3/4 4 X 8 Plywood - Timber Beam Formwork Plywood with Brown Film
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m³
- Supply Capability:
- 6000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Plywood Introduction :
Plywood is with film faced , it is widely used in construction formwork system , it is the direct close with concrete .To make sure flat concrete surface, we ask the plywood better surface and long using lifetime .It can be with brown film and black film and plastic film.
Feature:
1.High bending strength
2.Strong nail holding
3.Moisture-proof and easy work
4.Tight construction and high strength
Specification:
Film | Chinese film 180-240g/m2 | |
Core | birch,poplar, hardwood ,combined or others | |
Grade | A/A or requested by customers | |
Glue | WBP,MR,Melamine(waterproof) | |
Size(mm) | 2440X1220, 2500X1250, 3000x1500 | |
Thickness(mm) | 6-27mm | 1/4inch(6-6.5mm) |
1/2inch(12-12.7mm) | ||
5/8inch(15-16mm) | ||
3/4inch(18-19mm) | ||
Moisture | ≤10% | |
Thickness tolerance | ≤ 6mm | +/-0.2mm to 0.3mm |
6-27mm | +/- 0.5mm | |
Packing | For transportation of Ocean and Land, Inside Pallet is wrapped with 0.2mm plastic bag, Steel strip or PVC for strength, More than 2mm plywood sheet or hard paper covering all the sides left, right,top and bottom. | |
Quantity | 20GP | 8 pallets/21M3 |
40GP | 16 pallets/42M3 | |
40HC | 18 pallets/53M3 | |
Usage | Usage Adequate for concrete forming for construction | |
Min Order | 1x20'ft container | |
Payment | T/T or L/C at sight | |
Delivery time | Within 20days after receiving deposit or Original L/C at sight |
- Q: What is the composition of the plywood?
- Usually with odd-numbered veneer, and the adjacent layer of the fiber in the direction perpendicular to each other. 【Content compiled from Sina decoration grab the foreman】
- Q: What are the further processing of plywood?
- plywood plywood through mechanical finishing or gluing, such as cutting, profiling sawing, hitting, drilling, milling and other processed plywood
- Q: What harm does the plywood factory work?
- Plywood using adhesives, containing benzene, toluene, xylene and other solvents, with the corresponding occupational hazards
- Q: The density of the plywood is greater than that of the same kind of wood
- Plywood gluing strength, according to the Chinese national standards: Ⅰ class plywood for the 1.2 ~ 1.6 MPa, Ⅱ class 1 to 1.4 MPa, Ⅲ class 1 to 1.2 MPa, Ⅳ class 1 MPa
- Q: What is the density of plywood?
- With the veneer after the wood by the direction of the criss-cross the composition of the slab, heated or not heated under the conditions of suppression.
- Q: What is the amount of construction works used for this plywood?
- The second type of plywood is water resistant plywood, can be immersed in cold water and short time hot water immersion;
- Q: What is a joinery board?
- Blockboard core board should be the same species or similar properties of the tree species, water content of 6 to 12%. Core width is not greater than three times the thickness, do not allow a larger crack, holes and so on
- Q: Hard fiber board is also a density board
- the same texture direction. Adjacent two-layer veneer grain direction should be the same. The plywood should be the same tree.
- Q: Decorative veneer veneer plywood features
- Decorative veneer veneer plywood is one of the most commonly used materials for interior decoration
- Q: For the plywood environmental advice?
- Phenolic glue: moisture, excellent resistance to boiling, weather resistance / can be used for outdoor or indoor, can withstand outdoor wind and rain.
Send your message to us
3/4 4 X 8 Plywood - Timber Beam Formwork Plywood with Brown Film
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m³
- Supply Capability:
- 6000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords