LED T5 Integrated Tube SMD Chip High Efficiency 0.6M 7W

Ref Price:
$6.92 / pc
Loading Port:
Shenzhen
Payment Terms:
TT
Min Order Qty:
10 Pcs pc
Supply Capability:
100000 Pcs Per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

LED T5 Integrated Tube SMD Chip High Efficiency 0.6M 7W 1. This product meets the standard of CE certification.
2. With internal No-isolated power supply.
3. Round and the elliptical tube are available.
4. Use the most mature international well-known LEDSMD2862 as the light source, which can ensure the led tub35 as the light source, which can ensure the led tube brightness and long lifetime, also can reduce the light decay.
5. Use the high quality aluminum PCB for LED’s better heat dissipation.
6. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and frosted PC cover are available.
7. 180 degrees beam angle makes the lighting effect better.
8. CRI(standard products)>70,it can be over 80 if required.
9. Ambient temperature:-20°C-40°C, surface temperature: 42°C-45°C
10. No mercury, lead or other hazardous materials; no radiation, no electromagnetic radiation, no frequency flash, instant start up, no hurting eyes.
Applications:
Replacement for conventional fluorescent tubes:
1. Hotels
2. Conference/ meeting room
3. Commercial Complexes
4. Residential/ Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General li

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How does the lamp line connect
If it is converted by fluorescent lamp tube into LED lamp tube, want to remove the regenerator and the ballast. The two wires connected to A1 and A2 have been turned into a thread, and the two wires connecting B1 and B2 are also twisted into one line and are connected to the two ends of 220V respectively.
Q:Why is the household daylight lamp attached to the battery?
Because there's electricity in the battery.I hope my answer will work for you.
Q:How long does the energy-saving daylight lamp tube change?
Fluorescent lamp use time is long, the brightness is low is normal [because of the efficiency of fluorescent powder is reduced, cause lamp tube brightness drops]. The general store is not convenient to replace at any time, it is better to replace it at once. If you increase the density of the light, the light efficiency of the tube will not increase much, and the energy will increase with the opening of the tube, a little waste. A one-time change is a lot of input and a lot of it is compared to the actual computation.
Q:What does philips mean by TLD36w / 54-765
54 ~ 127 straight fluorescent lamps, brightness 765 - the color coefficient is 70% color temperature 6500k Hope is the information you need
Q:What does LED light tube integration mean
One is to put the tube stents together, the installation is convenient, the power supply can be used; The branch is the lamp tube and the bracket are separate, want to set the bracket to be fixed first, then installs the lamp tube, change maintenance only need to replace the lamp tube can.
Q:Help me see the yellow on the left side of the LED fluorescent lamp
The black patch in the rear of the capacitor is the MOS tube, the electric inductance behind the MOS tube, the optical coupling behind the inductance, and the electrolytic capacitance behind the optical coupling.
Q:Why do LED bulbs have stroboscopic frequency? The camera
It's a huge secret to be able to look at led lights and take a camera, and god lets you discover a huge secret, hehe. Secretly tell you You use your camera to photograph corrugated and stroboscopic, indicating that your led tube is a product that is resistant to pressure and pressure, not a product that is heng-current. Stroboscopic because domestic voltage changes back and forth between 180-260 - v, voltage changes in current led products to you after the impact, and your drive is not out of constant pressure, will only make the led lamp bead to under the impact. Simply put, your led tube is not very good, and it will soon be weak and not very long. Ask you to buy the time to ask clear, the lightning led lamp tube and the bracket on Tmall is the cross current constant pressure, can go to see. I hope I can help you
Q:Put on the new light bulb, why the lamp still not bright
Does your fluorescent lamp use a inductive ballast or an electronic ballast? Is the newly installed lamp tube not bright or filament red but unable to start? If the inductor is completely unlit, check to see if it is installed
Q:Fluorescent fluorescent lamp tube can replace led fluorescent lamp tube?
When installing, the ballast is removed directly from the left and right side of the fluorescent lamp. No need to replace the lamp holder, which is completely universal.
Q:Leds are the ones that are brightest
The fluorescent lamp of the transparent shade is sure to be the brightest, but it is completely transparent. LED fluorescent lights are half plastic and half aluminum; Full plastic tube (aluminum); Glass tube; All PC tube, etc.
Focus on environmentally friendly LED intelligent lighting products are obtaining CE, ROHS, CCC and other domestic and international authoritative certification; product sales in the domestic market to maintain continuous growth, and exported to Europe, America, Southeast Asia more than 10 countries.

1. Manufacturer Overview

Location Shenzhen,China
Year Established 2011
Annual Output Value
Main Markets

Mid East;Western Europe
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Dongguan
Export Percentage
No.of Employees in Trade Department 50-100 People
Language Spoken: Chinese
b)Factory Information  
Factory Size: Above 1,500 square meters
No. of Production Lines About 5
Contract Manufacturing OEM Service Offered;Design Service Offered
Product Price Range Cheap