Refractory Raw Materials-Silicon Fume SF-97

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
50 m.t.
Supply Capability:
5000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

CMAX Brand Silica fume is a byproduct of producing silicon metal or ferrosilicon alloys.It consists primarily of amorphous silicon dioxide (SiO2),its average granule diameter is 0.15~0.20 µm,specific surface area is 15000~20000 m2/kg.

1.      Very low permeability to chloride and water intrusion.

2.      Extremely high electrical resistivity.

3.      Increased abrasion resistance on floors,highways,marin structures.

4.      Superior resistance to chemical attack from chlorides,acids,sulfates.

 

Grey Densified and undensified Silica fume for cement

Analysis

Result

SF85

SF88

SF90

SF92

SF94

SF96

SF97

SF98

SiO2(%)(min.)

85.05

88.05

99.05

92.05

94.05

96.05

97.5

98.5

Fe2O3 (%)

0.78

0.44

0.21

0.25

0.20

0.20

0.10

0.20

Al2O3 (%)

0.29

0.20

0.21

0.25

0.20

0.20

0.20

0.20

CaO (%)

0.39

0.30

0.36

0.30

0.30

0.30

0.30

0.30

K2O+ Na2O (%)

0.29

0.24

0.22

0.20

0.20

0.20

0.20

0.20

Moisture (%)

3.05

2.55

2.05

2.05

1.85

1.25

1.00

1.00

Loss on Ignition (L.O.I) @975OC (%)

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the principal part of silicious refractory material
blast furnace hot blast stove and ceramic tunnel kiln vault, etc., the softening temperature under a fixed load is high (1690-1710 degree), glass melting furnace, lightweight silica bricks and generally the silicon dioxide is greater than 93% and used above the 600 degree. I had undertaken to complete the 50,000 tons over two advanced silica brick production line design. It is a typical acidic refractory. At present, it is mainly used to coke oven which the masonry operating temperature is higher than 600 degree, with good acid resistance of slag erosion, including silica brick, good thermal conductivity, high thermal vibration stability, product with fused quartz, close to its refractoriness silicious refractory SiO2 which is as the main component of refractory products.
Q:What is the biggest difference between refractory bricks and clay refractory bricks? Where can I find information on the refractory bricks?
You can look up knowledge manual of refractory material to find phosphatic material, etc. Xinjiang refractory bricks, castable refractory, refractory material, silicious, corundum and alumina-magnesia: High alumina and clay refractory bricks can be divided into
Q:What is the new fireproofing standard of external wall thermal insulation materials?
The civil builduing with thermal insulation material for exterior wall in the scope of construction fire safety design and fire inspection should put the combustion performance of building thermal insulation material for exterior wall into the content of review and acceptance. The civil builduing with thermal insulation material for exterior wall beyond the prescribed scope of Article 13, Article 14 of "Fire Supervision and Management Regulations of Construction Project" (Ministry of Public Order No. 106) should all be included in the scope of checks. Before released the new standard, it should be strictly implemented the Article II of "Provisional Regulation of Civil Building External Thermal Insulation System and Exterior Wall Decoration Fire Prevention" (known through word [2009] No. 46), the civil builduing thermal insulation material for exterior wall uses level A combustion performance material. I hope my answers are helpful to you.
Q:What are the specifications of fire resistant bag?
Currently there are four specifications: C10, C40, B40 and B50 suitable for steel ladle of less than 60 tons. I hope it can help you.
Q:What brands are the best in the A-level refractory materials?
This is two descriptions, glass wool refers to the texture of insulation materials, and A-lever refers to the combustion performance of fireproof materials. Generally the glass wool can achieve A-level combustion performance, unless you have add too many other combustible materials to it.
Q:Does anyone know about the classification standards of B2-level fireproof and thermal insulation materials?
1.The insulation materials with A-level combustion performance: EPS Hairong module, rock wool, glass wool, foam glass, ceramic foam, foam cement, closed-cell perlite, etc. 2. The insulation materials with B1-level combustion performance: specially-treated extruded polystyrene boards(XPS)/ specially-treated Polyurethane(PU), Phenolics, Polystyrene rubber powder particles,etc. 3. The insulation materials with B2-level combustion performance: Expanded polystyrene sheets(EPS), Extruded polystyrene boards(XPS), Polyurethane(PU), Polyethylene(PE), etc. See the 2009 measures of building technology. The A-level insulation material is only fireproof, the insulation performance of it is worse than that of organic XPS \\\\ EPS material. Currently I think that the best insulation material should be Hairong EPS module, it not only achieves the requirement of insulation but also fulfills the goal of fireproofing, and the comprehensive unit price of it is not expensive. The insulation materials in the domestic market have their own disadvantages, you'd better take the building demands into consideration, and use the materials that are within the acceptable range.
Q:Could you tell me how does fire protection standard of decorative material is divided?
Building materials can be divided into four levels according to combustion performance (non-combustible, flame retardant, flammable, flammable). According to the Code for Design on Building Fire Protection and Prevention (GBJ16-1987) (revised in 2001):, the fire risk of production or storage is divided into a, b, c, d, e classes. Divided by plate material: structure material, base layel materials and fabric; Divided by fire protecrtion type: easy to burn, difficult to burn, flame retardant, incombustible material. Material has no fire rating, only the different from the time of combustion limit. Combustion performance grade A of commonly used adornment material: granite, marble, terrazzo, cement products, concrete products, gypsum, lime products, clay products, glass, ceramic tile, Mosaic, steel and alloy. I hope my answer can help you.
Q:Who know about the knowledge of acid refractory material? Please explain in detail.
Abrasion resistance of fire resistance material depends on the material group and structural material. The abrasion resistance of dense single crystal materials depends on the hardness of mineral crystal. The higher the hardness, the more resistance the material is to abrasion. non mineral crystals with fine grain material has a high wear resistance. The abrasion resistance of materials is related to bulk density or porosity. Aluminium refractory material can resist a temperature as high as 700~900 degree within the elastic range. The higher the temperature, the lower the resistance. Abrasion resistance will be increased with elastic modulus as temperature increase. In many cases, refractory material will often cause a lot of harm due to mechanical abrasion.
Q:Who knows the external wall thermal insulation materials fire rating requirements?
The basic requirements of ratings. The design should comply with relevant state regulations and standards, the combustion performance used in exterior insulation material shouls be level A and not less than the level B2 fireproofing material. The requirements of Department of Housing and the Ministry of Public Security No. 46: Residential buildings: the height of building is greater than 100 meters, the combustion performance of insulation materials should be level A. The other civil buildings: 24≤ height
Q:What are the grades of refractory exterior wall thermal insulation materials?
Classification of fire rating of extrior thermal insulation materials 1, According to national standard GB8624-97, the combustion performance of building materials are divided into the following grades A level: Incombustible building materials: Materials hardly burn. B1 class: Flame-retardant building materials: Flame-retardant material has good flame resistance. In case of fire in the air or at high temperature, it is difficult to catch fire and the fire will not spread quickly. And when the combustion source is removed, the burning will stop immediately. B2 Class: Combustible building materials: Combustible materials have a certain flame retardancy. In case of fire in the air or at high temperature, it will immediately burst into flames and it is easily to spread fire, such as wooden column, wooden roof truss, wooden beams and wooden stairs, etc. B3 level: Inflammable building materials: It has no flame retardant effect, and it is extremely inflammable, and the risk of fire is high. Classification of exterior wall thermal insulation materials according to fire rating: 1. Thermal insulation materials with A-level combustion performance Rock wool, glass wool, foam glass, foamed ceramic, foam cement, hole-closed perlite, etc. 2, Thermal insulation materials with B1-level combustion performance: Extruded polystyrene board (XPS) after special treatment / polyurethane (PU) after special treatment, phenolic aldehyde, gelatine powder polystyrene granule, and etc. 3. Thermal insulation materials with B2-level combustion performance: Molded polystyrene board (EPS), extruded polystyrene board (XPS), polyurethane (PU), polyethylene (PE), etc.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range