1. Audio Video cable
2.Conductor: Tin copper,10+10/0.10mm or 10+20/0.10mm
4.Shield: Tin copper
We are the adopter of the HDMI association in USA. And we are the authorized factory to produce and sell the HDMI cable.
Audio & Video cable, n RCA to n RCA, n RCA to n MD, n RCA to 3.5mm/2.5mm stereo, and the plug combination is base on the request.
Those are connected to CD player, Audio and Video player or computer system, etc. this cable set maximizes signal transfer for optimum sound.
- Conductor: Tin copper,10+10/0.10mm or 10+20/0.10mm, 28AWG
- Insulation: PVC.
- Color: Black/White / other color
- Thickness:0.4mm, Diameter:1.0 ± 0.1mm
- Shield: Tin copper, 10/ 0.10mm or 20/0.10mm.
- Jacket: PVC, Non migration against ABS, Lead free
- Length: 1.2M and other length are available.
- Testing: 100% open & short test.
- Contact Resistance: 30 Max
- Voltage rating: AC/DC 125V
- Current rating: AC/DC 1A
- Withstanding Voltage:AC 250V/ 1 min
- Insulation resistance: 100 Min
- Working Temperature: -25ºC ~ +85ºC
- Insertion Force: 35 N Max.
- Withdraw Force: 10 N Min.
- Q:Computer and TV HDMI connection When watching movies, how to set the computer in order to continue to watch movies without affecting the TV at the same time, they can play computer?
- No, the temperature of the cement floor is certainly lower than the air, but also conducive to heat, just afraid of the ground wet.
- Q:Motherboard ASRock (ASRock) FM2A55M-VG3 power cord can not be inserted
- In the integrated wiring system, the requirements of each cable has a unique label, the general practice is the patch panel on the number corresponding to the work area number, such as the work area number 4F-D-. the patch panel side The same is true. In fact, the correct approach is the work area of the label corresponds to the label of the patch panel, and patch panels do not have to label, it itself with a 1 to 24 port marked, for example: a management between the five cabinets, each There are 10 patch panels in the cabinet, each port on the patch panel has a unique code, that is, RACK (1 ~ 5) -PATCHPANEL- (1 ~ 10) -01 ~ 24. Ø Part of the yellow part: 1 to 5 of the cabinet in a red part of the said: 1 to 10 of the patch panel in a green part of the said: 1 to 24 of the port if you think this is too Long, can also be abbreviated as R4-P07-. representing the fourth cabinet of the seventh patch panel 12th port. Of course, the sorting of the cabinets and the distribution of the patch panels need to be agreed in advance. So that if the information point out the problem, the user just read out the information point of the label, the network management can be in a few seconds time in the patch panel to find the corresponding information point port!
- Q:Day cat box, AV line inserted two holes?
- Yellow and white red for a group of yellow burden of workers to pay attention to the barter shop bar is the video red and white is the audio you above this figure is another three sets of output to see you with that group was inserted in that group in accordance with the color Inserted on the line of red and white only the sound of the vertical and white has a vertical set of the above written
- Q:TV box did not show how the bright thing
- Plug the cable behind the set-top box, or restart it all
- Q:Computer connected to the projector, the data line is not long how to do? Can the data line in the middle of the cut line extension, which data inside the core of several? When the time is
- Hello: Almost all industries need to use spiral cables. Whether in communications (telephones, radios) or medical technology, electric locomotive industry, mechanical engineering, or in the lighting industry, spiral cables are used in every place. In addition to electrical - mechanical advantages, spiral cables are often used as excellent optical structure solutions. If you use PVC and PUR cables, the color of the spiral cable can be coordinated with the color of the object in most cases. At the same time we can also supply: shielded spiral cable. Spiral wire cable series, instrumentation with spiral cable, automotive power supply with the spring line, transformer power supply spiral cable, large mechanical and electrical equipment with a spiral cable, cleaning machine power with a spiral cable, automatic meter billing 5-pin spring line and so on. I hope my answer can be helpful to you. Thank you. Global Wire and Cable Portal - Cable Network
- Q:I am engaged in low-voltage distribution cabinet installation wiring work. Want to learn design, need to see what books?
- Simply put, the cable middle head for 2 cable connection, the cable terminal for the entry and exit, up and down the pole, understand it
- Q:How do you install a cable TV set-top box?
- According to the outer diameter of the cable and the shrinkage of the shrinkage of the diameter can be consistent, the diameter of the heat shrink tube itself is the expansion of the size, expansion ratio of 2; .3; .4; . you can choose according to actual needs.
- Q:How do I watch VCD on a digital TV?
- Cable shield to be completely peeled, put on heat shrink tubing, both are grounded. Shielded cable, mainly to protect the outside world electric field interference, control the cable itself, the working voltage and current are strong electrical properties, the interference of external interference slow control of many other control cable is turned weak transmission signal. When the outside world has strong electrical interference, the transmission of the weak signal may be seriously distorted, so that the control system out of control, or even damage the connected instrument or instrument, accidentally, the cable itself will be breakdown of the control cable withstand the ability to withstand voltage is not only One of the determinants of the maximum allowable value of the ground potential is determined, and it is an important basis for determining the grounding mode, the grounding point and the laying path of the cable shield and the insulation fit. The control cable to withstand the power frequency over-voltage, DC over-voltage and lightning over-voltage characteristics of the experimental study. The purpose of the test program is to test the operation of the control cable due to system failure caused by ground potential rise, the cable shield in the induction of over-voltage wave intrusion when the insulation performance. The control cable is stripped at both ends of the switch and in the control room and tied to the screen cabinet. The shield is connected to one or both ends of the shield. When the ground potential rises, the cable shield may be on the core, Parts of the core of the counterattack.
- Q:UPS input and output lines should be how to calculate the number of square cable?
- Cable cross section estimation method first estimate load current Use This is based on the power of the electrical equipment (kilowatts or kVA) to calculate the current (safety) formulas
- Q:Q: Can the reinforced concrete column inside the stand pipe (threading pipe)?
- . first audio cable and video cable (audio line (red and white), video line (yellow)) to the end of the network set-top box on the "right channel", the first day of the network, "Left channel", "video" (red, white, yellow) port, and the other end using the same method into the LCD TV audio and video input port. Old TV no home audio and video equipment transmission port (AV port), use a converter to convert the radio frequency into AV interface. . the corresponding line connection is correct, you need to check the audio and video cable has no corresponding color access TV and set-top box. . after the installation of the TV and set-top box to open the power, then use the TV remote control to convert the source to the corresponding network set-top box input video. . you can normally watch the network set-top box to play the program. . the network cable connected to the network set-top box network port; . all lines connected, open the TV and network set-top box power, and the TV signal source , the network set-top box network, Switch to the set-top box with the input video source mode; . this will be able to watch high-definition movies and television. Second, through the wireless networking steps. . click the [WLAN Settings] page in the upper right corner of the [close / open] button, you can find the "set" option in the settings menu, . click on the open in the [WLAN settings] settings page will appear a lot of wireless network name, find their own wireless network click to enter; . enter the wireless routing password, the general wireless password is . If you do not know, according to the wireless router to provide the URL, log on to set, you can open the wireless network, so that the set-top box even on the wireless network; . successfully connected to the wireless network, you can watch the network TV.
Nature of Business:
Manufacturing & exporting all kinds of cables, HDMI cable, USB cable, VGA cable, DVI cable, AV cable, power cable, sata cable, USB hub, displayport sieries and other computer or mobile phone accessories.Customers are exporters, importers, manufacturers,retailers, distributors, on-line shop owners etc.
Size & Capacity:
Our factory in Shenzhen has 1,500SQU workshop area, employing 50-100 workers. Capacity each month is 90,000 pcs cables with turnover around USD5 million yearly.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
||20.00% Central America
15.00% Eastern Asia
10.00% Southeast Asia
10.00% South America
10.00% North America
5.00% Domestic Market
5.00% Eastern Europe
5.00% Southern Europe
5.00% Western Europe
5.00% Northern Europe
2.00% Mid East
2.00% South Asia
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
||1,000-3,000 square meters
|No. of Production Lines
||OEM Service Offered Buyer Label Offered
|Product Price Range
||Low and/or Average