Q:What are the common standards for gate valves?

Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. The following common standards for Fujian Biaoguang valve for valve: design specification: JB/T 7746, API602 JB/T 7746, the length of the structure specification / thread socket factory test and inspection of JB/T1751/GB7306, ANSI: B16.11/B2.1: JB/T 9092, API598 pressure temperature: GB/T 9131, ANSI B16.34, MSS GB/T 12220 product ID: SP25 delivery specification: JB/T 7928

Q:What kind of gate valve is Z6CS-H102?

Z== valve type: gate valve6== pressure rating: 800LB, API602C== structure: bolt connection, valve cover, bolt connection gland, bright rod support typeS== connection form: socket welding, that is, SWH1== body material: A10502== inner material: seat sealing surface STL, gate sealing surface STL, valve stem 13Cr

Q:What is the difference between the model z81x-16q and z81x-16c of the groove gate valve?

Not 16qIs 16p, the former body is stainless steel, and the latter body is carbon steel

Q:Analysis of the advantages of elastic seat sealing gate valve?

Most of the valve is forced seal, that is, when the valve closed, to rely on external force to force the gate to the seat, in order to ensure the sealing surface sealing.When opening the gate valve, when the gate lift height is equal to 1:1 times of the gate diameter, the passage of the fluid is completely unblocked, but at run time, this position is unable to monitor. In actual use, the top of the stem is used as a sign, i.e., the open position, as its fully open position. Temperature changes appear to consider locking phenomenon, usually open to the vertex position, and then rewind 1/2-1 circle, as a fully open valve position. Therefore, the opening position of the gate valve is determined by the position of the gate (i.e. the stroke). The sealing surface is easy to wear and tear, affecting the service life. When opening and closing, gate and valve seat two sealing surface friction, sliding, to medium pressure under the action of easy to produce abrasions, wear, affect sealing performance, shorten service life.

Q:What are the working principles of the electric gate valve?

You see what type of electric valve, is integral or ordinary type, if the overall type Denso took power on the line, is generally 380V and 220V power supply, and then according to their own needs and then open the signal line, in place and closing in place and remote control line, valve position feedback signal 4~20ma over torque protection, fault signal. Ordinary type electric valve should be equipped with the control box, the motor is the true story and the inversion, and in general to a trip signal signal is normally open and normally closed, closed in place are normally open and normally closed two points according to their own needs wiring, three lines and then open and close control of the line of control there are also 4 lines to control some manufacturers, as well as the valve position, some three lines connected with the potentiometer, some installed valve position transmitter is connected with two lines, and over torque protection fault signal.

Q:About fire valve is gate valve or butterfly valve problems?

Disease is generally in accordance with the design requirements, regardless of the butterfly or tie hair to meet the requirements, are two-way valve.

Q:What are the standards for the execution of cast iron dark pole gate valves?

Four, summary:1, cast iron gate valve is mainly used as a connection and cut off the role of medium. The opening and closing parts of the valve are ram, and the direction of movement of the gate is perpendicular to the direction of flow of the medium. Cast iron gate valve with ductile iron as the main material, the weight is very light, only about 20%~30% of the traditional gate valve;2, cast iron hidden rod gate valve belongs to the class of products, but also the successor to the traditional gate valve, the use of gate generated by the deformation of the compensation role, so that the valve to achieve good sealing effect. Cast iron dark rod valve with open and close the advantages of convenient, reliable sealing, good elastic memory, long service life, can be widely used in metallurgy, electricity, sewage, medicine, construction, food, textile, tap water, energy and other pipeline regulation and closure devices as.

Q:Why does the fire hydrant box in the air defense area need to be added with gate valves?

3, protective valve should be used for stainless steel or copper gate valve or cut-off valve;4, air defense enclosure structure, the distance from the proximal end of the valve should not be greater than 200mm. Valve should have obvious signs of opening and closing.

Q:What is the difference between the copper gate valve and the ordinary material gate valve?!

The material of general gate valve is cast iron, and the copper gate valve should be used in special requirement.

Q:Why the valve can only be fully open and fully closed valve can adjust the flow?

You said the cut-off valve is that the spool is rotating rather than vertical movement structure?Theoretically, the flow regulation can be realized by controlling the position (angle or distance), and all of them have mature products.