Air Evacuation Valve SUFA with Solar Water Heater Exhaust Valves /73mm

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 pc
Supply Capability:
1000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

1.Packaging & Delivery

Packaging Detail:

standard export packing, steel pallets, wooden pallets, customers required

Delivery Detail:

10 Days

 Air Evacuation Valve  Specifications

1. good structure
2. pressure and impact
3. stability performance

Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.   

2.Product Introduction 

Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer  ring, valve lid, Valve base. 

 Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard

3.Working Principle 

 1.Static status: Once you set up a pressure range. Normally,  pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.

2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.

 3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.

4.Features

1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.

5.Our Services

Private Customized:

We design  different Pressure Relief Valve according to specific requirement.

Customers’ Guidance:

Please leave the following info in inquiry

1.  What’s the raw material  ( carbon steel or stainless steel  )

2. What’s the entrance diameter( 508 mm /273 mm  or customized)

Because with these factors, we are able to give you a fast answer.

 

Air Evacuation Valve SUFA with Solar Water Heater Exhaust Valves /73mm

Air Evacuation Valve SUFA with Solar Water Heater Exhaust Valves /73mm

Air Evacuation Valve SUFA with Solar Water Heater Exhaust Valves /73mm

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Signal butterfly valve installation or other valve installation
The blue one is the separate body, and the red one is the welded flange on the pipe. There is rubber on the valve body, and it can be sealed with flange. This is determined by the structure of the butterfly valve, usually DN150 of the small diameter butterfly valve are installed this way. It comes with flanges, but the prices are much higher. Small caliber general butterfly valve is generally used for low pressure, leakage requirements are not high, so rarely use its own flange. With flanges, it is generally used in petrochemical systems and has a much higher pressure level.
Q:Mechanical valve
From the appearance of it is not too good to say, if it is the valve, only one-way valve.The valve usually consists of the stem, spool, seat, body, seal, and so on. This figure feels more like a filter that connects a pressure vessel to an inlet or an inlet.I've seen a lot of filters like this, usually open with -drain filter inside. Play a role in the filter of some large magazines, you can change, more metal, the mother is relatively small (relatively large hole)
Q:Proportional valve why than other small pipeline valves
3.10 pipes and their accessoriesGraphical representation of numbers, names, symbols3.10.1 flow pipeline thick lines.3.10.2 meter, pipe line, heating and blowing pipeline, fine solid line3.10.3 pipe with casing3.10.4 steam tracing tube3.10.5 cross pipe means two pipe crossing is not connectedThe 3.10.6 intersecting pipe refers to the intersection of two pipelines, and the diameter of the connecting point is 3~5 times of the line width of the connected pipe line3.10.7 branch pipeline3.10.8 medium flow is generally marked near the valve graphical symbolsThe 3.10.9 heat retaining tube may be represented by the symbol on the local portion of the insulated pipe3.10.10 pipe slope, line slope mark, drawn by the slope symbol in GB4458.43.11 general connection form of pipelineNumber, name, graphic symbol3.11.1 flange connection3.11.2 flow orifice3.11.3 pipe end sealing plate
Q:What valve is the DN 25?
DN25 is just a caliber, a variety of valves, depending on your actual needs to buy Valves, water or gas, or other special functions, are the basis for the purchase of the valve must be provided
Q:What is the KVS in the valve parameter?
The valve Kvs is to reflect the passing capacity of the valve, which is defined as the pressure at both ends is 1bar, through the flow of the valve, Kvs is a characteristic parameter of the valve, and valve structure, is a constant value.
Q:How big valves are used in the DN90 pipeline?
If you use a 97 tube, the inner diameter of 89- phi 90., nominal pressure is low, then try to use DN80, DN80 valve diameter of 80, you can try butt welding
Q:Valve pressure test
Strength test is nominal pressure of 1.5 times, the test time is 5min, the test time, the valve body is not broken, no deformation, the valve is not leaking water, the pressure gauge does not drop to qualified. After the strength test has passed, the tightness test is carried out. The tightness test pressure is equal to the nominal pressure. The valve does not leak in the test time, and the pressure gauge does not drop to be qualified.
Q:The water pipe in the house is broken.
Not recommended against the flood to repair the valve, first you have to be repaired, second may be more complex, it is not easy. I have a bad experience this, take the valve, because it is plastic, and aging, the thread is broken, the new is not on do not have to flow out of the water, get it is. To find the valve, the mess!
Q:What are the uses and differences of gate valves, butterfly valves, ball valves and other valves?
Valve and ball valve is generally used in the main pipe, long-term use, butterfly valve is often used frequently,
Q:What does the "XV" valve mean?
XV if in front of the valve position, such as XV2211-011, then the XV indicates the switch valve, which is a representation of the Control Valve relative to the regulating valve.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range