Q:What's the fire resistance test method of doors and roller shutters?

Fire resistance test method of doors and roller shutters: This standard specifies the fire resistance test method for roller shutter doors under standard fire conditions. The method is used to test the fire resistance of the ventilating duct when bearing the external fire (A duct) and internal fire (B duct). Fire resistance test of vertical ducts may be conducted referring to this standard. 1.Test specimen1.1 The test specimen is obtained by cutting from any part of the qualified metal tube unless otherwise relevant standard or mutual agreement specifies the cutting position of the metal tube. 1.2 Length of the specimen: L≈2.5D+50mm (D: outer diameter of the metal tube). The cut surface of the specimen must be perpendicular to the axis of the metal , and the seamed edge of the cut should be round off. Test method GB243-82 of metal tube necking 2. Test procedures 2.1 In the test, punch or press the metal tube into the tapered conical seat (see Figure) with a hammer or press machine, and make it uniformly diminished to the regulated shrinkage X which is calculated according to the following formula: Test method GB243-822 for metallic pipe necking: The inner wall of the seat cover used in the test should be polished, and has certain hardness and is coated with lubricating oil. Its conicity is 1:10, 1:5 or others in accordance with relevant standard provisions. If there is no provision, then adopt the conicity of 1:10. This standard is not suitable for: a) The pipeline whose fire resistance depends on the fire resistance of the ceiling; b) The pipeline with access door, unless otherwise the access door is included into the pipeline and tested together; c) The pipeline with two or three sides; d) Fume exhaust pipes;

Q:Refractory factory grinding brick dust harmful to the body?

The effect is very large and belongs to lung disease.

Q:What are the main characteristics of the sic refractories?

1. The usge temperature of silicon carbide refractory is generally 1760 ℃ 2. The silicon carbide refractories can withstand the dramatic changes of temperature and have a good thermal shock resistance performance. To prevent the cracking or breaking of lining refractories. 3. Under the conditions of high or low temperature, it can withstand a certain compressive stress. 4. Under the conditions of high or low temperature, it can withstand friction. 5. It can withstand the huge hydraulic pressure or buoyancy of the metal. 6. It can also withstand the effect of furnace gases to prevent the infiltration of other refractories and reactions.

Q:How long is the fire endurance of Grade A fire resisting shutter

Based on national standards GB 14102-2005 specifications. It is specified in GB 14102-2005 provides that: The fire resisting shutter whose fire endurance is not less than 3h is AAA fire resisting shutter when the unexposed surface temperature rise is used as judging condition. Therefore, it is required that the fire endurance of Grade A fire resisting shutter is 3h.

Q:What does refractory mean?

Basic refractory material generally refers to Magnesium Oxide or Magnesium Oxide and calcium oxide as the main component of refractory materials. This kind of refractory material has higher refractoriness and strong resistance to alkaline slag.

Q:What are the construction measures of refractory material in winter? Please descriptive briefly.

Binding agent should be attaced great importance to when construction is conducted in winter. Generally if the bingding agent is water or cement, antifreezing measures should be taken.

Q:What are the specifications of fireclay bricks?

Standard sizes of refractory bricks in our country are: 230mm × 114mm × 65mm; standard density: 1, Diatomite insulating bricks 0.7 g / cubic centimeter; 2, Clay bricks 2.9 g / cubic centimeter; 3, High alumina brick 3.2 g / cubic centimeter. You can convert according to the actual volume, and the reference value can be calculated.

Q:what is the specs of thermal insulation refractory slab ?

Fireproof insulation specification is 1220 * 2420 1220 * 2420 * 8 * 9. HPL also known as the fireproof board is scientificly named thermosetting resin impregnated paper laminated wood, the abbreviation of which is HPL.Decorative high-pressure Laminate is fire-resistant building materials for decorative purposes. It is rich in surface color, texture and special logistics performance, widely used in interior decoration, furniture, kitchen cabinets, laboratory table, external walls.

Q:Is it necessary for the frame of glass fireproof door to be crammed with fire-proof material?

Close the door , and check if the gap is normal, whether the hole and the door leaf are in the same plane, and whether the door leaf has tendency to fall down. Fire resistance steel door——means that use a cold rolled steel sheet as door frame, door plank and framework, and stuff a door leaf with incombustible material.

Q:How many refractories are there for boiler above 1200 ℃？

In addition to refractory brick, refractories include refractory concrete (refractory cement+aggregate), fire-resistant insulating layer (refractory cement+vermiculite powder or refractory cement + diatomaceous earth) and the like. Refractories often used are azs brick, corundum brick, direct-bonded?magnesia-chrome?bricks, carborundum brick, silicon nitride bonded silicon carbide brick, nitride, silicide, sulfide, boride, carbide and other nonoxide refractory materials, calcium oxide, chromium hemitrioxide, aluminium oxide, beryllia and other refractories. Thermal insulation refractory materials often used are diatomite product, asbestos product, insulation?board,etc. Unshaped refractories often used are repairing?mass, ramming?mass, castable refractory, plastic refractory, refractory mortar, refractory gunning mix, sling refractory, refractory coating, lightweight refractory?castables, stemming, etc.