Aluminium Foil Rolls For Light Lampshade
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Aluminium Foil Rolls For Light Lampshade
Alloy: 1235, 8011, and etc
Temper: Soft, O
Width: 200-1650mm
Thickness: 6.5-20 micron
China GB, ISO, JIS, ASTM series standards
Products Parameters
Inner Core | 76mm/152mm |
Outside Core | 360mm-420mm /560mm-620mm,also can make according to customers’requirements. |
Core Material | Aluminum ; Steel |
Surface | One side bright ,the other side matt ;or both side bright |
Surface Qualty | Clear ,smooth ,without defects,gaps ,riddles ,lubricant leftovers ,folds and mechanical defect and be chromatic. |
Grade | Grade AAA |
Degreasing | Without oil left on surface ,easy compound and printed. |
Pinhole | Meet with the international standard. |
Package & Shipping
FAQ
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union, etc
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons.
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union,etc
- Q:What kind of glue is the lampshades broken?
- Hello, if it's a mirror broken, it's recommended to replace it, even if it's glued together, it will affect the light search, it will not be clear at night,
- Q:Is there another type of glass for LED mode lamp shade?
- Tea color glass face mask, ivory glass face mask and so on, specific you can ask the sale businessman
- Q:White plastic lampshade is yellow, is there a way to clean?
- You'd better change the new one.There is no way to clean, only change..
- Q:How does the photoshopped white bottom fight
- Make your selection, then use a white transparent gradient and then set the transparency
- Q:How will the lampshades be removed?
- Inside the lampshade three such as jammed, counterclockwise rotation can be removed and marked with arrows.
- Q:How to open the lampshade of the eup
- Hello, the lamp is backwards on the jingse absorption, you see above the chimney, there are a lot of leg, according to the directions, unplug all the legs according to certain direction unplug, such like a natural came down, and under the light tube, is very simple, the original removed the tubes, the good directly to the press on the line, how to do, is very simple
- Q:How does the motorcycle chimney turn yellow
- Go and repair the whole hernia lamp, the thief is on! All the yellow and white!
- Q:How does the lamp tube break down in the oop square lamp and remove the lamp shade?
- Look at the lights on the top of the kitchen integrated ceiling, and if that's the case, the lights are modular, like aluminum plates,
- Q:What about the fog in the headlights of a car
- Because of the lack of seal of the big lights, the solution is as follows; You can slowly dry out the outside, but not completely Open the sealant and clean it thoroughly, then wrap it up Remove the large lamp, open the back cover, blow dry with a hair dryer, and then apply some sealant If the newly installed or newly bought vehicle is the quality problem of the process; Should go to dealer 4S shop. If it works for you, look at it.
- Q:How to clean the sheepskin lamp shade?
- Only continuously strengthen maintenance in use, lamps and lanterns can prolong the service life, therefore, installed in the room often should use dry cloth to wipe the tubes, and pay attention to prevent moisture intrusion, lest after a long time, the phenomenon of the corrosion damage or leakage short circuit. And the sheepskin lamp that is installed in the bathroom must choose to choose moistureproof lampshade as far as possible, otherwise its service life will be greatly reduced. Some sheepskin lamps and lanterns is usually combined with a wooden structure, so the maintenance and cleaning the sheepskin lamp of this type, be sure to twist dry dishcloth will, so as to avoid deformation of woodiness material suction.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aluminium Foil Rolls For Light Lampshade
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords