on when you have refueling

I don't know. You can read it on the Internet.I hope my answer will help you

Q:What do you need for a forklift?

2, to accurately and vehicle loading and unloading operation, in and out of the car door (library) is very frequent, reverse also many, steering, don't touch the car door (library), don't have to be back again, for safety in production, improve working efficiency. If the fork is not right, it may break the cargo and even push the goods down. Even if there is no consequence, at least you need to reverse your car and adjust the height, direction and inclination of the fork. Refork, lengthening the working hours

Q:What is the difference between a forklift and a forklift?

A forklift is used to carry loose and solid goods, usually with building materials, such as gravel, sand, etc. Forklift truck is mainly used for packing good or single bulk goods such as containers, cargo wooden cases, etc.

Q:The forklift card has been tried for several years

First before take an examination of forklift license to drive a forklift, through formal training institutions for training, and reported by the training institutions materials by the municipal bureau of safety personnel assessment of drivers, can be obtained by theoretical and practical operation test forklift license.