Q:What's the difference between refractory metal raceway and fireproof raceway?

Fire protection slot won't cause fire accident under the temperature of no more than 200℃. While the refractory cable tray is made with refractory materials and can withstand high temperature of 800℃ with no fire accident happening. The test standard depends on the maximum temperature it can endure. Hope it's helpful for you!

Q:Can anyone tell me the requirements of the refractory masonry?？

Refractory materials actually have two functions. The first one is to improve the refractoriness and the second one is to improve the body plasticity of refractory materials.The higher the aluminum content is, the better refractory it will be. Of course, the content of aluminum in refractory materials can not be impoved only by using kaolin. Such raw materials that contain more aluminum as bauxite chamotte should be used as framework.So the content of aluminum in kaolin does not need to be too high and more than 38% of aluminum is enough. However, the viscosity should be taken into account. It will be better if the viscosity is better as the extra bentonite do not need to be added.The refractoriness that is is above 1400 degree is enough.

Q:How long is the duration of fire resistance of autoclaved flyash-lime bricks?

How long is the duration of fire resistance of autoclaved flyash-lime bricks?

Q:How many kinds of A-level fireproof and thermal insulation materials are there?

1. foam insulation board refers to foam ceramic insulation panels whose raw material is inorganic ceramic which is calcinated at high temperature with abbreviation of ceramic insulation board 2.Composite cement foam insulation board is a hydrophobic lightweight closed-cell insulation board whose main materials are cement, fly Ash, and silica fume which has been foamed, cured and cut. 3. aerated concrete panel is a lightweight concrete panel which has been autoclaved with lightweight materials, siliceous material and gas former as its raw materials. 4. rock wool panel, with natural igneous rock wool as its main raw material, is a cotton which is melted in high temperature by centrifugation and is pasted by thermosetting resin.

Q:What a blast furnace refractories generally?

Common refractories often use silica?brick, semi-silica brick, fireclay brick, high alumina brick, magnesia brick, etc. special materials often used are AZS brick, corundum brick, directly bonded magnesia-chrome brick, carborundum brick, silicon nitride bonded silicon carbide bricks, nitrides, silicides, sulfides, borides, carbides and other non-oxide refractory materials; calcium oxide, chromium oxide, aluminum oxide, magnesium oxide, beryllium oxide refractory insulating refractory frequently used. material diatomite products, asbestos products, insulation boards. monolithic refractories have fettling frequently used, refractory ramming mixes, refractory castable, fire-resistant plastic, refractory clay, refractory gunning refractory projection material, refractory coatings, lightweight refractory castable, stemming etc.

Q:What are the standards of refractory concrete ?

It can be divided into: 1. Ordinary refractory concrete Aggregates used include high alumina, clay, silica, basic materials (magnesite, chromite, dolomite, etc.) or special materials (carbon, silicon carbide, zircon, etc.). It can also use several combination of refractory material. 1. Thermal insulated refractory concrete It is mainly formulated with refractory light aggregates. The light aggregate used can be expanded perlite, vermiculite, ceramsite, porous chamotte, alumina hollow ball, etc. It can also be a combination of several refractory light aggregates or combination of the refractory aggregates. The aggluetination material used in refractory concrete can be high alumina cement, phosphate binders, water glass binder and clay, etc.

Q:I want to consult the fire resistant level standards of external wall thermal insulation materials.

1, The thermal insulation material that has level A combustion performance: Spraying inorganic fiber, glass wool, foam glass, ceramic foam, rock wool, foam cement and perlite obturator, and so on. 2, The thermal insulation material that has level B1 combustion performance: Special processed extruded polystyrene board (XPS) / special processed polyurethane (PU), phenolic and polystyrene powder. 3, Thermal insulation materials that have level B2 combustion performance: Molded polystyrene board (EPS), extruded polystyrene board (XPS), polyurethane (PU), polyethylene (PE), etc. See article 4.3.6 in the 2009 edition construction technical measures. Level A insulation material is just for fire protection, so its thermal insulation performance is worse than the organic XPS or EPS materials. Hope this will help you.

Q:Are there any differences between insulation and refractory materials ?

Refractory materials can resist more than 1200 degrees, some of which are not insulation materials, such as firebricks, which can directly contact with heat source, has little insulation effect. Ceramic fiber, high silica, etc. are all refractory materials which can insulate. Insulation materials with poor performance usually is lower than 800 degrees, which have large thermal resistance, and low thermal conductivity, high porosity. Thus they reduce the thermal loss. To put it simply, insulation materials store most of the heat and only let a small part of heat lose through the air, thus the heat has been isolated. Glass fiber, rock wool, flexible material for thermal insulation, etc.

Q:How long is the fire endurance of fire resistant rolling shutter door?

According to fire endurance, fire doors can be divided into Class A, Class B and Class C fire doors, whose fire resistance should be no less than 1.20h, 0.90h and 0.60h respectively. You can use fire resisting shutters to seperate fire?compartments in places where it is difficult to set firewalls. When using the fire resisting shutter with unexposed surface temperature rise as fire endurance conditions, its fire endurance should be no less than 3h. But when using the fire resisting shutter without unexposed surface temperature rise as fire endurance conditions, you should set independent protection of closed automatic water spray system at two sides of the shutter, and the duration of water spraying should be no less than 3.0h. I hope it's useful.

Q:How to divide the materials according to the National Fireproofing Material Standard?

Each country has its own fire safety standards, I do not know which country's standard do you want to know, and each country of fireproof material to the division level is not the same. GB GB 8624, the German standard DIN 4102-1, the British standard BS 476, French standard NF P92 -501 and so on. GB 8624 is Chinese building materials and grade of combustion performance. The information coming form fire resources network (FireTC.