Standard Size: 595mm*595mm, 605mm*605mm
Standard Thickness: 9, 10, 12, 14, 15, 18mm
Edge Detail: Square Edge, Tegular Edge (≥12mm)
Technical Data of Mineral Fiber Ceiling:
Fire resistance: Class B1 (standard GB 8624-1997)
Moisture rate (%): ≤3.5 (40℃,70%RH)
Light reflect: 0.70-0.80
Sagging resistant properties: ≤0.35mm
Humidity Resistance: ≥85%
Typical Application Areas of Mineral Fiber Ceiling:
Hotel Lobbies and Corridors
Offices and conference rooms
Hospitals and other Public areas
- Q:Po Chun 730 tail door decoration plate is what color
- The interior is colored, brown + beige.
- Q:Formaldehyde is one of the most common pollutants released by some inferior decorative board materials?
- Yes, formaldehyde commonly known as formalin, is colorless, with a strong smell of irritating gas, its 35% to 40% of the aqueous solution known as formalin. Formaldehyde is the original pulp poison, can combine with the protein, inhalation of high concentrations of formaldehyde, there will be severe respiratory irritation and edema, eye pain, headache, bronchial asthma can also occur. Skin direct contact with formaldehyde, can cause dermatitis, stains, necrosis. Often inhalation of a small amount of formaldehyde, can cause chronic poisoning, mucosal congestion, skin irritation, allergic dermatitis, nail keratosis and fragile, nail bed finger pain, long-term inhalation of pregnant women may lead to neonatal malformations, and even death, Leading to male sperm deformity, death, decreased sexual function, serious can lead to lack of reproductive capacity, systemic symptoms are headache, fatigue, poor appetite, palpitations, insomnia, weight loss and autonomic disorders.
- Q:Uv decorative board is what?
- UV decorative plate is currently on the market the latest environmentally friendly decorative materials, the surface of UV light curing paint protection treatment, the substrate has a cement pressure plate, solid wood multilayer board, MDF, glass magnesium fire board four. UV decorative panels have more than 1500 kinds of colors to choose from, there are natural imported veneer high-grade solid wood UV decorative panels, bright color simulation up to 99.5% of the stone pattern UV decorative panels, magnificent gold foil UV decorative panels, such as diamonds shining Bright UV decorative panels such as UV decorative plate smooth and smooth, wear-resistant, scratch-resistant, resistant to corrosion, heat and cold.
- Q:304 stainless steel decorative board price is probably how much
- Titanium stainless steel plate the deeper the color, the more expensive, especially good
- Q:What is the relationship between Li Mei diatomian decorative plate and natural home diatom mud?
- Are diatom mud board
- Q:Do you want to use it?
- Not used to avoid burning anti-true stone composite decorative plate
- Q:Does the decorative board need to paint a layer of paint?
- Construction technology measures: 5.1 find and play line: wood wall panels should be installed according to the design Atlas requirements, in advance to find a good elevation, flat position, vertical size of the elastic line. 5.2 Check the embedded parts and holes: After the bumper line to check whether the embedded parts, wood bricks or wooden wedge meet the design requirements, spacing spacing size, position to meet the requirements of the lapel keel; measuring doors and windows and the location of the size of the vertical And design requirements are consistent. 5.3 shop, coated with moisture-proof layer: the design of moisture-proof requirements when the wooden wall, wood keel installation must find a square, looking straight, skeleton and wood between the gap should be pad mats, each brick at least 2 nails nail, And then put the keel should be set aside when the board thickness. Wood keel and wall contact surface to be anti-corrosion treatment, the remaining three sides of not less than three times the treatment of fire paint. 5.4 Lining installation: After the installation of the keel to check the qualified installation of 15mm thick woodworking board to do lining, requiring liner nail firm, nail fixed spacing control in 200mm or so, the back brush fire paint, splicing board should be reserved between the 5mm Around the expansion of the gap, to ensure that the amount of expansion and contraction of temperature.
- Q:Do you want to burn the antique stone composite panel
- It is recommended not to use the area is too large, and now the decorative material is almost no environmental protection, most of the material on the body are harmful, as little as possible to use, so that you can let the harmful material distribution less. As far as possible with some environmentally friendly materials, because health is the most important
- Q:Do the car outside the door decoration and post-column decorative panels?
- ASA resin has excellent mechanical properties, good thermal stability and significant weatherability, compared with ABS, ASA resin has better resistance to chemicals and environmental stress cracking performance. Even after a long period of sun and rain, there will be no discoloration, and can withstand hot water treatment and cleaning agents.
- Q:Plastic decorative plate of plastic decorative plate of raw materials
- Surface paper is placed on the top of the decorative plate, impregnated resin and hot pressing, with a high degree of transparency and hard, play a protective decorative plate surface role. This paper is thin, white, clean, and has a high absorption performance.
The bottom of the paper used to make the decorative plate of the substrate, so that the plate has a certain thickness and strength, is to create an important material decorative plate, 80% of the amount of paper, the paper content of low ash, requires a higher absorption performance and Wet strength. Commonly used non-waterproof agent of kraft paper for its base paper.
SERENITY,is a large company which produces light mineral wool acoustic board. It displays a good combination of production , manufacture, supporting sales and international trade.Its products cover more than twenty varieties of six categories, including knurling board, relief-embossing board, printing board, spraying board, stereo-molding board, etc.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
||Japan, Italy, South- Africa ,India, Russia, Malaysia, Singapore, Taiwan and other countries and areas
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range