Ac12V 6SMD 5050 G4 SMD LED
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 50 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
AC12V 6smd 5050 g4 smd led
Models
Color temperature:
warm white :3000k,
pure white :4000k,
cold white :6000k,
Specification
Model No. | Base | LED QTY | Watts | Voltage | Lumens |
AL-G4-6SMD | G4 | 6SMD5050 | 1W | AC/DC12V | 90LM |
AL-G4-9SMD | G4 | 9SMD5050 | 2W | AC/DC12V | 130LM |
AL-G4-10SMD | G4 | 10SMD5050 | 2.4W | AC/DC12V | 150LM |
AL-G4-12SMD | G4 | 12SMD5050 | 2.8W | AC/DC12V | 180LM |
AL-G4-21SMD | G4 | 21SMD3528 | 1.5W | AC/DC12V | 100LM |
Advantages
Good quality with reasonable price
Components are made by adopting high quality SMD5050 led lights which imported from Taiwan original chips as the light source, it has high lumin and low light loss.light loss is less than 5% during 3000 hours.Other led chips are available ,like Cree ,Sumsung and epistar
Our Service
1.Certification: CE/ROSH
2.Warranty:2years
3.Samples available
4.Customized design for g4 led light is allowed
5.Designated packing is allowed
6.Discounts are offered based on order quantities
Terms of payment
T/T,L/C ,30% deposits in advance,70% balance to be paid before delivery
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:How can I install the patch LED lamp belt on the wood chip casting board? With double-sided glue will be hot, and can not use the clip on the screw, what should I do?
- More attention is paid to the lamp with waterproof and the installation of a solid in the outdoor installation, outdoor installation often adopts the mode of fixed card slot, need to cut and connected place, and indoor installation, just need another with waterproof glue, waterproof effect to consolidate the connection point.
- Q:What is the difference between SMT LED packaging with silicone and epoxy resin transparent package? What is the market situation of these two types of packaging?
- To package with epoxy SMD beads are used in a lot of outdoor display, because the epoxy adhesive with good adhesion to all better PPI support in outdoor use, our high quality and inexpensive epoxy epoxy call for samples
- Q:What is the difference between patch LED beads and LED beads: General
- A pin of the lamp, and outside a resin cap, because the reason LED beads can spotlight cap;There is no pin on the patch and there is no resin cap outside. Because of the lack of cap, the LED patch can not be concentrated.Patch is based on small power, the shape is relatively small (usually 0.5 and 0.5W products)It's called patch because some small ones need Mounter to machine.The ordinary LED lamp, solder joints than SMD beads, now is the largest artificial welding. Regular watts count from 1-300W
- Q:Indoor full color LED display module and LED what is the difference between a full color?
- The classification of the LED display according to the installation environment: indoor LED display screen, semi outdoor LED display, outdoor LED display; according to color: color LED screen, dual color LED display screen, LED display screen, the color LED display screen; according to the functional area can be divided into graphic screen, screen, screen, screen, digital dot matrix digital hybrid screen.
- Q:SMD LED lamp working voltage?
- Voltage range of white LED lamp: 3.0-3.4VThe pressure drop of the red LED is 2.0--2.2VThe yellow light emitting diode has a pressure drop of 1.8 - 2.0VThe green light emitting diode has a pressure drop of 3 - 3.2VThe blue light emitting diode has a pressure drop of 3.0-3.4VSMD voltage is basically the same as double lead line. Current is generally 20~60mA, and some work current can exceed 100mA.
- Q:0603,0805,1206,3020,3528,5050,355 what is the current and voltage of these patch LED? Please give advice!
- The patch LED is also called SMD LED. Its principle of luminescence is to pass the current through the compound semiconductor. Through the combination of the electron and the hole, the excess energy will be released in the form of light to achieve the effect of luminescence.
- Q:LED package and LED SMD LED lamp, what is the difference? Will the release agent be used in that part?
- They differ in form and belong to the SMDLED category. Encapsulation uses liquid silicone and epoxy resins as well. The patches are basically made of epoxy resin. Relatively speaking, the amount of liquid silica should be relatively large.
- Q:LED patches have several ways of welding. Which ones can be reflow? What can be done by eutectic welding? Is the welding of viscose and lens material is required?
- L electrode for eutectic solder reflow, the other can be used, regardless of the kind of welding, the temperature is not lower than 100 degrees, the flammable soluble materials have strict requirements, depending on whether the welding temperature is lower than the melting point of what you said or. Otherwise, there will be deformation or damage to the material in the reflow process.
- Q:What is patch SMD-LED?
- Semiconductor wafers consist of two parts, one is P type semiconductor, in which the hole dominates, and the other end is N type semiconductor, which is mainly electronic here. But when the two semiconductors are connected, they form a P-N junction between them. When the current passes through the wire acting on the chip, the electrons are pushed into the P region. In the P region, electrons combine with the hole and then emit energy in the form of photons, which is the principle of LED luminescence. The wavelength of light, that is, the color of light, is determined by the material that forms the P-N junction.
- Q:What are the storage requirements of SMT patch LED (LED)?
- Clean? use no designated chemical liquids to clean SMD LED. These chemicals may damage SMD LED.. When necessary, wipe LED at room temperature with alcohol and dry at room temperature for 15 minutes before use? the effect of ultrasonic cleaning on SMD LED is related to the ultrasonic power and the SMD LED assembly method, and shall be checked in advance to ensure that the ultrasonic cleaning process does not impair the SMD LED
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Ac12V 6SMD 5050 G4 SMD LED
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 50 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords