Standard Size: 595mm*595mm, 605mm*605mm
Standard Thickness: 9, 10, 12, 14, 15, 18mm
Edge Detail: Square Edge, Tegular Edge (≥12mm)
Technical Data of Mineral Fiber Ceiling:
Fire resistance: Class B1 (standard GB 8624-1997)
Moisture rate (%): ≤3.5 (40℃,70%RH)
Light reflect: 0.70-0.80
Sagging resistant properties: ≤0.35mm
Humidity Resistance: ≥85%
Typical Application Areas of Mineral Fiber Ceiling:
Hotel Lobbies and Corridors
Offices and conference rooms
Hospitals and other Public areas
- Q:What is the decorative plate for the top of the elevator car?
- At present, the market is still the most used stainless steel, but in recent years there have been glass products, plastic products, composite board products, and even with marble, copper, aluminum and other special materials, when some car material or style is more special You can use these special materials supporting the product
- Q:Geely Golden Eagle cross how to dismantle the door trim
- First of all, the door handle screws and other parts of the screw off, and then in the pry open on it. I hope my answer will help you.
- Q:How to install the decorative panels on the backcourt of BYD
- Generally push directly, it is recommended to look at the instructions
- Q:Seeking Haver M2 car door trim panels demolition methods, as well as the door inside the door demolition method.
- And then a glass edge of a triangle trim board unloaded, and then pull out the door can be a vertical
- Q:Pentium 70 door mounted sound insulation cotton trim board card card is not tight what is the reason
- Hello, this situation, it should be you put the sound insulation place wrong!
- Q:What is the general thickness of the wall water decoration board?
- Cement pressure plate common specifications for the 1220mm × 2440mm × 2.5-100mm, or 1200mm × 2400mm × 2.5-100mm. According to the density can be divided into low density, medium density, high density category. Which is more commonly used in high-density sheet.
- Q:Is the decorative plate used in the interior to hurt the human body?
- Less use of some no problem if the larger area should use some of the better quality of the board. After the decoration is best to put 10 days. At check in.
- Q:What are the functions of inorganic pre-coated decorative panels?
- Excellent fire resistance
The GB / T 5464-99 test showed that the inorganic precoat decorative plate material is not combustible, the panel will not melt, drip or explode, to maintain long-term characteristics. Inspection by the National Fire Materials Testing Center, the noncombustibility of GB8624-A level, and its performance is far better than the A standard. The smoke density, smoke tip height, flue gas humidity and the average concentration of combustion and other indicators have reached or exceeded the A-class composite material standards.
- Q:Do the car outside the door decoration and post-column decorative panels?
- Kumho developed heat ASA XC230, mainly used in automotive taillights, rearview mirrors, radiator grille, door column decorative panels, window frames, outside the triangular block, roof ventilation fence, streamlined shell And light shell and other external parts. Due to its good weather resistance and surface gloss, the stained ASA XC230 can directly replace the painted ABS, reducing the painting process, more environmentally friendly, more economical, and do not worry about the paint off the problem.
- Q:Example: gypsum decorative plate specifications for the 500 * 500mm, the patchwork width of 2mm
- According to the area to count 41, and the actual decoration of the area when the length and width of the requirements of the block number is very different, length and width of the gypsum board size is not an integer, it may be part of the cut into waste.
SERENITY,is a large company which produces light mineral wool acoustic board. It displays a good combination of production , manufacture, supporting sales and international trade.Its products cover more than twenty varieties of six categories, including knurling board, relief-embossing board, printing board, spraying board, stereo-molding board, etc.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
||Japan, Italy, South- Africa ,India, Russia, Malaysia, Singapore, Taiwan and other countries and areas
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range