Solar Collector Water Heater With Copper Coil In Water Tank
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Non-Pressure Solar Water Heater:
Non-pressure Solar Heater is one of the most economical solar water heating device with pretty high efficiency at the same time. It consists of hot water storage tank, solar vacuum tubes with mouth plug in storage tank, and bracket supporting tank and tubes.When cold water in evacuated tubes is heated with solar irradiation, as the specific gravities of hot water and cold water are different, hotter water goes upward to storage tank and colder water goes downward to glass tubes. through this continuous circulation, the cold water in storage tank will be gradually heated till sunset.
Specialty:
1. High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
2. Heat collecting efficiency is at least 20% above common solar systems.
3. Work in all day and all season: no matter any corner of the world, this system can work well even -40℃ to avoid the tube freezing problem.
4. Reliability: No water following through the tube, so water scale can not generate and tube cracks could be avoided, the system still can keep working even with some damaged tubes.
5. It can connect with water tap and work automatically with pressure0.6Mpa, bring enjoyable washing experience.
6. Safety: P/T valve would release pressure and temperature to protect tank..
Technical Specification:
1. Outer tank material: SUS304 stainless steel or powder coated color steel
2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
3. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
4. Frame material: 1.2mm thickness stainless steel
5. Insulation material: 55mm thickness polyurethane
6. Suitable for mains pressure water(up to 8 bar/116psi)
7. Easy plug-in installation
8. Install the T/P valve on the pressurized tank
9. Seal material: Stabilized High Temperature Silicon
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 8 bar/116psi)
Easy plug-in installation
Install the T/P valve on the pressurized tank
Seal material: Stabilized High Temperature Silicon
19. Vacuum Tube | 20. Size (mm) | 21. Φ47*1500 / Φ58*1800 / Φ70*2100 | |||||
22. Tube (pcs) | 23. 10 / 12 / 15 / 18 / 20 / 22 / 24 / 30 / 36 / 42 | ||||||
24. Material | 25. Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
26. Coating | 27. Single-target AL-N/AL or Three-target AL/N-Cu-SS | ||||||
28. Water Tank | 29. Capacity | 30. 80L ~ 500L for hot water storage tank | |||||
31. Inner tank | 32. Food-grade stainless steel SUS304-2B / SUS316 | ||||||
33. Insulation | 34. High-density polyurethane foam with 70~80 hour heat preservation | ||||||
35. Tank shell | 36. Food-grade stainless steel SUS304-2B | ||||||
37. Bracket | 38. Shaped strong aluminum alloy structure adaptable for flat or slope roof | ||||||
39. Accessories | 40. Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
41. Auxiliary Devices | 42. Assistant tank, Intelligent controller, Electrical heater, Magnesium anodes | ||||||
43. Tilt Angle | 44. 25 ~ 50° | ||||||
45. Water Output | 46. 45 - 95°C | ||||||
47. Hail Resistance | 48. Φ25mm diameter | ||||||
49. Model Number | 50. Solar Vacuum Tube | 51. Tank 52. Liter | 53. System 54. Liter | 55. Container Loading Qty /sets | |||
56. Size /mm | 57. Qty /pcs | 58. 20GP | 59. 40GP | 60. 40HQ | |||
61. VNS-58SA12-100 | 62. Φ58*1800 | 63. 12 | 64. 100 | 65. 132 | 66. 58 | 67. 119 | 68. 140 |
69. VNS-58SA15-130 | 70. 15 | 71. 130 | 72. 170 | 73. 54 | 74. 108 | 75. 131 | |
76. VNS-58SA18-150 | 77. 18 | 78. 150 | 79. 198 | 80. 43 | 81. 86 | 82. 105 | |
83. VNS-58SA20-170 | 84. 20 | 85. 170 | 86. 223 | 87. 40 | 88. 80 | 89. 97 | |
VNS-58SA24-200 | 24 | 200 | 263 | 35 | 70 | 85 | |
VNS-58SA30-250 | 30 | 250 | 329 | 28 | 56 | 68 | |
VNS-58SA36-300 | 36 | 300 | 395 | 23 | 47 | 57 |
Products Show
Our Services
1. OEM service
2. Warranty: 5 years
3. Considerable after sale service
Color steel Compact pressure Thermal solar heater
FAQ:
1. What’s the delivery time?
10 days after receiving deposit.
2. How long is the warranty?
5 years for whole system, 1 year for accessory
3. What’s your production capacity?
6000sets/month
4. What’s the MOQ?
1 set.
5. What’s your payment term?
Container: 30% T/T in advance for deposit, 70% T/T before shipment for fist order.
70% T/T after seeing copy of B/L from second order
Sample: 100% T/T in advance
Other choices: L/C at sight.
6. What certifications do you have?
CE, SOLAR KEYMARK, SRCC and etc.
- Q:Are solar water heaters eligible for any government incentives or tax credits?
- Yes, solar water heaters are typically eligible for various government incentives and tax credits, as they promote renewable energy use and help reduce greenhouse gas emissions. These incentives and credits vary by country and region, so it's recommended to research the specific incentives available in your area.
- Q:Can a solar water heater be used with hard water?
- Yes, a solar water heater can be used with hard water. However, it is important to note that hard water may cause mineral deposits to build up over time, potentially reducing the efficiency and lifespan of the solar water heater. Regular maintenance and cleaning of the system can help mitigate these issues.
- Q:Can a solar water heater be used for large-scale water heating applications?
- Yes, a solar water heater can be used for large-scale water heating applications. With proper design and sizing, multiple solar collectors can be installed to meet the high demand for hot water in large-scale applications such as hotels, hospitals, or swimming pools. Additionally, the scalability of solar water heating systems allows for expansion and adaptation to accommodate the specific needs of different large-scale water heating applications.
- Q:Can a solar water heater be used in areas with high levels of lightning activity?
- Yes, a solar water heater can still be used in areas with high levels of lightning activity. However, it is important to take certain precautions to ensure the safety of the system and the surrounding area. One way to do this is by installing a lightning arrester or surge protector in the electrical circuit of the solar water heater. This will help divert any lightning strikes or power surges away from the system, protecting it from potential damage. Additionally, it is recommended to ground the solar water heater system properly and regularly inspect it for any signs of damage. By following these safety measures, a solar water heater can safely operate in areas with high levels of lightning activity.
- Q:Can a solar water heater be used with different types of water tanks?
- Yes, a solar water heater can be used with different types of water tanks. The compatibility of the solar water heater with different types of tanks may vary depending on the design and specifications of the heater and the tank. It is important to ensure that the solar water heater is properly installed and connected to the specific type of water tank to ensure efficient and safe operation.
- Q:How does the angle of solar panels affect the performance of a solar water heater?
- The performance of a solar water heater is heavily influenced by the angle of the solar panels. The absorption of sunlight by the panels is directly impacted by their angle, which directly affects the efficiency and effectiveness of the solar water heater. It is ideal to install solar panels at an angle that maximizes the absorption of solar radiation. This angle should be calculated based on the geographical location of the installation and the tilt of the Earth's axis. The general guideline is to align the solar panels perpendicular to the sun's rays during the peak solar hours of the day. When the solar panels are correctly angled, they are able to absorb the maximum amount of sunlight. This absorbed sunlight is then converted into thermal energy, efficiently heating the water. However, if the solar panels are not angled optimally, they may not receive the full intensity of sunlight, resulting in a decrease in the performance of the solar water heater. If the angle of the solar panels is too steep, the sunlight may be reflected off the surface, reducing the amount of energy absorbed. Conversely, if the angle is too shallow, the panel may not receive the full intensity of sunlight, resulting in lower energy conversion. Moreover, the angle of the solar panels also impacts the system's performance during different seasons. For instance, in winter when the sun is lower in the sky, the angle of the solar panels may need to be adjusted to ensure maximum absorption of sunlight. Similarly, during the summer months, the angle may need to be adjusted to prevent overheating of the solar water heater. In conclusion, the angle of solar panels has a significant impact on the performance of a solar water heater. Properly aligning the panels at an optimal angle guarantees the maximum absorption of solar radiation, leading to efficient and effective water heating.
- Q:Can a solar water heater be used to heat swimming pools or hot tubs?
- Yes, a solar water heater can be used to effectively heat swimming pools or hot tubs. The solar collector panels absorb sunlight and transfer the heat to the water, which is then circulated through the pool or hot tub. This eco-friendly and cost-effective method of heating can help maintain comfortable water temperatures while reducing energy consumption.
- Q:What is the lifespan of the solar panels used in a solar water heater?
- The lifespan of solar panels used in a solar water heater can vary depending on various factors such as the quality of the panels, maintenance, and environmental conditions. On average, well-maintained solar panels can last anywhere between 25 to 30 years. However, with regular inspections, cleaning, and proper care, some panels can even last beyond 30 years.
- Q:Can a solar water heater be used in areas with limited access to replacement parts or components?
- Yes, a solar water heater can be used in areas with limited access to replacement parts or components. Solar water heaters are relatively simple systems that require minimal maintenance and have fewer moving parts compared to other types of water heaters. As long as the initial installation is done correctly and the system is designed to withstand the specific conditions of the area, it can operate efficiently for many years without the need for frequent repairs or replacement parts.
- Q:Can a solar water heater be used in areas with limited tidal power resources?
- Yes, a solar water heater can definitely be used in areas with limited tidal power resources. Tidal power is a renewable energy source that harnesses the power of ocean tides to generate electricity. However, it is not directly related to the functioning of a solar water heater. A solar water heater utilizes solar energy from the sun to heat water for domestic or industrial use. It consists of solar collectors, which absorb sunlight and convert it into heat, and a storage tank that stores the heated water. The system is typically designed to work efficiently in areas with ample sunshine. Unlike tidal power, solar energy is abundant in most regions of the world, regardless of proximity to the ocean. As long as an area receives a sufficient amount of sunlight, a solar water heater can be used effectively. Therefore, the availability of tidal power resources does not impact the viability of using a solar water heater. In fact, in areas with limited tidal power resources, solar water heaters can be an excellent alternative to traditional water heating methods that rely on non-renewable energy sources. By harnessing solar energy, these systems can significantly reduce reliance on fossil fuels, lower carbon emissions, and provide cost savings on energy bills. So, although tidal power is an exciting renewable energy source, its availability does not determine the feasibility of using a solar water heater. Solar water heaters are versatile and can be utilized in areas with limited tidal power resources, as long as they receive sufficient sunlight.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Solar Collector Water Heater With Copper Coil In Water Tank
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords