Q:Can plastic tubes be used for plumbing applications?

Yes, plastic tubes can be used for plumbing applications. Plastic pipes, such as PVC (polyvinyl chloride) or PEX (cross-linked polyethylene), are commonly used for various plumbing purposes, including water supply lines, drainage systems, and waste pipes. They offer several advantages such as being lightweight, corrosion-resistant, and cost-effective. However, it is important to use the appropriate type and size of plastic tube that meets the specific requirements of the plumbing application.

Q:What is the thermal fuse sleeve of the wire mesh plastic composite pipe?

For each construction project, the amount of labor is calculated, including basic labor and other labor. Plus the materials for this project, including basic materials and other materials. The unit price is based on the labor value of the different types of work at that time. The value of the material is the budgeted price based on the previous market price.

Q:What's the size of the PVC pipe?

Semi hard flame retardant tube: also known as PVC flame retardant plastic pipe, PVC resin by adding plasticizers, stabilizers and flame retardants, etc., by extrusion and obtained for wire protection, the general color is yellow, red, self and so on. The pipe joint is made of a special joint and is coated with plastic adhesive. The pipe is bent freely without heating. It is supplied in bundles. Each bundle is 1000m. The above mentioned "PVC tubes" should be used in accordance with the specific material and construction methods. But the use of general residential use quota items rigid flame tube.

Q:Steel wire frame, polyethylene plastic pipe is not keel?

The composite pipe has good flexibility and is suitable for long-distance buried water supply and gas transmission pipeline system. The pipe fittings made of steel wire mesh polyethylene composite pipe are made of polyethylene electric melting pipe fittings.

Q:How to measure the ends of a building with a transparent hose?

The construction measure is often used in plastic pipe irrigation in horizontal pipe, using the principle of the connector of the connected device, both ends are open at both ends, water is the same height, close to the end of the elevation, the other end is close to the test site, slowly raise or drop action has a fixed elevation, when it has been on the elevation point the other end of the inside of the water level, height and elevation points are the same height.

Q:i connected a plastic tube about 7 or 8 inchs long onto a butane can im wondering if when i push down on the can and put a match near it can the fire go back into the can and make the can explode and if so how can i stop that from happening and y would it happened

The fire in this case is a reaction between butane from the can and oxygen from the air. If either one is missing, there can be no fire. The fire cannot propagate back up the tube, since the tube will be filled with pure butane, meaning there will be no oxygen in the tube.

Q:How to remove dirt on the inner wall of plastic pipe?

With a wire wrapped in absorbent cotton, soaked in water, put into the plastic pipe, wet the pipe wall, pull out the wire, stained with cleaning materials, second times into the plastic pipe, wipe back and forth, and then washed with water.

Q:What are the differences between rigid flame retardant pipes and semi rigid flame retardant plastic tubes? Who knows?

Metal flexible pipe, also called prica metal casing, the galvanized steel strip, strip, and electrical paper with a double-layer metal flexible wire, cable protection tube, according to different purposes, different models, including LZ-4, LV-5, LV-5Z and other models, using a dedicated pipeline connecting connector, bending freely, fixed the special fixing clamp, coil, eachGenerally, the diameter of the disc is between 5--50 meters.(1) rigid PVC pipe: PVC resin by adding stabilizer and lubricant additives by kneading, rolling, plasticizing, granulating, extrusion processing, and acid-base, heating bending and cooling is available. The utility model is mainly used for protecting wires, cables, casings, etc.. Pipe length generally 4m/ root, the color is generally gray. Pipe connections are generally heating, spigot and socket connections, and plastic hot air welding. The bends must be heated.(2) rigid flame retardant tube: rigid PVC tube, also known as PVC cold bending pipe, divided into light, medium, heavy. Pipe length is generally 4m/ root, the color is white, pure white, bending needs special bending spring. Pipe connections using special joint insertion connection, the connection with the special surface coating adhesive, sealing interface.(3) semi hard flame tube: also called PVC flame retardant plastic pipe, PVC resin by adding plasticizer, stabilizer and flame retardant agent economy molding, used for wire protection, the general color is yellow, red, white, etc.. The pipe joint is made of a special joint and is covered with plastic adhesive. The pipe is bent freely and needs no heating. It is supplied in bundles of 100 meters each.

Q:How can PE plastic pipe be welded with PVC plastic?

PE welding with hot melt machine, PVC can not be welded, only adhesive, water supply glue, drainage glue

Q:How do you cut plastic tubes to size?

To cut plastic tubes to size, you can use a few different methods depending on the thickness of the tube and the tools available. Some common techniques include using a hacksaw, a PVC pipe cutter, or a utility knife. It's important to measure and mark the desired length accurately before cutting, and to apply steady pressure while cutting to ensure a clean and straight cut.