Air Vent Valve with High Quality Automatic on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q:I'm going to put a solar energy and an electric water heater installed in the same hot water pipe, a valve, a valve open and close the valve B and vice versa the installation of solar and electric water heater, there can be no linkage valve?
- In industry, you say this, such as using two butterfly linkage and composition of the three-way valve to use. But civilian should be few, demand is very little ah. It is estimated that you can only install two valves and then use both hands at the same time to perform linkage.
- Q:The difference between fire general valve and fire fighting special valve
- Fire fighting valves are mainly signal valves and alarm valves and water indicators, etc., other gate valves, butterfly valves, pressure relief valves and filters are common valves.
- Q:1. What does valve 13Cr&FHF mean? 2, valve WC6 (F11) what does that mean? 3. What does valve P280GH mean? 4. What does valve A335P22 mean?Thank you
- The first seems to refer to the material inside the valve, containing Cr of 13% (equivalent to the 1Cr13 of our country), FHF=full face hardThe other refers to the body of the material, the corresponding standard forWC6=ASTM A217 WC6P280GH=EN10222 P280GHA335P22=ASTM A335 P22
- Q:Is there any problem with connecting the geothermal valves with other geothermal pipes?
- Material is the same, the fuse will not cause shrinkage when you can use
- Q:What kind of valves are best used for sand drain valves?
- Suzhou ATW Valve Co. Ltd production of sealing ball valve, Suzhou ATW Valve Co., according to the condition of solid particles, long-term research and in practice, and achieved good results in the condition of solid particles. You can try!
- Q:Where is the hydrant main valve?
- There is a gate valve at the elbow below the hydrant
- Q:Why is copper used in cryogenic valves?
- The rigidity of copper is better, and the friction parts are not easy to produce adhesion. The influence of temperature on copper is smaller than that of steel. Especially in the valve stem, there is also the important gear part, copper!
- Q:How to suppress the valve?
- Upstairs is right... But look at the situation, there are some valve flange is 16 pressure, but the body can only play 10 pressure, there are cases.. Such as knives, valves and other ventilation valve
- Q:What does the valve "4" mean?
- This is an inch inch size, 4 inches =1/2 = 25.4mm = 12mm
- Q:What do you mean by "P54" in the valve z962y-p54 100V?
- P54 is the body temperature, heavy rain or equal to 545 degrees, 100V is 10Mpa, that is 100 kilogramsThere are all the valves on the nameplate
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Air Vent Valve with High Quality Automatic on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords