Decorative Mineral Fiber Ceiling Board 595x595x12mm

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

1,Structure of （Mineral Fiber Ceiling ） Description

mineral fiber board with CE CERTIFICATE
1professional manufacture
2.ISO9001,ISO14001,CE

2,Main Features of the （Mineral Fiber Ceiling ）

Material	Wet Formed mineral fiber
Surface	Factory Applied Vinyl Latex Paint
Noise reduction coefficient	NRC 0.4-0.6 depending on the surface patterns
Humidity Resistance(RH)	>=80%
Light reflectivity	>=85%
Fire Performance	non-combustible,reach class A according to GB8624-1999
Moisture resistant	conform to the quality requirements of standard board(12mm,14mm) according to JC/T670-2005
Environmental protection	no asbestos,formaldehyde content<0.1mg/L
Acoustical performance	comply with the requirements of JC/T670-2005
Colour	white
Density	280-320kgs/m3
Dimension	300x600mm, 300 x 1200mm, 600x600mm, 600x1200mm etc
Edge finish	square edge, tegular edge, adhesive and nails edge, concealed edge, shiplap edge, and liner shiplap edge.
Thickness	12mm, 14mm, 15mm, 16mm,18mm, 20mm etc.
Product Feature	Sound absorbing,Resistance to fire, warm-keeping, energy-saving, heat-insulating
Pattern	Pine holes,Little-Stars,Lovely-Worms,Sand Surface,and other special designs
Other	Mold resistance No AsbestosNo Formaldehyde

3,（Mineral Fiber Ceiling ） Images

Ceiling Tiles 595*595*12m Mineral Fiber Ceiling

4,（Mineral Fiber Ceiling ） Specification

5,FAQ of （Mineral Fiber Ceiling ）

Fire performance:non-combustible,reach class A according to GB8624-1999.
Moisture resistant: conform to the quality requirements of standard board(12mm,14mm)according to JC/T670-2005.
Enviromental portection:no asbestos,formaldehyde content<0.1mg/L
No rediation, conform to the requirements of GB6566-2001 for Class Amaterials
Acoustical performance:comply with the requirements of JC/T670-2005

4. key performance

Q: Bedroom top sound insulation trim panel: Will be multi-Mao composite sound insulation board with self-tapping screws fixed to the keel, the use of sealant for the failure to protect the patch.

Q: Are there any toxic ingredients in the plastic decorative panels: Ingredients are mainly unsaturated polyester and mineral powder (calcium carbonate) and some pigments and the like, most of the pigments containing heavy metals, generally non-toxic

Q: What is the decorative plate for the top of the elevator car?: At present, the market is still the most used stainless steel, but in recent years there have been glass products, plastic products, composite board products, and even with marble, copper, aluminum and other special materials, when some car material or style is more special You can use these special materials supporting the product

Q: How is the interior trim of the car door?: Tools: flat screwdriver, 8 socket wrench step: 1, with a flat screwdriver down to pry open the door handle lower trim, from the middle down and then pull out (the back door is the pry half of the front) 2, remove the handle under the veneer can be seen after the internal two black eight hex bolts, with a socket wrench down 3, unplug the window lift switch plug (which has a clip, use your fingers from the back hook to pull out) 4, with a flat screwdriver from front to back pry open the door handle trim panels, remove the door when the handle 5, hand the door trim below the mouth a little open a gap, and then put a wrench into the pry, that the interior board is a plastic card with a plastic card buckle on the door, the pry when the time to use a little effort, One by one pry. If you want to wrench the plastic interior trim bad, you can use a little steel bars and the like, but not too thick, or can not reach into. 6, a lap card bamboo shoots all pry open, hold the door trim board can be removed from the bottom up

Q: Ordinary wood finishes decorative plate surface brushing after the fire can be used as B1 grade decorative materials use? B1 level of decorative materials testing and evaluation standards?: Bl grade material The following properties are met and the combustion performance is defined as B1. A) According to GB / T 8626 for testing, the combustion performance should meet the GB / T 8626 as specified by the indicators and does not allow burning drip The phenomenon of igniting filter paper; B) Tested according to GB / T 8625, the average remaining length of each specimen is ≥15cm (the remaining length of any specimen> 0cm) And the average flue gas temperature per test peak ≤ 200 ℃. C) tested according to GB / T 8627, the smoke density level (SDR) ≤ 75.

Q: Wall switch socket decorative plate: This decorative board should be every series of switches have, you currently use which switch? To buy matching decoration up pretty Oh

Q: What is the exterior composite panel?: The outer wall insulation composite decorative board is characterized by comprising a light insulation layer, the outer part of the light insulation layer is covered with an integral nose panel, and the light insulation layer and the decorative panel body of the nose panel are Side is provided with a slot for securing the fixing bar for fixing the wall

Q: Metal carved decorative board price how much: Metal carved decorative panels, but also metal carved insulation board, because of its variety, the price is different Oh

Q: What is the general thickness of the wall water decoration board?: Cement pressure plate common specifications for the 1220mm × 2440mm × 2.5-100mm, or 1200mm × 2400mm × 2.5-100mm. According to the density can be divided into low density, medium density, high density category. Cement pressure plate, also known as fiber cement pressure plate or cement fiber pressure plate, is a natural fiber and cement as raw material, by the pulp, forming, cutting, pressing, curing a new type of building plate. Is a new generation of "green" building materials, in the excellent moisture, fire performance based on the unique environmental protection features. Is based on siliceous and calcareous materials as the main substrate, with cellulose fiber reinforced materials, mixed with other auxiliary materials, through the copy forming, high pressure curing a new building materials. With light, high strength, waterproof, anti-corrosion, fire, large format, good processing, improve construction efficiency and so on.

Q: Uv imitation marble decorative plate belongs to what material: UV is a technology, not what material. Imitation marble is a kind of artificial manufacture of imitation of the floor class, if good, you can do without radiation.

Send your message to us

*Email

*TEL

*Quantity

*Unit