Concrete Pump Truck-Mounted Sy5190thb25
Certification:ISO9001: 2000, CE
Capacity of Fuel Tank:400 L
Minimum Unfolding Reach Length:6.4m
|Total weight||18900kg(41667 lbs)|
|Boom &Outrigger Specification||Vertical reach||25.0m(82′)|
|Minimum unfolding reach Length||6.4m(20′12″)|
|Pumping System Specification||Slewing circle||365°|
|Outrigger spread L-R (front) ||5200mm(17′1″)|
|Outrigger spread L-R (rear) ||2240mm(7′4″)|
|Output||Low pressure||100 m 3 /h(131 yd 3 /h)|
|High pressure||60 m 3 /h(78 yd 3 /h)|
|Pressure||Low pressure||8 Mpa(1160 psi)|
|High pressure||16 Mpa(2320 psi)|
|Max. strokes||Low pressure||30 times/min|
|High pressure||16 times/min|
|Delivery cylinder diameter||200mm(8″)|
|Hydraulic system||Open loop|
|Hydraulic system oil pressure||32 Mpa(4640 psi)|
|Water tank capacity||600 L(158 gal)|
|End hose length||3m(9′10″)|
|End hose diameter||125mm(5″)|
|Chassis specifications||Chassis model||SYM1160-01|
|Engine type||HINO P11C-UH|
|Capacity of fuel tank ||Euro III|
|Displacement||400 L(106 gal)|
- Q:What kind of driver's license does the concrete pump need?
- According to the "People's Republic of China Road Traffic Safety Law" Chapter II, Article XI: driving motor vehicles on the road, should be hanging motor vehicle number plate, placed inspection signs, insurance signs, and the vehicle to carry motor vehicle driving permit.
- Q:How high concrete pouring concrete pump can be poured how high？
- The longer the arm of the car pump, the more it needs to pass the road, stop the pump position is greater, so there are many sites can not use more than 60 meters of the pump (usually 60 meters of the car pump, the pump and the legs of the position width
- Q:How to wash the concrete pump with a ball
- Used for large concrete projects such as concrete transport work.
- Q:Why concrete pump down to play always block the tube
- In addition to pay attention to pipeline laying, there are also in the concrete pouring process should also pay attention to a certain amount of concrete slump can not be too large, 120-140mm on it
- Q:What are the drawbacks of concrete pump gate valve and S pipe valve?
- In addition to the use of gate valve delivery, but also requires the vertical transport pipeline in front of the installation of a horizontal transmission pipe section, the length of concrete lifting height of 1 /
- Q:What factors will be taken into account when selecting the pump chassis?
- As the pump work strength, for the chassis durability and intact rate requirements are very high, once the chassis failure, brought about not only the maintenance costs, the user's economic benefits will be seriously affected;
- Q:How to achieve the concrete pump pendulum for the change?
- 3. Proximity switch or stroke switch is a commutation signal to the pendulum, swing swing in place, from the pendulum to the main cylinder a commutation signal.
- Q:How much concrete can the concrete pump deliver for one hour
- Is a use of pressure, the concrete along the pipeline continuous transport of machinery, mainly used in housing construction, bridges and tunnel construction.
- Q:What is the method of washing the concrete pump?
- If the cutting ring and eye plate wear is not serious, cutting ring and eye plate spacing <0.1mm, and no more than 1mm between the groove scratches, available direct water method.
- Q:What is the maintenance method of concrete pump?
- 2) Before the operation should be checked to confirm the electrical equipment and instruments normal, the various parts of the switch button, the handle are in the correct position, the mechanical part of the fastening point of solid, reliable, chain and belt tightness to meet the requirements of the transmission parts of the normal operation.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range