Natural Flake Graphite With Good Delivery Time NFG

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT or LC
Min Order Qty:
0 m.t.
Supply Capability:
20000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Description of Natural Flake Graphite

1.Types:High-purity graphite,high carbon grahite.

2. Specifications:The particle size ranges from (325mesh-35mesh),

   and the carbon content ranges from85 to 99.9%.

Regular Specification of Natural Flake Graphite

TypeSpec.Size(%)Carbon Contents (%)Moisture (%)
Screen OversizeScreen undersize
High Purity Graphite32 mesh≥80
≥99.9≤0.5
50 mesh
80 mesh
100 mesh
150 mesh≥75
-100 mesh
≥80
-200 mesh
High Carbon Graphite32 mesh≥80
94-99≤0.5
50 mesh
80 mesh
100 mesh
150 mesh≥75
-100 mesh
≥80
-200 mesh
Middle Carbon Graphite32 mesh≥80
85-93≤0.5
50 mesh
80 mesh
100 mesh
150 mesh≥75
-100 mesh
≥80
Fine Graphite-200 mesh
≥80
≤0.5
-320 mesh
Micro Grade
D50=2um
80-99.9≤0.5


Packaging & Shipping of Natural Flake Graphite

Packaging: 1.25MT jumbo bags or 1MT jumbo bags

Delivery details: according to customers’ requirements

Application of Natural Flake Graphite

1.Used as release agent lubricant in the production of chemical industrial catalyzer.

2.Used as high temperature resistance lubricant base material,erosion resistance lubricant base material.

3.Used as powder metallurgy release agent and metal alloy material.

4.Suitable for making graphite refractory bricks.

Pictures

Natural Flake Graphite with Good Delivery Time NFG

Natural Flake Graphite with Good Delivery Time NFG



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Who knows how to divide the building fire grade and fire resistance grade?
I hope to help you building fireproof rank division is one of the most basic measure in building fire safety technical measures, Building's fireproof rank is divided into class one, two, three, four according to China's architectural design specification. Fire-resistant capability of the highest level is the strongest; Fire resistance of four level of the weakest. The fire resistance level of a building depends on the combustion performance and fire resistance of the building components that comprise the building. The so-called building component refers to a series of basic components, such as wall, foundation, beam, column, floor, stair, ceiling and so on. The judgment condition of the fire resistance There are three conditions for components' fire resistance limit to be reached, namely, the fire resistance limit of the building component: Loss of support and integrity; loss of time to fire the role of the time; as long as any of these three conditions is met, it will reach its limit of fire. Hope my answer will help you.
Q:What a blast furnace refractories generally?
Usually metal anchorage plus wear-resistant refractory spray paint. at the middle part we use high alumina bricks, corundum bricks. high duty refractory is important in improving bosh furnace lining.
Q:What are the specific steps of stirring the steel ladle castable?
Steps are as follows. 1 Compulsory mixer is used to stir the castable and bags, rope and other debris can not mix in the castable when stirred. 2, Castable should be unpacked on the scene. Stirred volume depends on the capacity of the mixer. Castable should be accurately measured and put into a blender. 3 The process of first dry mixing and then wet mixing is adopted. After the castable is added to the mixer, it is dryly mixed for 2 minutes, add about 5.2 to 5.5 percent of water and continue to add water while stirring. Water that is 80% of the total should be added, and then decide whether to continue to add or not depending on the consistence (noting that the water must be clean water and sewage can not be used). Then it is wetly mixed for 4 minutes and stirred for not less than 6 minutes at one time, until castable is even. In general, the bottom is slightly dry and the wall of the ladle is slightly dilute (the amount of water is only for reference). 4, The amount of water and mixing time should be controlled strictly when stirred to ensure that the needs of the consistency are met. If castable is too thin, it will seriously affect the quality of the material. The stirred volume, stirring time and water that is added should be consistent and they can not suddenly be thick or suddenly be thin. If the consistency does not meet the requirements, the castable should be put back to the mixer and stirred with appropriate water or dry materials. 5, It should be stirred evenly and casting should finish in 20 minutes, in order to avoid sclerosis, affecting structural strength of ladle lining 6, After each completion of construction, varieties of castable should be changed and the mixer should be cleaned 7, Stirring can stop in halfway. If the mixer breaks down and it can be repaired in a short time, some of the materials have to be removed before the machine is opened. If the machine can be repaired on time, castable refractory should all be removed.
Q:What crusher is used for raw material of broken refractory material? What is the rough crushing process? What are the materials? Thank you!
Common faults and causes of magnetic separator. 1. Motor of magnetic separator is overheated and its sound is not normal. Reasons for this failure are: 1) lubrication of bearing is bad or badly worn; 2)fan blade falls off or wears; 3)bad contact of switching circuit or disconnected to run a single phase; 4) voltage is too low. 2. Reasons for this failure due to overheated speed reducer are: 1) lack of oil or poor kerogen; 2) wear between gear and worm, or poor mesh; 3)poor lubrication of bearing or serious wear. 3. The sound of magnetic separator during operation is abnormal, lattice ball mill. Cylinder is stuck by obstacle, and even the cylinder can not rotate. The bottom box vibrates. Reason for this failure is often that it is stuck by objects in drag flask, otherwise magnetic patch falls off so that the cylinder screaks and pierce tube when it is serious. At this time, car should be stopped for maintenance and troubleshooting. Only when we master common faults and reasons of magnetic separator can we timely identify problems and solve problems. Better maintenance and repair of magnetic separator equipment are an important prerequisite to properly use equipment and ensure the construction.
Q:what's the varieties of thermal insulation material with A level fire rating?
Inorganic thermal insulation material can do it, such as glass wool,rock wool,foam glass,etc. phenolic foam materials in organic foam material is special. phenolic foam not only has good thermal insulation properties but also can be composited with steel plate and other materials, A class thermal insulation materials that reach A class combustion performance include: rock (mine) wool, foam glass, EVB, etc. thermal insulation materials with A class combustion performance mainly include: phenolic aldehyde,gelatine powder polyphenyl granule, etc. thermal insulation material of fire barrier zone can use rock (mine) wool, foam glass, EVB and other materials with A class combustion performance.
Q:How to measure the influence of high-temperature performance of the products refractory in the formation of the liquid phase.
Seeing whether it can affect the usage of the refractory material, and seeing to reduce the impurity, what's the condition of temperature of the liquid phase. Practically, whether it has any difference if you can improve, load under load and creep and reduce the impurity content. In the refractories, producing liquid are the influence of impurities, high temperature resistant strength, compared the use of the refractory material temperature: testing compressive strength after burn. If there are any impact: knowing the main crystal phase of matrix composition and content, improving the content of the main crystalline phase can improve the high temperature performance of refractory materials.
Q:What high-molecular polymers can be used as fire-resistant material binder?
Melamine resin should be compounded with fire-resistant material and acrylic acid material is easy to burn. But high-molecular polymers can be used along with the above two. Polysulfone is featured by heat resistance and high temperature resistance. Polyurethane is difficult to process and compound with fire-resistant material. Phenolic resin is not easy to burn. Epoxy is expensive and self-extinguishing once away from fire.
Q:Are the rubber insulation materials are refractory materials?
It's not.
Q:Why do magnesium oxide refractory bricks can be made into refractories?
Nature: It is loose white powder and tasteless. When exposed to the air, it is easy to absorb moisture and carbon dioxide. It is dissolved in acid and ammonium salt and insoluble in water and ethanol, with the melting point of 2800 and the boiling point of 3600. The magnesium oxide has high fire-resistance insulation properties, with high melting point . It can be said to be non-combustible materials.
Q:The structure of refractory material

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range